Nerf Alpha Strike Claw QS-4 Blasterin käyttöohje

1. Turvallisuustiedot

Please read and understand all safety warnings before operating the Nerf Alpha Strike Claw QS-4 Blaster.

• VAROITUS: Do not aim at eyes or face. Use of eyewear is recommended for players and people within range.
• Use only official NERF Elite foam darts. Other darts may not meet safety standards.
• Do not modify the blaster or darts.
• Suositellaan 8 -vuotiaille ja sitä vanhemmille.

2. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki tarvittavat osat:

• 1x Nerf Alpha Strike Claw QS-4 Blaster
• 4x Official Nerf Elite Foam Darts

Image: The Nerf Alpha Strike Claw QS-4 Blaster shown with its packaging and the included 4 official Nerf Elite foam darts.

3. Asennus

3.1 Tikanheittojen lataaminen

1. Locate the 4 dart barrels at the front of the blaster.
2. Insert one Official Nerf Elite foam dart into each barrel until it is seated firmly.

Image: A hand demonstrates inserting a blue Nerf Elite foam dart into one of the four barrels of the Nerf Alpha Strike Claw QS-4 Blaster.

4. Käyttöohjeet

4.1 Priming the Blaster

1. Grip the blaster firmly with one hand.
2. With your other hand, pull the priming handle located at the back of the blaster all the way back until it clicks into place. This action prepares one dart for firing.

Image: A person's hands demonstrate pulling back the priming handle on the Nerf Alpha Strike Claw QS-4 Blaster, preparing it to fire.

4.2 Firing a Dart

1. Once the blaster is primed, aim at your target (remembering safety warnings).
2. Pull the trigger to fire one dart.
3. To fire another dart, repeat the priming and firing steps. The blaster automatically rotates to the next loaded barrel.

Image: A person, wearing safety glasses, holds the Nerf Alpha Strike Claw QS-4 Blaster, aiming it forward as if firing a dart.

4.3 Opetusvideo

5. Huolto

5.1 Puhdistus

• Pyyhi Blaster mainoksellaamp cloth to remove dust or dirt. Do not submerge in water.
• Ensure darts are clean and free of debris to prevent jamming.

5.2 Dart Care

• Store darts in a clean, dry place to maintain their shape and performance.
• Avoid bending or crushing darts, as this can affect their flight and cause jams.

6. Vianmääritys

6.1 Dart Not Firing

• Ensure the blaster is fully primed by pulling the priming handle all the way back until it clicks.
• Check that the dart is fully inserted into the barrel.
• Inspect the dart for any damage or deformation. Replace damaged darts with new, official Nerf Elite foam darts.

6.2 Blaster Jamming

• If a dart becomes stuck, ensure the blaster is not primed and carefully remove the dart from the barrel.
• Always use official Nerf Elite foam darts to minimize the risk of jamming.

7. Tekniset tiedot

8. Takuu ja tuki

This product comes with a manufacturer's warranty. For detailed warranty information or customer support, please refer to the official Nerf websivustolla tai ota yhteyttä asiakaspalveluun.

Lisäapua varten käy osoitteessa Nerf Store on Amazon.