1. Tärkeitä turvallisuusohjeita
Read and understand all safety warnings and instructions before operating this electric hoist. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage. Keep this manual for future reference.
1.1 Yleinen turvallisuus
- Käytä aina asianmukaisia henkilönsuojaimia, kuten suojalaseja, käsineitä ja tukevia jalkineita.
- Ensure the work area is clear of obstructions, well-lit, and free from unauthorized personnel.
- Älä käytä nostinta huumeiden, alkoholin tai lääkkeiden vaikutuksen alaisena.
- Inspect the hoist for damage before each use. Do not operate if damaged.
- Keep hands and body clear of moving parts and the load during operation.
1.2 Sähköturvallisuus
- Connect the hoist only to a properly grounded power outlet with the specified voltage (220 V).
- Do not expose the hoist to rain or wet conditions.
- Älä koskaan käytä virtajohtoa nostimen kantamiseen, vetämiseen tai irrottamiseen pistorasiasta.
- Varmista, että kaikki sähköliitännät ovat tukevasti kiinni ja vahingoittumattomia.
1.3 Nostoturvallisuus
- Never exceed the rated load capacity of the hoist (125 kg for single cable, 250 kg for double cable).
- Ensure the load is properly balanced and securely attached to the hook.
- Do not lift people or objects over people.
- Vältä äkillisiä liikkeellelähtöjä tai pysähdyksiä kuormaa nostettaessa tai laskettaessa.
- Use the emergency stop switch immediately if an unsafe condition occurs.
2. Tuote ohiview
The VEVOR Electric Wire Rope Hoist PAYX250-2 is designed for lifting heavy objects in various environments such as garages, warehouses, and factories. It features a robust pure copper motor, a durable steel wire rope, and a wired remote control for safe operation.
Kuva 2.1: Pää view of the VEVOR Electric Wire Rope Hoist, highlighting its compact design and robust construction.
Figure 2.2: The electric hoist installed in a typical garage environment, demonstrating its application for lifting tasks.
2.1 Tärkeimmät osat
- Moottori: Pure copper motor with a cooling fan for efficient and prolonged operation.
- Vaijeri: Durable braided steel cable (Φ 3 mm * L 12 m, 19 strands).
- Koukku: Alloy steel hook for secure load attachment. Includes a double hook for increased capacity.
- Kaukosäädin: Wired remote with a 4m cable for safe operation from a distance, featuring an emergency stop button.
- Asennustelineet: Two channel mounting brackets for easy installation.
- Turvaominaisuudet: Emergency stop switch and electromagnetic braking system to prevent accidental slippage and overturning.
3. Asennus
Proper installation is crucial for safe and effective operation of the hoist.
3.1 Nostimen asennus
- Select a sturdy overhead beam or crossbar capable of supporting the hoist's weight and the maximum intended load.
- Attach the two provided channel mounting brackets to the hoist.
- Securely mount the hoist to the chosen overhead structure using appropriate fasteners. Ensure the brackets are tightly fastened to prevent movement during operation.
Figure 3.1: Illustration of the metal adjustable fixing rings (mounting brackets) and their dimensions for secure installation.
3.2 Sähköliitäntä
- Ensure the power supply matches the hoist's voltage-vaatimus (220 V).
- Plug the hoist into a grounded electrical outlet. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the hoist's power requirements.
3.3 Cable Configuration (Single vs. Double Line)
The hoist can be configured for single or double line lifting, affecting its capacity and lifting speed.
- Single Cable: Provides higher lifting height and speed (40 ft/12 m, 33 ft/min) with a capacity of 125 kg.
- Double Cable: Achieved by using the provided pulley hook, which doubles the lifting capacity to 250 kg but halves the lifting height and speed (19.7 ft/6 m, 16 ft/min).
Figure 3.2: Comparison of single cable setup (left) for higher speed and height, and double cable setup (right) using a pulley hook for increased lifting capacity.
4. Käyttöohjeet
Follow these steps for safe and effective operation of your electric hoist.
4.1 Kaukosäätimen käyttö
The hoist is operated via a wired remote control, allowing you to maintain a safe distance from the load.
Figure 4.1: The multi-functional remote control handle with its 14ft (approx. 4m) cable, featuring an emergency stop button.
- Yläpainike: Nosta kuorma pitämällä pohjassa.
- Alas-painike: Paina ja pidä pohjassa laskeaksesi kuormaa.
- Hätäpysäytyspainike: Press the large red button to immediately stop all hoist operations in an emergency. Twist to reset.
- Always operate the hoist from a position where you have a clear view of the load and the surrounding area.
4.2 Lifting Procedures
- Before lifting, ensure the load is within the hoist's capacity and is securely attached to the hook.
- Slowly lift the load a few inches off the ground to check for balance and stability.
- If the load is stable, proceed to lift it to the desired height. Avoid swinging the load.
- When lowering, do so slowly and steadily. Guide the load if necessary, keeping hands clear.
- Älä koskaan jätä riippuvaa kuormaa ilman valvontaa.
5. Huolto
Säännöllinen huolto varmistaa nostolaitteesi pitkän käyttöiän ja turvallisen toiminnan.
5.1 Säännöllinen tarkastus
- Vaijeri: Inspect the wire rope for kinks, fraying, corrosion, or broken strands before each use. Replace if any damage is observed.
- Koukku: Check the hook for deformation, cracks, or excessive wear. Ensure the safety latch operates correctly.
- Moottori ja kotelo: Inspect for any visible damage, loose fasteners, or unusual noises during operation.
- Electrical Cable and Remote: Check for cuts, abrasions, or damage to the power cord and remote control cable.
5.2 Puhdistus ja varastointi
- Keep the hoist clean and free from dirt, dust, and debris. Use a dry cloth to wipe down surfaces.
- Store the hoist in a dry, clean, and secure location away from moisture and extreme temperatures.
6. Vianmääritys
Katso tästä osiosta yleisiä ongelmia ja niiden mahdollisia ratkaisuja.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Nostin ei toimi | Ei virtalähdettä Hätäpysäytys kytkettynä Moottorin ylikuormitussuoja aktivoitu | Tarkista virtaliitäntä ja pistorasia Vapauta hätäpysäytyspainike Allow motor to cool down, reduce load |
| Epätavallinen ääni käytön aikana | Irralliset komponentit Voitelun puute Sisäinen vaurio | Inspect for loose parts and tighten Käänny pätevän teknikon puoleen Discontinue use and seek professional service |
| Load slips or drops | Jarrujen toimintahäiriö Ylikuormitus | Discontinue use immediately and contact service Ensure load is within capacity |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, contact VEVOR customer support.
7. Tekniset tiedot
Technical data for the VEVOR Electric Wire Rope Hoist PAYX250-2.
Figure 7.1: Detailed product dimensions and a summary of key specifications.
| Parametri | Arvo |
|---|---|
| Mallinumero | PAYX250-2 |
| Lifting Load Capacity (Single Cable) | 125 kg (275 lb) |
| Lifting Load Capacity (Double Cable) | 250 kg (550 lb) |
| Lifting Height (Single Cable) | 12 m (40 jalkaa) |
| Lifting Height (Double Cable) | 6 m (19.7 jalkaa) |
| Lifting Speed (Single Cable) | 10 m/min (33 ft/min) |
| Lifting Speed (Double Cable) | 5 m/min (16 ft/min) |
| Moottorin teho | 510 W |
| Voitage | 220 V |
| Kaapelin koko | Φ 3 mm * L 12 m (19 strands) |
| Tuotteen mitat (P x L x K) | 350 x 135 x 160 mm (13.8 x 5.3 x 6.3 tuumaa) |
| Tuotteen paino | 10.35 kg (22.82 lb) |
| Ohjaustila | Langallinen kaukosäädin |
| Nimellinen pyörimisnopeus | 2800 rpm |
| Nimellisvääntömomentti | 1.1 Nm |
Figure 7.2: Diagram illustrating the internal motor components and the cooling fan designed for heat dissipation.
8. Takuu ja tuki
VEVOR-tuotteet on suunniteltu kestäviksi ja tehokkaiksi. Takuutietoja, teknistä tukea tai huoltoa koskevia tiedusteluja varten katso tuotteen mukana toimitettu takuukortti tai käy VEVORin virallisella verkkosivustolla. websivusto. Säilytä ostokuitti ostotodistuksena.
