1. Johdanto
The Nerf N Series Infinite Dart Blaster is designed for foam dart play, offering extreme accuracy, speed, and distance. This manual provides instructions for safe assembly, operation, and care of your blaster.
Figure 1: Nerf N Series Infinite Dart Blaster with included N1 darts.
2. Turvallisuustiedot
WARNING: Small parts may be generated. Not for children under 3 years.
Always use official Nerf N Series N1 darts. Do not modify darts or blaster. Eyewear is recommended for players and people within range (not included).
3. Mitä laatikossa on
- Nerf N Series Infinite Dart Blaster
- 40-Dart Battle Belt (pre-installed or separate)
- 80 Nerf N1 Foam Darts
Figure 2: Contents of the Nerf N Series Infinite Dart Blaster package.
4. Asennus
Ensure all components are present and undamaged before beginning assembly or play.
4.1 Attaching the Battle Belt
The 40-dart battle belt is designed for quick loading and can be removed. If not already attached, slide the battle belt into the designated slot on the underside of the blaster until it clicks securely into place.
Figure 3: Inserting the 40-dart battle belt into the blaster.
5. Tikanheittojen lataaminen
The Nerf N Series Infinite Blaster uses specific Nerf N1 darts for optimal performance.
5.1 Loading the 40-Dart Battle Belt
- Ensure the battle belt is either attached to the blaster or removed.
- Insert Nerf N1 darts individually into the slots on the battle belt. The belt is designed to allow continuous loading during play.
- The blaster also features onboard 16-dart storage for additional darts, keeping them within easy reach for reloads.
Figure 4: Loading N1 darts into the battle belt.
6. Blasterin käyttö
The Nerf N Series Infinite Blaster features pump-action firing.
- Blasterin virittäminen: Grip the priming slide located at the front of the blaster. Pull the slide back completely, then push it forward until it locks into place. This action prepares a dart for firing.
- Fire a Dart: Aim the blaster at your target. Pull the trigger to fire a single Nerf N1 dart.
- Repeat steps 1 and 2 to fire additional darts. The battle belt will advance automatically.
Figure 5: Priming the blaster for firing.
Figure 6: Blaster in action, firing an N1 dart.
7. Dart Compatibility
The Nerf N Series Infinite Blaster is compatible vain with Nerf N Series N1 darts. Using other types of darts may cause the blaster to malfunction or jam.
8. Huolto
To ensure the longevity and optimal performance of your Nerf N Series Infinite Dart Blaster:
- Keep the blaster clean and free of dirt or debris.
- Store the blaster and darts in a dry, cool place away from direct sunlight.
- Do not attempt to disassemble the blaster beyond its intended removable parts.
9. Vianmääritys
9.1 Darts Not Firing or Jamming
- Ensure you are using only official Nerf N Series N1 darts. Other darts are not compatible.
- Verify that the blaster is fully primed by pulling the slide back and pushing it forward completely.
- Check the battle belt for any misaligned or damaged darts. Remove and replace any problematic darts.
- If a dart is jammed, carefully remove the battle belt and clear the jam from the dart path.
10. Tekniset tiedot
- Mallinumero: F8631 XNUMX
- Tuotteen mitat: 3.19 x 26 x 13.5 tuumaa
- Tuotteen paino: 4.84 kiloa
- Valmistajan suosittelema ikä: 8 vuotta ja ylöspäin
- Dart Type: Nerf N Series N1 Darts (80 included)
- Battle Belt Capacity: 40 tikkaa
- Sisäinen tallennustila: 16 tikkaa
11. Virallinen tuotevideo
Video 1: Virallinen ottelu päättyiview of the Nerf N Series Infinite Blaster, demonstrating its pump-action and battle belt features.
12. Takuu ja tuki
Takuutietoja tai tuotetukea varten katso valmistajan virallinen websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.
