FPC SECURITY FPC-6357 Door Access Control Installation Guide

Contents hide

You will only need to hardwire the power supply to the mini Receiver and from any electric lock to the receiver.
The Keypad and Exit Button are 100% completely wireless. Installation is easier, no wire is needed to connect these devices. Just mount it on the wall and you are good to go .
In order to properly install this kit it is recommended that you use 18/2 or 20/2 gauge wire . . Before installing this kit, check with your local fire Authority for compliance of fire codes.
We are not responsible for the improper installation of this kit. This is an example of how it should be installed but all applications are different.
If you are not handy with electrical components, please consult with a certified electrician or Locksmith.
Make sure that when you are installing this kit, please have all components turned