fifine T669 USB Microphone Computer PC Microphone Kit
SPECIFICATION
WHAT’S IN THE BOX
GUIDELINE FOR USE
- Install the C-clamp and boom arm stand on a desk. Screw the shock mount to the arm stand, and until they are firmly connected.
- Install the Mic-Place the mic through the hold, then tighten the metal ring on the bottom of the shock mount.
Tips: The side with a red warning sticker should be up.
- Record in front of the microphone (the side of the mic with the logo).
Adjust the mic volume via the volume knob.
- Connect the microphone to the computer via the included USB cable.
COMPUTER SET-UP (MAC OS & WINDOWS)
- APPLE MAC OS
- Input Settings
Output Settings
- Output the audio from internal speakers
- Output the audio from headphones
WINDOWS
Input Settings
Output Settings
Output the audio from the built-in speaker
Output the audio from headphones
Tips:
- “Speaker Properties”-“Level”-Make sure to turn on the “speaker icon” under “Microphone9 before monitoring the mic.
- Select “USB PnP Audio Device” as the input device from the settings when using recording software.
- Make sure to click off “Listen to this Device” in your computer system when you are using any recording software, or else you will hear a duet of yourself, just like too much echo.
Documents / Resources
 |
fifine T669 USB Microphone Computer PC Microphone Kit [pdf] User Guide T669, T669 USB Microphone Computer PC Microphone Kit, T669, USB Microphone Computer PC Microphone Kit, Microphone Computer PC Microphone Kit, Computer PC Microphone Kit, PC Microphone Kit, Microphone Kit |