FPC SECURITY FPC-6357 Door Access Control
OVERVIEW
ATTENTION! QUICK TIPS, MUST READ BEFORE INSTALLING
- You will only need to hardwire the power supply to the mini Receiver and from any electric lock to the receiver .
- The Keypad and Exit Button are 100% completely wireless. Installation is easier, no wire is needed to connected these devices. Just mount it on the wall and you are good to go .
- In order to properly install this kit it is recommended that you use 18/2 or 20/2 gauge wire . . Before installing this kit, check with your local fire Authority for the compliance of fire codes .
- We are not responsible for the improper Installation of this kit. This is an example of how it should be installed but all applications are different.
- If you are not handy with electrical components, please consult with a certified electrician or Locksmith .
- Make sure that when you are installing this kit, please have all components turned
Need assistance? Contact Us: 1-888-504-3318 II support@fpc-security.com II www.fpc-security.com
Documents / Resources
 |
FPC SECURITY FPC-6343 One Door Access Control [pdf] Installation Guide FPC-6343, FPC-6344, FPC-6345, One Door Access Control |
