FiiO KA11 USB-C - 3.5 mm:n äänisovitin, käyttöohje

1. Johdanto

The FiiO KA11 is a compact and powerful USB C to 3.5mm audio adapter designed to enhance your audio experience across various devices. It integrates a high-performance Digital-to-Analog Converter (DAC) and a headphone amplifier to deliver high-fidelity sound. This manual provides essential information for setting up, operating, and maintaining your FiiO KA11.

Image: The FiiO KA11 USB C to 3.5mm Audio Adapter, showcasinsen kompakti muotoilu ja liittimet.

2. Tärkeimmät ominaisuudet

• High-Fidelity Audio Performance: Equipped with a Hi-Res DAC chip (CS43131) for excellent and stable decoding. Supports a maximum sampling rate of 32bit/384KHz.
• Voimakas Amplifikaatio: Delivers up to 245mW at 16Ω load and 200mW at 32Ω load, sufficient to drive most headphones.
• Kompakti ja kannettava muotoilu: With dimensions of 44x9.7x10.5mm and a weight of approximately 8.5g, it is convenient for on-the-go use.
• Edistynyt piiritekniikka: Features high-standard circuit components and a multi-layer immersion gold circuit board for strong decoding ability and detailed sound control. Achieves THD+N: <0.0006%, SNR: 125dB, Noise: <1.7uV.
• Laaja yhteensopivuus: Connects via USB Type-C or Lightning connector to Android/iOS phones and tablets, as well as Windows and Mac computers.
• UAC1.0-tuki: Offers UAC1.0 mode for plug-and-play compatibility with devices like Nintendo Switch and PS5, providing a low-latency gaming experience with rich sound effects. (Note: UAC1.0 mode requires switching via the FiiO Control app).

Image: Diagram illustrating the power output capabilities of the FiiO KA11 at different impedance levels.

Image: Detailed block diagram of the FiiO KA11's specially designed HiFi audio circuit, highlighting the DAC and op-amp komponentit.

Image: Visual representation of the FiiO KA11's audio performance metrics, including THD+N, SNR, and Noise levels, along with supported audio formats.

Kuva: Poikkileikkaus view of the FiiO KA11's cable, illustrating its high-purity oxygen-free palladium-plated copper wires and flexible silicone/braided cloth exterior.

3. Asennusopas

1. Yhdistä lähdelaitteeseen: Plug the USB Type-C or Lightning connector of the FiiO KA11 into the corresponding port on your smartphone, tablet, or computer.
2. Kuulokkeiden liittäminen: Insert your 3.5mm headphones or earphones into the 3.5mm audio jack of the FiiO KA11.
3. Automaattinen tunnistus: Most devices will automatically recognize the FiiO KA11 as an external audio output device. No additional drivers are typically required for standard operation (UAC2.0 mode).
4. Säädä äänenvoimakkuutta: Control the audio volume directly from your connected source device.

Image: The FiiO KA11 connected to various devices, illustrating its compatibility with Android, iOS, Windows, and Mac operating systems.

4. Käyttöohjeet

4.1 Standard Audio Playback

Once connected, the FiiO KA11 will function as your device's primary audio output. Simply play your desired audio content (music, videos, games) from your source device, and the sound will be routed through the KA11 to your connected headphones.

4.2 UAC1.0-tila pelikonsoleille

For devices like Nintendo Switch and PS5, the FiiO KA11 supports UAC1.0 mode, enabling plug-and-play functionality and low-latency audio. To activate UAC1.0 mode:

1. Lataa ja asenna FiiO Control -sovellus Android-laitteella.
2. Connect the FiiO KA11 to the Android device.
3. Open the FiiO Control app and navigate to the settings for the KA11.
4. Switch the USB Audio Class (UAC) mode from UAC2.0 to UAC1.0.
5. Once switched, the KA11 can be connected to your gaming console for an immersive audio experience.

Note: The FiiO Control app is currently only supported on Android devices for changing UAC modes and other settings.

Image: The FiiO KA11 connected to a Nintendo Switch, demonstrating its UAC1.0 compatibility for an enhanced gaming audio experience.

Image: Screenshot of the FiiO Control app interface, showing options for adjusting settings like RGB lighting and digital filters for the KA11.

5. Huolto

• Puhdistus: Use a soft, dry cloth to wipe the exterior of the FiiO KA11. Avoid using liquid cleaners or solvents.
• Varastointi: Säilytä sovitinta viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista.
• Käsittely: Avoid bending or twisting the cable excessively, and always pull from the connector housing when unplugging to prevent damage.
• Lämpö: It is normal for the device to warm up during extended use, especially when driving high-impedance headphones. Ensure adequate ventilation and avoid covering the device.

Image: Infographic detailing various quality assurance tests performed on the FiiO KA11, including plug/unplug cycles, salt spray, lifting, swing, crush, and extreme temperature tests.

6. Vianmääritys

• Ei äänilähtöä:
  • Varmista, että FiiO KA11 on kytketty kunnolla sekä lähdelaitteeseen että kuulokkeisiin.
  • Check the volume levels on your source device.
  • Verify that the FiiO KA11 is selected as the audio output device in your device's sound settings.
  • Testaa eri kuulokkeilla tai eri lähdelaitteella ongelman löytämiseksi.
• Laitetta ei havaittu:
  • Try reconnecting the KA11.
  • Käynnistä lähdelaitteesi uudelleen.
  • If using UAC1.0 mode, ensure it was correctly switched using the FiiO Control app on an Android device. If the device is not detected after switching to UAC1.0, try connecting it to a compatible UAC1.0 device (like a gaming console) or an Android device to switch back to UAC2.0 if needed.
• Vääristynyt tai heikkolaatuinen ääni:
  • Varmista äänentoistosi files are of good quality.
  • Tarkista löysät liitännät.
  • Reduce the volume on your source device if distortion occurs at high levels.
  • Avoid using the adapter in environments with strong electromagnetic interference.
• Laite lämpenee:

  It is normal for the FiiO KA11 to become warm during operation, especially when driving demanding headphones or during prolonged use. This is due to the power amplification and DAC processing. If it becomes excessively hot or stops functioning, disconnect it immediately and contact support.

7. Tekniset tiedot

8. Takuu ja tuki

FiiO products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official FiiO website. For technical support, product inquiries, or service, please contact FiiO customer service through their official channels.

Lisätietoja ja tukiresursseja löydät osoitteesta FiiO-kauppa Amazonissa.