1. Johdanto
The Philips SFL3183RH LED Headlamp is a versatile and durable lighting solution designed for various outdoor and indoor activities. Featuring a powerful 200-lumen LED, multiple lighting modes, and a rechargeable battery, this headlamp provides reliable illumination for hiking, camping, running, repairing, fishing, and cycling. Its waterproof design and intelligent sensor function enhance usability and convenience.
2. Pakkauksen sisältö
Varmista, että pakkauksessa on kaikki tarvittavat osat:
- Ladattava LED-pääamp x 1
- Hattuklipsi x 1
- USB-latauskaapeli (tyyppi C) x 1
- Säädettävä valonauha (pääpanta) x 1
3. Tuotteen ominaisuudet
- 6 valaistustilaa: Includes low, medium, high, SOS flash, red light, and red/blue flashing light modes for diverse needs.
- Zoomaustoiminto: Easily switch between spotlight and floodlight modes by rotating the headlamp.
- Tehokas LED: 200 lumens LED bulb illuminates up to 200 meters.
- Ladattava akku: Built-in 1200 mAh lithium battery, rechargeable via USB-C. Provides up to 9 hours of light in medium brightness mode.
- Säädettävä muotoilu: Headlamp rotates 140° for angle adjustment. Comes with an adjustable non-slip elastic headband and a hat clip.
- Kevyt ja kestävä: Weighs only 75 grams, made from ABS material, drop-proof, and waterproof.
- Intelligent Sensor Function: Control the light switch with a hand wave, ideal for situations where hands are wet or dirty.
- Älykäs akun muistutus: Green light (above 30%), red light (30%-10%), flashing red light (below 10%).
4. Asennus
4.1 Pääpannan kiinnittäminen
The adjustable elastic headband is pre-attached. To adjust the fit, slide the buckles on the strap until it comfortably fits around your head or helmet. Ensure it is snug but not too tight.
4.2 Using the Hat Clip
For alternative wear, attach the headlamp to the brim of a hat using the included hat clip. This allows for hands-free operation without obstructing your view.
Pääamp can be attached to a hat brim using the included clip and offers 140-degree rotation.
5. Käyttöohjeet
5.1 Virta päälle/pois ja tilan valinta
Paina virtapainiketta kerran kytkeäksesi päälaitteen päälle.amp. Subsequent presses will cycle through the white light modes: Low → Medium → High. Double-click the power button to activate the SOS flash mode. Hold down the power button to turn on the red auxiliary light. Double-click again to switch to the red and blue flashing mode.
Control buttons and various light modes including white, red, red/blue, and SOS flash.
5.2 Zoomaustoiminto
To adjust the beam focus, rotate the head of the lamp:
- Rotate counterclockwise for a focused valokeilassa palkki.
- Rotate clockwise for a wide valonheitin palkki.
Illustration of spotlight for focused illumination and floodlight for wide area coverage.
5.3 Intelligent Sensor Function
Pääamp features an infrared sensor for hands-free operation. Press the dedicated sensor button to activate this function. Once activated, you can turn the light on or off by waving your hand approximately 20 cm in front of the sensor. Press the sensor button again to deactivate the sensor function.
Activate the intelligent infrared sensor to control the light with a simple hand wave.
6. Lataus ja akku
6.1 Päälaitteen lataaminenamp
Connect the included USB-C charging cable to the headlamp's charging port and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, computer USB port). A full charge takes approximately 3 hours.
Pääamp charges via USB-C, requiring approximately 3 hours for a full charge.
6.2 Akun merkkivalo
Pääamp features an intelligent battery reminder system:
- Vihreä valo: Akun varaustaso on yli 30 %.
- Punainen valo: Akun varaustaso on 30–10 %.
- Vilkkuva punainen valo: Akun varaustaso on alle 10 %.
Battery indicator lights show remaining power: green (above 30%), red (10-30%), flashing red (below 10%).
6.3 Latauksen varotoimet
Charge the product promptly when the battery is low. Avoid fully depleting the battery before recharging, as this can shorten the product's lifespan and affect performance.
7. Huolto
7.1 Puhdistus
Pyyhi pääamp pehmeällä, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the surface or internal components. Ensure the charging port cover is securely closed before cleaning or exposing to water.
7.2 Varastointi
Säilytä pääamp in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery periodically to maintain its health.
7.3 Vedenkestävyys
Pääamp is waterproof. However, avoid prolonged submersion or exposure to high-pressure water jets to prevent potential damage.
Pääamp is designed to be waterproof, suitable for use in various weather conditions.
8. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Headlamp ei käynnisty. | Akku on tyhjä. | Lataa pääamp USB-C-kaapelin avulla. |
| Valaistustilat eivät muutu. | Väärä painikkeiden painallusjärjestys. | Refer to Section 5.1 for correct power and mode selection instructions. |
| Sensor function is not working or activates unintentionally. | Sensor is not activated or is obstructed. | Ensure the sensor function is activated (Section 5.3). Keep the sensor area clear. If it activates unintentionally, deactivate the sensor function. |
| Akku ei lataudu. | Viallinen kaapeli tai virtalähde. | Kokeile toista USB-C-kaapelia tai virtalähdettä. Varmista, että kaapeli on työnnetty kokonaan paikalleen. |
9. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallinumero | SFL3183 |
| Valoteho (maksimi) | 200 lumenia |
| Valon polun etäisyys | 200 metriä |
| Akun tyyppi | 1200 mAh litiumpolymeeri |
| Latausaika | Noin 3 tuntia |
| Runtime (Medium Brightness) | Jopa 9 tuntia |
| Vedenkestävyystaso | Vedenpitävä |
| Materiaali | ABS, Polyvinyl Chloride (PVC) |
| Paino | 3.2 unssia (75 grammaa) |
| Mitat (P x L x K) | 3.62 cm x 1.96 cm x 4.72 cm |
| Erikoisominaisuudet | Adjustable Focus, 6 Modes, Zoom, Sensor Function |
10. Takuu ja tuki
10.1 Valmistajan takuu
This Philips SFL3183RH LED Headlamp comes with a 2-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
10.2 Asiakastuki
For technical assistance, troubleshooting, or warranty inquiries, please contact Philips customer support through their official website or the retailer where the product was purchased. Please have your model number (SFL3183) and purchase date available when contacting support.