INTEGRATION
PLUG&PLAY IFP 207
User Manual
Please validate your Focal-JMlab warranty, it is now possible to register your product online: www.focal.com/warranty
Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product, we recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future.
Warning
Continuous listening at high sound level (above 110dB) can durably damage your hearing. Listening above 130dB can damage your hearing permanently.
Important recommendations
Before attempting any installation work, it is very important to check how much space is available to fit the speakers into the vehicle.
- Ensure the speaker is clean from debris and metallic particles that maybe attached (especially after drilling).
- Clean before mounting the speakers.
Due to constant technological advances, Focal reserves its right to modify specifications without notice. Images may not conform exactly to specific product..
IFP 207 installation
Installation 100% dedicated to Peugeot 207 in less than an hour (Peugeot ® is a trademark of PSA ® ).
Watch the demonstration video: www.focal.com/en/ifp207-video-install
There are some guidelines to follow when installing the IFP 207 kit in the Peugeot 307 and 308 cars (3/5 doors version and SW CC).
The steps of tweeter dismantling and door trims are the same as with a Peugeot 207… (3 Torx screws, staples at the bottom of the door, disconnection of the supply beam of the window lifter…).
IFP 207 installation in the Peugeot 307
Use the supplied tool to remove the handle.
Place the speaker in the door trim.
Remove the spikes that block the speaker positioning.
Fix the Focal speaker (use the original screws).
An acoustic insulation is needed to cancel the vibrations caused by the speaker fixing on the trim (ref. B.A.M.).
IFP 207 installation in the Peugeot 308
Use the supplied tool to remove the handle.
Use the same tool to dismantle the bar and the window lifter command.
Leave the original foam seal on the trim.
Cutting-out of rivets with a Ø 5,5/6mm metal drill.
Remove the spikes that block the speaker positioning.
For easier fitting: cut the lugs inside the speaker location.
Focal speaker riveting (aluminum 4x16mm rivet).
INTEGRATION IFP 207
Warning: We designed and developped the IFP 207 kit with a PEUGEOT France connection. This standard represents 90% of vehicles but however, in some countries, the choice of importers may be different and the PSA standard of our kit may not suit the connection of the vehicle.
Conditions of guarantee
All Focal loudspeakers are covered by warranty drawn up by the official Focal distributor in your country. Your distributor can provide all details concerning the conditions of warranty. Warranty cover extends at least to that granted by the legal warranty in force in the country where the original purchase invoice was issued.
Pour validation de la garantie Focal-JMlab, il est maintenant possible d’enregistrer son produit en ligne : www.focal.com/garantie
INTEGRATION IFP 207
Correct elimination of this product.
This marking indicates that within the EU this product should not be disposed of with other household wastes. To prevent any risk to the environment or human health, please recycle them responsibly to encourage the reuse of material resources. To return your used device, please use the return and collection systems available, or contact the retailer where you purchased the product. They can recycle this product safely.
Focal-JMlab® – BP 374 – 108, rue de l’Avenir – 42353 La Talaudière cedex – France – www.focal.com
Tel. (+33) 04 77 43 57 00 – Fax (+33) 04 77 43 57 04 – SCCG – 06/09/2021 – v4 – CODO1322
Documents / Resources
 |
FOCAL IFP 207 Integration Plug and Play System [pdf] User Manual IFP 207, Integration Plug and Play System |
