SLV 1007608
SLV Cyft LED Ceiling Light - Model 1007608 User Manual
This manual provides essential instructions for the safe installation, operation, and maintenance of your SLV Cyft LED Ceiling Light.
1. Tärkeitä turvallisuusohjeita
Lue nämä ohjeet huolellisesti ennen asennusta ja käyttöä. Säilytä tämä käyttöohje myöhempää tarvetta varten.
- Sähköturvallisuus: Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the fixture. Consult a qualified electrician if you are unsure about wiring procedures.
- Asennus: Ensure the mounting surface can support the weight of the fixture. Do not install near heat sources or in excessively damp environments unless specified.
- Käsittely: Handle the fixture with care to avoid damage. Do not touch the LED light source directly when the fixture is in operation or immediately after, as it may be hot.
- Puhdistus: Käytä puhdistukseen pehmeää, kuivaa liinaa. Älä käytä hankaavia puhdistusaineita tai liuottimia.
2. Pakkauksen sisältö
Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista.
- SLV Cyft LED Ceiling Light Fixture
- Kiinnitystarvikkeet (ruuvit, ankkurit)
- Käyttöohje
3. Asennus ja asennus
This section outlines the steps for installing your SLV Cyft LED Ceiling Light. Professional installation is recommended.
3.1 Esiasennus
- Sammuta virta: Locate the main circuit breaker and turn off the power supply to the installation area. Verify power is off using a voltage testaaja.
- Pura pakkauksesta: Carefully remove the fixture and all components from the packaging. Inspect for any damage.
3.2 Valaisimen asennus
- Kiinnitä asennusteline: Kiinnitä kiinnitysteline kattoon kiinnitettävään liitäntärasiaan mukana toimitetuilla ruuveilla. Varmista, että se on tukevasti kiinni.
- Johdotus: Connect the electrical wires from the ceiling to the fixture's wires according to local electrical codes. Typically, connect live (black/brown) to live, neutral (white/blue) to neutral, and ground (green/yellow) to ground. Use appropriate wire connectors.
- Turvallinen kiinnitys: Carefully align the fixture with the mounting bracket and secure it using the provided screws or locking mechanism. Ensure no wires are pinched.

Image 1: SLV Cyft LED Ceiling Light, Model 1007608, mounted on a ceiling. This image illustrates the product's appearance and how it integrates into a room.
4. Käyttöohjeet
Once installed, operating the SLV Cyft LED Ceiling Light is straightforward.
- Palauta virta: Return to the main circuit breaker and turn the power supply back on.
- Kytke päälle: Use the wall switch connected to the fixture to turn the light on.
- säädettävyys: If your model features adjustable light output or direction, refer to any specific controls on the fixture or associated wall switch for adjustment. (Note: The product description mentions "Couleur: Réglable" which may imply adjustable light color or brightness, or physical adjustability of the fixture itself. Consult product packaging for specific features.)
5. Huolto
Säännöllinen huolto varmistaa valaisimen pitkän käyttöiän ja optimaalisen suorituskyvyn.
- Puhdistus: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, lint-free cloth. Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish.
- LED-valonlähde: The LED light source in this fixture is designed for long life and is generally not user-replaceable. Do not attempt to disassemble the LED module.
- Tarkastus: Periodically check for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.
6. Vianmääritys
If you encounter issues with your SLV Cyft LED Ceiling Light, refer to the following common problems and solutions.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty. | Ei virtaa; löysä johdotus; viallinen kytkin. | Check circuit breaker. Verify wiring connections. Test wall switch. |
| Valo välkkyy. | Loose wiring connection; incompatible dimmer switch (if applicable). | Ensure all wiring connections are secure. If using a dimmer, ensure it is LED-compatible. |
| Valo on hämärää. | Dimmer setting too low; dust accumulation. | Adjust dimmer to a higher setting. Clean the fixture. |
If the problem persists after attempting these solutions, contact a qualified electrician or SLV customer support.
7. Tekniset tiedot
| Merkki | SLV |
| Mallinumero | 1007608 |
| Mitat (P x L x K) | 13.2 x 7.9 x 13.2 cm |
| Paino | 946 grammaa |
| Materiaali | Metalli |
| Tyyli | Moderni |
| Väri | Adjustable (Refers to fixture's aesthetic or light output characteristics) |
| Valonlähteen tyyppi | LED |
| Virtalähde | Johdollinen sähkö |
| Asennustyyppi | Kattoon kiinnitys |
| Erityiset käyttötarkoitukset | Kotiin |
| Sisä-/ulkokäyttö | Outdoor (Note: Product categories suggest interior, but spec says 'Extérieure'. I will include both and add a note for clarification.) |
Note: While some specifications indicate 'Outdoor Use', the product categories suggest 'Interior Lighting'. Please refer to product packaging or manufacturer's official documentation for definitive usage environment.
8. Takuu ja tuki
Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact SLV directly or refer to the warranty card included with your purchase.
Löydät yleensä yhteystiedot valmistajan viralliselta verkkosivulta. websivusto: www.slv.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.