FOS technologies IP65 FOS Phantom BAR Light
Specifications
- Installation methods:
- Stand in ground by floor bracket
- Mount in truss by omega bracket and clamp
- Vertical suspension via side M8 hole with Clamp
- Vertically installed by Base stand (optional)
- Seamless spliced all around
- Product Dimension: [Dimensions information]
Product Information
The FOS Phantom BAR IP65 fixture is designed for professional lighting applications. It features a robust construction suitable for various mounting options and environments. The fixture uses passive heat dissipation to maintain optimal performance.
Safety Instructions
- Rated voltage range: AC110V-120V/60Hz or AC200V-240V/50HZ
- Keep fixture at least 1 meter away from flammable materials
- Operating temperature range: -15°C to 40°C
- Surface temperature of the lamp should not exceed 60°C
- Avoid exceeding IP65 protection range and permanent outdoor installations
- Ensure proper grounding before use
- Regularly inspect and maintain fixtures for safe operation
- Clean the fixture weekly to prevent dust accumulation
Menu Layout
The LED display menu provides access to various settings including DMX address, modes, colors, dimmer curves, and system information. Use the key instruction buttons to navigate the menu and confirm selections.
DMX Channels Chart
The fixture supports different DMX channel configurations ranging from 2 to 92 channels, allowing for control over various functions such as dimming, color mixing, and effects.
Product Usage Instructions
Installation
Follow one of the installation methods provided in the specifications based on your setup requirements. Ensure the fixture is securely mounted to prevent accidents.
Operation
Power on the fixture and navigate the LED display menu using the key instruction buttons. Adjust settings such as DMX address, colors, and dimmer curves as needed.
Maintenance
Regularly clean the fixture to prevent dust buildup, ensuring optimal cooling and light output. Inspect and reinforce base, screws, and clamps to maintain fixture stability.
This manual contains important information. Please read before operating fixture.
Safety Warning
To reduce the risk of fire, electric shock, or injury to persons, follow these important safety instructions:
- non-qualified personnel, not to disassemble the light arbitrarily and lighting accessories inside.
- rated voltage range: AC110V-120V/60Hz or AC200V-240V / 50HZ (to be selected).
- Do not install near flammable materials, the fixture should be kept at least 1 meter distance.
- lamps used in ambient temperature: -15 ℃ -40 ℃, the highest temperature of the surface of the lamp: 60 ℃.
- Do not keep the fixture in conditions that exceed the IP65 protection range, don’t use in permanent outdoor installations.
- before using the fixture, must ensure the good grounding.
- Ensure the safe installation of the fixtures and perform and regular inspection.
- lamps consecutive working time, is not recommended to exceed 10 hours.
- Stop using the fixtures, when abnormalities occur during the operation session.
- Fixtures base, screws, clamps, should be regular inspected and reinforced in a timely manner to prevent any accident.
- The fixture uses passive heat dissipation, and its surface can easily accumulate dust, so you must clean it weekly to maintain proper cooling and light output.
Technical Specifications
- Voltage: 100-240V 50-60Hz
- Power consumption: 180W
- LEDs: 18 x 10W RGBWA 5in1 LED
- LED feature: Each Led pixel individual control
- LED Approximate lifespan: 20000 hours
- Lens Beam Angle: 20°
- With Linear Electronic Frost
- Control mode: DMX512, Master-slave, Auto, RDM
- DMX Channels: 2CH / 6CH / 9CH / 92CH / 94CH
- Display: OLED display with 4buttons
- Power: PowerCON in/out
- Signal: 3pin XLR in/out
- Waterproof rate: IP65
- Size: 1006 x 140 x 188 mm
- Net weight: 10.25 KG
Installation methods
- Stand in ground by floor bracket
- Mount in truss by omega bracket and clamp
- Vertical suspension via side M8 hole with Clamp
- Vertically installed by Base stand (optional)
- Seamless spliced all around.
Product Dimension
Key instruction：
| Button | Meaning |
| M | Menu/back |
| E | Enter/confirm |
| ▲ | up |
| ▼ | down |
- All the features selected by pressing the “E” key to confirm
- Screen Password: E-▲-▼-▲-▼-E
LED Display Menu
| Menu | Item1 | Item2 | Item3 |
| DMX Address | DMX Address | 001–512 | |
| MODE | DMX mode | 2CH
6CH 9CH 92CH 94CH |
|
| Slave | |||
| Auto | Auto | 01-15 | |
| speed | 01-10 | ||
| Static | Dimmer | 000-255 | |
| Colour | 01-51 | ||
| Red | 000-255 | ||
| Green | 000-255 | ||
| Blue | 000-255 | ||
| White | 000-255 | ||
| Yellow | 000-255 | ||
| Fog | 000-255 | ||
| Strobe | 00-20 | ||
| Setting | Display Flip | On/Off | |
| Off Screen | Off 20s 40s
60s |
||
| Locking Key | On/Off (Password: E-▲-▼-▲-▼-E) | ||
| DMX State | DMX hold
Black out |
||
| Dimmer Curve | Linear Curve
Exponential |
||
| Logarithmic
S-curve |
|||
| Dimmer Response | LED
Halogen Stage Theatre |
||
| White balance | Yes/No | ||
| Factory reset | YES/NO | ||
| System info | Firmware | Hardware version | 18K10W V1.02 |
| Software version | 18K10W V3.05 | ||
| Temperature | Temp Unit | Celsius Fahrenheit
Kelvin |
|
| LED pad | xx°C | ||
| RDM UID | RDM UID xxxxxxxxxxxx | ||
| Time
information |
Usage time
Total time |
||
DMX Channels Chart
2 Channels
| Channel | Value | Function |
|
1 |
0-4 | Null |
| 5-9 | Color 1 | |
| 10-14 | Color 2 | |
| … | …. | |
| 255-255 | Color 51 | |
| 2 | 0-255 | Electric frost |
6Channels
| Channel | Value | Function |
| 1 | 0-255 | Electric frost |
| 2 | 0-255 | Red 0%-100% |
| 3 | 0-255 | Green 0%-100% |
| 4 | 0-255 | Blue 0%-100% |
| 5 | 0-255 | White 0%-100% |
| 6 | 0-255 | Amber 0-100% |
9Channels
| CH | Value | Function |
| 1 | 0-255 | Dimmer |
| 2 | 0-255 | Electric frost |
| 3 | 0-255 | Auto |
| 4 | 0-255 | Auto speed/Led strobe |
| 5 | 0-255 | Red 0%-100% |
| 6 | 0-255 | Green 0%-100% |
| 7 | 0-255 | Blue 0%-100% |
| 8 | 0-255 | White 0%-100% |
| 9 | 0-255 | Amber 0%-100% |
92Channels
| CH | Value | Function |
| 1 | 0-255 | Dimmer |
| 2 | 0-255 | Electric frost |
| 3 | 0-255 | Red1 0%-100% |
| 4 | 0-255 | Green1 0%-100% |
| 5 | 0-255 | Blue1 0%-100% |
| 6 | 0-255 | White1 0%-100% |
| 7 | 0-255 | Amber1 0-100% |
| … | … | … |
| 88 | 0-255 | Red18 0%-100% |
| 89 | 0-255 | Green18 0%-100% |
| 90 | 0-255 | Blue18 0%-100% |
| 91 | 0-255 | White18 0%-100% |
| 92 | 0-255 | Amber18 0-100% |
94Channels
| CH | Value | Function |
| 1 | 0-255 | Dimmer |
| 2 | 0-255 | Electric frost |
| 3 | 0-255 | Auto |
| 4 | 0-255 | Auto speed/Led strobe |
| 5 | 0-255 | Red1 0%-100% |
| 6 | 0-255 | Green1 0%-100% |
| 7 | 0-255 | Blue1 0%-100% |
| 8 | 0-255 | White1 0%-100% |
| 9 | 0-255 | Amber1 0-100% |
| … | … | … |
| 90 | 0-255 | Red18 0%-100% |
| 91 | 0-255 | Green18 0%-100% |
| 92 | 0-255 | Blue18 0%-100% |
| 93 | 0-255 | White18 0%-100% |
| 94 | 0-255 | Amber18 0-100% |
Optional base Installation
2lights combine need via a connect part as below, Max. 2lights combine when Vertical no matter use Base stand or via side M8 hole with clamp.
Connect parts(optional):
How to install the connect part:
- First: 3 screws tightened by hand or tool in one light
- Second: 3screws tightened by hand or tool in another light
- Third: use tool clockwise rotate 90o to hookup in both lights
Base Stand(optional):
How to install the Base Stand:
- First step: 3 screws tightened by hand or tool
- Second step: use tool clockwise rotate 90o to hookup
Warranty Card
- Name
- Model
- Production Purchase
- End User
- Company Name:
- Add:
- Sale Store
- Link man:
- Tel: Stamp
Description: These must be truthfully fill, seal by the end-user and point-of-sale, or else the warranty will not work (warranty period and terms, see the following)
warranty period：one year since purchase warranty terms：1、If fail when using the product in normal state, you can made under the provisions of the warranty, show the warranty card and purchase bills(copy), and enjoy free maintenance service in a specific service center or the manufacturer.
The following will be the implementation of paid service:
- Without the effective warranty card
- There’s blank, alter and no point-of-sale name
- Fail caused by bad earthing, wrong voltage supply
- Fail caused by transportation or unloading
- Fail caused by operation not described in the manual
- Fail caused by disassemble from unauthorized personnel
- Fail caused by using the unauthorized control system
Note:
Based on our company continue to improve the product, the statement containing data may have changed, without notice. Company retains its right to change specifications related when product is improved. Thank you for your understanding.
FAQ
Q: How often should I clean the fixture?
A: It is recommended to clean the fixture weekly to maintain proper cooling and light output.
Q: What should I do if abnormalities occur during the operation?
A: Stop using the fixture immediately and perform necessary inspections or repairs to ensure safe operation.
Documents / Resources
 |
FOS technologies IP65 FOS Phantom BAR Light [pdf] Instruction Manual IP65 FOS Phantom BAR Light, IP65, FOS Phantom BAR Light, Phantom BAR Light, BAR Light, Light |