MAGCUBIC HY300 Portable Projector User Manual

Attention

Please read this manual carefully before use and keep it for future reference.

• The projector is non dustproof or waterproof.
• To reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
• Please use the original power adapter. The projector should work under the specified rated power supply.
• When the projector is working, do not look directly into the lens, as the strong light may flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
• Do not cover the projector vents. Heating will reduce the life of the projector and may cause danger.
• Regularly clean projector vents, as dust may cause cooling malfunction.
• Do not use the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals can cause malfunction.
• Please handle with care during daily use.
• Please cut off the power if the projector is not in use for a long time.
• Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Structure Description

This manual is for reference only. It is subject to change without prior notice. MAGCUBIC reserves the right of final interpretation.

Remote Component and Functions

The projector features several ports and controls:

• ON/OFF: Power button.
• HDMI: High-Definition Multimedia Interface port.
• Headset jack: For audio output.
• USB: Universal Serial Bus port for media playback or power.
• POWER: Power input port.
• Vent: Air vents for cooling.
• ROTATE: Adjustment for projector angle.
• Focus Wheel: Located on the back for adjusting image sharpness.
• Lens: The projection lens.
• Air inlet: For air intake.

Remote Control Functions

The remote control includes the following buttons:

• ON/OFF: Powers the projector on or off.
• MENU: Accesses the main menu.
• SOURCE: Selects the input source.
• DIRECTIONS (Up, Down, Left, Right): Navigates through menus.
• OK: Confirms selection.
• HOME: Returns to the home screen.
• RETURN: Goes back to the previous screen.
• VOLUME- / VOLUME+: Adjusts the volume.
• MUTE: Mutes or unmutes the audio.

Power ON/OFF

Long press the Power button on the projector or the remote control for 3 seconds to turn the projector on or off.

Focus Adjustment

When the projector is on, adjust the sharpness by turning the focus wheel on the back of the projector.

Launcher UI

The main interface provides access to various functions:

• Media: Accesses video, music, photo, and book files.
• Wifi: Connects to wireless networks.
• Bluetooth: Connects to Bluetooth devices.
• Wired screen: For wired screen mirroring.
• Wireless screen: For wireless screen mirroring.
• HDMI: Selects HDMI as the input source.
• Setting: Accesses system settings.

Wi-Fi

Navigate to Wifi Setting to choose a network and enter the password to connect.

BT Setting

In BT setting, turn BT ON, click 'Refresh Device' and select the desired device to pair.

Image Mode

Navigate to Setting > Picture Settings > Image Mode to select from four available modes: Standard, Dynamic, Mild, User, according to your application scenario.

Color Temperature

Navigate to Setting > Picture Settings > Color Temperature to select from three available modes: Cold, Standard, Warm, according to your application scenario.

OSD Language

Navigate to Setting > System Settings > OSD Lang to choose your preferred language (e.g., English, Chinese, French).

Home Background

Navigate to Setting > System Settings > Home Background to choose your desired background color (e.g., Blue, Dark blue, Grey).

Projector Mode

Navigate to Setting > System Settings > Flip to select the projection mode: Front Table, Front Ceiling, Back Table, Back Ceiling.

Factory Restore

Navigate to Setting > System Settings > Factory Restore to reset the system. User data will be cleared.

Keystone

Navigate to Setting > Keystone to choose between auto keystone and manual keystone adjustment.

Media Player

Insert a U disk and click the USB icon on the homepage to access local video, music, photo, and book files.

HDMI Signal

Connect the projector to an external source device using an HDMI cable. Select HDMI on the homepage to transmit the signal.

Wired Screen

iOS connect by Cables

1. Connect your iPhone to the projector using the original iPhone charging cable (which has a USB port and Lighting Port).
2. Click "Trust" when the iPhone displays a pop-up window.
3. Enter your device password.

Android Connect by Cables: Confirm to open ElfCast in the pop-up window of your phone. It can automatically connect to the same screen.

Wireless Screen

(The Android Mobile/Pad must be on the same network as the projector device.)

Miracast:

1. Open the settings menu on your Android Mobile/Pad.
2. Access your display settings or screen mirroring.
3. Select your Miracast receiver: PROJECTOR-XXXX.

General Wireless Screen Mirroring:

1. Open the settings menu on your Android Mobile/Pad.
2. Access your display settings or screen mirroring.
3. Select the device name.

DLNA

(The phone/Pad must be on the same network as the projector device.)

1. Open your preferred video playing app.
2. Click the TV icon and select the device name: PROJECTOR-XXXX.

iOS Cast

iOS Cast AP

Connect with iOS Phone via screen mirroring:

1. Open WIFI and find the device name from your phone. Then input the password on your phone.
2. Click Airplay/Screen mirroring on your phone and connect the projector.

iOS Cast

(The phone/Pad must be on the same network as the projector device.)

1. Open your iPhone Control Centre and select Screen Mirroring.
2. Click the device name.

Safety Instructions

• Please pay attention to important information related to the operation and maintenance of the projector. Reading this information carefully can help avoid problems and increase the projector's lifespan.
• Consult qualified personnel for installation and repair services. Do not use damaged wires, accessories, or other peripherals.
• Keep the projector away from flammable, explosive materials, and strong electromagnetic interference (e.g., large radar stations, power stations, substations). Avoid strong ambient light, including direct sunlight.
• Do not cover the projector vents.
• Use only the original power adapter.
• Ensure adequate ventilation and that vents are not covered to prevent projector overheating.
• When the projector is working, do not look directly into the lens, as the strong light may flash your eyes and cause slight pain.
• Do not bend or drag the power cord.
• Do not place the power cord under the projector or any heavy objects.
• Do not cover the power cord with soft materials.
• Do not heat the power cord.
• Avoid touching the power adapter with wet hands.

Disclaimer

This manual provides general instructions. The pictures and functions described herein are subject to the actual product. MAGCUBIC is committed to improving product performance and reserves the right to modify product functions and interfaces without prior notice.

Please keep your device properly. MAGCUBIC is not responsible for any loss caused by incorrect operation of software/hardware, unauthorized repairs, or any other reasons. MAGCUBIC is also not responsible for any third-party claims.

This manual has been carefully checked by professional engineers; please understand that any omissions are unintentional.

Thank you for your purchase!

Need help? Please send an email with the item name in the subject line to our Brand Support Team at magcubic@163.com for a better experience and prompt reply.

Attention: Please do not look directly into the lens when projecting to prevent the strong light from harming your eyes. Children should use the projector under the supervision of adults.

Documents / Resources

• MAGCUBIC HY300 Portable Projector [pdf] User Manual

References

• User Manual