Product Information
Specifications
- Model: EVO-ALL
- Compatibility: Lexus ES250 Push-to-Start 2019-2024
- Firmware Version: 79.[66]
- Manufacturer Date: After 2019
Product Usage Instructions
Installation Requirements
It is mandatory to install the hood pin switch for proper functionality. For vehicles that can be remote started with the hood open, set function A11 to OFF.
Wiring Connection
Refer to the provided wiring connection guide for proper installation. Ensure all connections are secure and follow the instructions carefully.
Safety Precautions:
Installation of safety elements like the hood pin is essential for security purposes. This module must be installed by a qualified technician to avoid any damage to the vehicle.
Frequently Asked Questions (FAQ)
- Q: Is the installation of the hood pin switch mandatory?
A: Yes, for proper functioning and safety, the installation of the hood pin switch is mandatory. - Q: Can the module be installed by anyone?
A: No, this module must be installed by a qualified technician to prevent any damage to the vehicle.
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
Vehicle functions supported in this diagram (functional if equipped)
NOTES
The vehicles OEM remote and SmartKey are still operable during remote start.
Parts required (Not included)
1X Diode
DESCRIPTION
ECU, Driver’s side
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
KEY BYPASS PROGRAMMING PROCEDURE 2/2
REMOTE STARTER FUNCTIONALITY |
Module labe
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Documents / Resources
 |
FORTIN 2020 EVO ALL Push Button Remote Starters and Alarm Systems [pdf] Installation Guide 2020, 2020 EVO ALL Push Button Remote Starters and Alarm Systems, EVO ALL Push Button Remote Starters and Alarm Systems, Push Button Remote Starters and Alarm Systems, Button Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, Starters and Alarm Systems, Alarm Systems, Systems |
