DIGITUS DN-45004

Digitus DN-45004 Mobile Desktop Charging Cabinet User Manual

Model: DN-45004 | 10 USB-C Ports with UV Lamp

1. Johdanto

The DIGITUS DN-45004 Mobile Desktop Charging Cabinet is designed for storing and charging portable devices such as tablets and smartphones. It features 10 USB-C charging ports and an integrated UV-C lamp for enhanced hygiene. This cabinet is suitable for public institutions like schools, providing a centralized and secure location for device management and charging.

2. Turvallisuusvaroitukset

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

4. Asennus

  1. Purkaminen: Carefully remove the charging cabinet from its packaging.
  2. Sijoitus: Place the cabinet on a flat, stable, and dry surface. Ensure adequate ventilation around the unit. The anti-slip feet provide stability.
  3. Virtaliitäntä: Connect the provided power cable to the C19 input on the rear of the cabinet and then to a suitable electrical outlet (110/220 VAC, 50/60 Hz).
  4. Alustava virrantarkistus: If the unit does not power on, check the internal circuit breaker located behind the rear panel. This breaker may trip during transport. To access, unscrew the four screws on the rear panel, remove it, and reset the blue lever on the circuit breaker to the 'On' position.
Sisäinen view of the Digitus DN-45004 charging cabinet showing the circuit breaker and internal wiring.
Kuva 4.1: Sisäinen view showing the circuit breaker. If the unit does not power on, check this component.

5. Käyttöohjeet

5.1 Latauslaitteet

  1. Avaa ovi: Use the provided keys to unlock and open the front door of the cabinet.
  2. Laita laitteet: Place your tablets or smartphones into the designated slots. Note that this cabinet is primarily designed for tablets and smartphones; larger laptops may not fit.
  3. Connect to USB-C Ports: Connect your devices to the USB-C charging ports located at the front of each slot.
  4. Näytön lataustila: Integrated LED indicators above each port show the charging status:
    • Punainen: Laite latautuu parhaillaan.
    • Vihreä: Charging process is complete, or no device is connected.
  5. Sulje ja lukitse: Once devices are connected, close and lock the front door for security.
Edessä view of the Digitus DN-45004 charging cabinet with labels for LED charging indicator, UV-C lighting switch, and USB-C charging port.
Kuva 5.1: Päättynytview of the charging cabinet features, including LED indicators and USB-C ports.
Sisustus view of the Digitus DN-45004 charging cabinet with multiple tablets connected to USB-C cables and charging.
Figure 5.2: Devices being charged inside the cabinet.

5.2 UV-C Lamp Toiminta

The integrated UV-C lamps provide a sterile environment for your devices.

  1. Activate UV-C: Locate the switch for UV-C lighting (refer to Figure 5.1). Toggle the switch to activate the UV-C lamps.
  2. Ensure Door is Closed: For safety and effective sanitation, ensure the cabinet door is securely closed while the UV-C lamp on aktiivinen.
  3. Deactivate UV-C: Toggle the switch again to turn off the UV-C lamps.
Sisustus view of the Digitus DN-45004 charging cabinet with the UV-C lamp illuminated, showing a blue glow.
Figure 5.3: Interior with UV-C light active.
Lähikuva view UV-C lamp installed inside the Digitus DN-45004 charging cabinet.
Figure 5.4: Close-up of the UV-C lamp.

5.3 Jäähdytysjärjestelmä

The cabinet includes an integrated fan and ventilation slots for active cooling. The fan automatically activates when the internal temperature exceeds 40°C to prevent overheating of devices and internal components.

6. Huolto

7. Vianmääritys

OngelmaMahdollinen syyRatkaisu
Cabinet does not power on.Power cable not connected, power outlet issue, or internal circuit breaker tripped.Ensure power cable is firmly connected. Test the power outlet. Check and reset the internal circuit breaker (refer to Section 4. Setup).
Laite ei lataudu.Device not properly connected, faulty USB-C cable, or device issue.Ensure the device is correctly plugged into the USB-C port. Try a different USB-C cable. Test the device with another charger. Check the LED indicator (should be red when charging).
UV-C lamp ei käynnisty.UV-C switch off, lamp failure, or door not fully closed.Ensure the UV-C switch is in the 'On' position. Verify the cabinet door is securely closed. If the issue persists, the lamp saattaa tarvita vaihtoa.
Laptops do not fit in the slots.The cabinet is designed for smaller portable devices.This model is optimized for tablets and smartphones. Please check device dimensions against cabinet specifications.

8. Tekniset tiedot

OminaisuusYksityiskohta
MerkkiNUMERO
MallinumeroDN-45004
VäriMusta (RAL 9005)
MateriaaliSeosteräs
Mitat (K x L x S)345 x 360 x 370 mm
Sisäisen hyllyn syvyys294 mm
USB-C latausportit10
USB-C Output per Port18 W (5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A)
Max USB-C Output180 W
VirransyöttöC19; 110 / 220 VAC, 50/60 Hz, 16 A
Kokonaisteho3500 W
JäähdytysIntegrated fan, automatic activation at >40°C
TurvallisuusSteel front door with 3-point lock
ErikoisominaisuudetUV-C lamps for hygiene, LED charging indicators
Yhteensopivat laitteetÄlypuhelimet, tabletit

9. Takuu ja tuki

Warranty information for the Digitus DN-45004 Mobile Desktop Charging Cabinet is not available in the provided product data. Please refer to the manufacturer's official webKatso tarkemmat takuuehdot verkkosivustoltasi tai ostopaikastasi.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact DIGITUS customer service directly. You can often find contact information on the manufacturer's websivustolla tai tuotteen pakkauksessa.

For more information about DIGITUS solutions, visit: Assmann Solutions