floor protector Easylogger App Version 3.8.1 for iOS and Android Instructions
General information about synchronization
What is a readout?
A readout is the retrieval of the measurement data recorded by the easy logger using the mobile app or the desktop application.
When can I read out?
To enable a successful readout, Bluetooth must be activated on your smartphone / tablet. Furthermore, the easy logger must be “woken up” with a magnet (minimum holding power 1kg) and must be within range. To ensure a lifetime of up to 6 years, an easy logger “sleeps” until it is woken up.
Login screen
Creation of a Floor protector user account
After you have clicked on “Create account”, you will be redirected to this screen.
In this screen you must enter your account details.
Now you see the privacy policy.
After you have accepted our privacy policy, you will be sent an e-mail. In this e-mail you will find a link to confirm your e-mail address.
After creating your account you will be forwarded to the main screen and can now read out your first easy logger.
Read out an easy logger
Main screen
If you click on the current easy logger, a list of all the easy loggers you have already read out will appear.
App settings
After you have clicked on the “Settings” button, you will be directed to the settings of the app.
Help section
Our support team will contact you in the following days.
Reset password
After you have clicked on “Forgot password”, this window appears.
If you have entered the correct e-mail address, this message appears.
After you have successfully entered your e-mail address, an e-mail will be sent to you.
After successfully changing your password, you can log back into our app with your new password.
Certificates
FCC
FCC ID: 2ADQTV1EL
User Information gem. FCC 15.21:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Part 15 Statement gem. FCC 15.19:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation.
IC
IC ID : 12568A-V1EL
Statement gem.RSS GEN Issue 5:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure separation distance of easy logger: 20.0cm
Customer Support
Waldgasse 2 A-2700 Wiener Neustadt
Phone: +43-(0)2774 – 29 701
fax: +43-(0)2774 – 29 701 -19
office@floorprotector.at
www.floorprotector.at
Documents / Resources
 |
floor protector Easylogger App Version 3.8.1 for iOS and Android [pdf] Instructions V1EL, 2ADQTV1EL, Easylogger App Version 3.8.1 for iOS and Android |
