EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Malli: ZM4328

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Turvallisuusohjeet

  • Sähköturvallisuus: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before installation or maintenance.
  • Voitage: This product operates on a 230V AC power supply.
  • IP54 luokitus: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Valon lähde: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
  • Käyttölämpötila: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Asennus ja asennus

Noudata näitä ohjeita oikean asennuksen varmistamiseksi:

  1. Katkaise virta: Ennen aloittamista varmista, että asennusalueen päävirtalähde on katkaistu sulakkeesta.
  2. Valmistele asennuspinta: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Kiinnitä asennusteline: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Takaisin view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

Kuva 3: Takaosa view with mounting bracket.

  1. Johdotus: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Palauta virta: Switch the main power supply back on.

5. Käyttöohjeet

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Liiketunnistimen toiminnallisuus

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • Havaintoalue: Adjusts the maximum distance at which motion is detected.
  • Odotusaika: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.

Huomautus: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Huolto

  • Puhdistus: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Hyönteisten torjunta: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Ei käyttäjän huollettavia osia: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

7. Vianmääritys

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

OngelmaMahdollinen syyRatkaisu
Valo ei syty.Ei virtalähdettä.
Virheellinen johdotus.
Daylight sensor setting too high.
Tarkista sulake ja virtaliitäntä.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
Valo palaa jatkuvasti.Jatkuvaa liikettä havaittu.
Hold time setting too long.
Anturin toimintahäiriö.
Ensure no constant movement in the detection area.
Adjust the hold time setting on the DIP switches to a shorter duration.
Jos ongelma jatkuu, ota yhteyttä tukeen.
Light turns on/off too frequently.Herkkyys liian korkea.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Sensor does not detect motion.Sensitivity too low.
Detection range too narrow.
Esteitä estävä anturi.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Tekniset tiedot

MerkkiEMOS
MallinumeroZM4328
Mitat (halkaisija x korkeus)220 mm x 53 mm (approx. 8.66 in x 2.09 in)
Paino622 grammaa (noin 1.37 paunaa)
Tehoa15 wattia
Valovirta1500 lumenia
Värilämpötila4000 kelviniä (neutraali valkoinen)
Värintoistoindeksi (CRI)80
Hehkulampun ekvivalenssi100 wattia
Voitage230 voltin vaihtovirta
IP-luokitusIP54
MateriaaliAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
ErikoisominaisuudetMicrowave Motion Detector, Energy-saving, Waterproof
EnergiatehokkuusluokkaE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Kuva 6: Tuotteen mitat.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Takuu ja tuki

Takuu

This EMOS ZM4328 TORI LED Ceiling Light comes with a 3 vuoden takuu ostopäivästä lukien. Säilytä ostokuitti takuuvaatimuksia varten. Takuu kattaa materiaali- ja valmistusvirheet normaalissa käytössä.

Asiakastuki

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS websivusto.

Aiheeseen liittyvät asiakirjat - ZM4328

Preview EMOS ZM3131 ZM3231 LED Wall Luminaire with PIR Sensor - Specifications and Manual
Detailed information and user manual for the EMOS ZM3131 and ZM3231 LED wall luminaires featuring a PIR sensor. Includes specifications, mounting instructions, and safety warnings.
Preview EMOS G1125 PIR-liiketunnistin: Tekniset tiedot ja asennusopas
EMOS G1125 PIR -liiketunnistimen yksityiskohtaiset tekniset tiedot, ominaisuudet ja asennusopas. Lue lisää sen tunnistusalueesta, herkkyydestä, tehosta ja muusta.
Preview EMOS LED-paneelit: Upotettavat ja integroitavat valaisimet - Tekniset tiedot, asennus ja takuu
Comprehensive guide to EMOS LED panels, including recessed and built-in models (ZD11xx and ZD21xx series). Features detailed specifications, installation instructions, safety warnings, energy efficiency information, and warranty details for indoor lighting applications.
Preview EMOS GS11111 PIR-liiketunnistin - Sisätilojen automaattinen valaistuksen ohjaus
Yksityiskohtaista tietoa EMOS GS11111 PIR -liiketunnistimesta, mukaan lukien tekniset tiedot, asennusopas ja turvallisuusohjeet automaattiseen sisävalaistuksen ohjaukseen.
Preview EMOS ZS2313W, ZS2333W, ZS2323W LED Floodlights with PIR Sensor: Specifications and Installation Guide
Comprehensive technical specifications, installation instructions, maintenance guidelines, and safety warnings for EMOS ZS2313W, ZS2333W, and ZS2323W LED floodlights featuring integrated PIR motion sensors. Includes details on PIR sensor parameters, mounting, wiring, and product compliance.
Preview P56400S Häkäilmaisimen käyttöohje | EMOS
Kattava käyttöopas EMOS P56400S -hiilimonoksidin (CO) ilmaisimelle. Opi turvallisuusohjeista, teknisistä tiedoista, asennuksesta, käytöstä, mobiilisovelluksen integroinnista EMOS GoSmartiin ja vianetsinnästä.