ZTE WF723 Langattoman Kotipuhelimen Tukikohdan Käyttöohje

Johdanto

This manual provides essential instructions for the setup, operation, and maintenance of your ZTE WF723 Wireless Home Phone Base. The WF723 is a VoLTE voice-only device designed to provide reliable home phone service using a cellular network, featuring a backup battery for extended talk time.

Please read this manual thoroughly before using the device to ensure proper functionality and to avoid any operational issues.

Laite ohiview

The ZTE WF723 Wireless Home Phone Base is a compact unit with various indicators and ports for connectivity. Familiarize yourself with the device's components.

Kuva: Edessä view of the ZTE WF723 Wireless Home Phone Base, showing the ZTE logo and LED indicators for power, information, signal strength, and battery status.

Kuva: Takaosa view of the ZTE WF723 Wireless Home Phone Base, displaying the two RJ11 phone ports, power input, and external antenna connectors.

LED-ilmaisimet

The device features several LED indicators to provide status information. Refer to the "LED Indicators" section for detailed explanations.

• Virran ilmaisin: Näyttää laitteen virtatilan.
• Information Indicator: Provides general status updates.
• Voicemail Indicator: Lights up when new voicemail messages are available.
• Pariston ilmaisin: Displays the battery charge level and status.
• Signaalin voimakkuuden ilmaisin: Shows the strength of the cellular network signal.

Asennus

Follow these steps to set up your ZTE WF723 Wireless Home Phone Base.

1. Installing Your Nano-SIM Card

1. Slide the back cover and remove it.
2. Pidä nano-SIM-korttia metalliset koskettimet alaspäin ja työnnä se nano-SIM-korttipaikkaan.

Kuva: Diagram illustrating the process of removing the back cover and inserting a nano-SIM card into the designated slot on the ZTE WF723.

2. Lataa akku

1. Connect the power adapter to the power socket on the device.
2. Liitä laturi tavalliseen vaihtovirtapistorasiaan.
3. The battery is for backup power only. The charger should always be connected for primary operation.

3. Connect the Device to a Phone

1. Plug your phone into the PUHELIN 1 XNUMX XNUMX port on the device through a phone cable.
2. The PUHELIN 2 XNUMX XNUMX port can be used to connect an additional phone or a cordless base station. All telephones connected to the device will use the same phone number.

Käyttöohjeet

Soittaminen

1. Nosta liitetyn kotipuhelimen luuri.
2. Soita puhelinnumero.
3. Wait 4-8 seconds for the call to be connected automatically.

Puhelun vastaanottaminen

When an incoming call is received, your connected phone will ring. Simply pick up the handset to answer the call.

Puhelimen ominaisuudet

The ZTE WF723 supports standard telephone features:

• Vastaaja: Access your voicemail messages as provided by your service provider.
• Three-way Calling: Conduct conference calls with two other parties.
• Odottava puhelu: Receive notification of an incoming call while already on a call.
• Soitonsiirto: Redirect incoming calls to another phone number.

Note: Availability and activation of these features depend on your service provider.

LED-ilmaisimet

The following table explains the status indicated by the device's LED lights.

Note: After inserting the SIM card and powering on the device, the network signal may take 3-5 minutes to register.

Huolto

• Säilytä laitetta kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista.
• Puhdista laite pehmeällä, kuivalla liinalla. Älä käytä nestemäisiä puhdistusaineita tai aerosoleja.
• Varmista laitteen ympärillä asianmukainen tuuletus ylikuumenemisen estämiseksi.
• Vältä laitteen pudottamista tai altistamista voimakkaille iskuille.

Vianetsintä

If you encounter issues with your ZTE WF723, refer to the following common problems and solutions:

No Dial Tone or Cannot Make Calls

• Tarkista SIM-kortti: Ensure the nano-SIM card is correctly inserted. The Network Signal LED should not be red blinking.
• Check Network Signal: Verify the Network Signal LED is green or orange solid. If it's red solid, the device is searching for service. Move the device to an area with better signal reception.
• Puhelinyhteys: Ensure your corded or cordless phone is properly connected to the PHONE 1 or PHONE 2 port.
• Virtalähde: Confirm the device is powered on and connected to the AC adapter.
• Palveluntarjoaja: Contact your service provider to ensure your SIM card is activated and your account is in good standing.

Battery Not Charging or Low Battery Life

• Virtalähde: Ensure you are using the original or a compatible power adapter.
• Yhteys: Check that the power adapter is securely connected to both the device and the power outlet.
• Akun kunto: If the device is renewed, the battery may have reduced capacity. The battery is primarily for backup.

LED Indicators Not Functioning as Expected

• Refer to the "LED Indicators" section for a detailed explanation of each light's meaning.
• If an indicator shows an error (e.g., red blinking for SIM card), address the underlying issue.

Tekniset tiedot

Kuva: Close-up of the bottom label of the ZTE WF723, displaying the model number (WF723), FCC ID, IC, H/W version, IMEI, and Serial Number (S/N).

Takuu ja tuki

This ZTE WF723 Wireless Home Phone Base is an Amazon Renewed product and comes with a 90-day Amazon Renewed limited Warranty.

For technical support or warranty claims, please refer to the Amazon Renewed program guidelines or contact the seller directly.

For general inquiries about ZTE products, you may visit the official ZTE websivustolla tai ota yhteyttä heidän asiakaspalveluunsa.