Milwaukee M12FCOT-0 Fuel Cut Off Tool Instruction Manual

Johdanto

The Milwaukee M12FCOT-0 Fuel Cut Off Tool is designed for fast and efficient cutting in various materials. This compact and powerful tool offers versatility for professionals and DIY enthusiasts alike. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tool.

Tuote loppuview

The Milwaukee M12FCOT-0 is a 12V cordless cut off tool, optimized for one-hand use. It features forward and reverse rotation to control debris direction and an integrated LED work light for improved visibility. Its ergonomic, in-line design enhances control and line of sight during operation.

The Milwaukee M12FCOT-0 Fuel Cut Off Tool, showcasinsen kompaktin muotoilun ja punaisen ja mustan värimaailman ansiosta.

The Milwaukee M12FCOT-0 Fuel Cut Off Tool with the blade guard in place, highlighting the cutting disc.

The Milwaukee M12FCOT-0 Fuel Cut Off Tool from another angle, showing the dust extraction port and adjustable base.

A user operating the Milwaukee M12FCOT-0 Fuel Cut Off Tool to cut a metal pipe in an overhead application.

Asennus

1. Akun asennus: Ensure the tool is off. Align the M12 battery with the tool's battery port and slide it in until it clicks securely into place. To remove, press the release tab and slide the battery out.
2. Terän asennus: Refer to the tool's specific instructions for blade changes. Typically, this involves disengaging the spindle lock, using a wrench to loosen the arbor nut, replacing the cutting disc, and then re-tightening the nut and releasing the spindle lock. Always use the correct blade type and size for your application.
3. Guard Adjustment: The tool features an adjustable guard. Rotate the guard to the desired position to ensure maximum protection while allowing for the necessary cutting depth and angle. Ensure the guard is securely locked before operation.

Käyttöohjeet

1. Virran kytkeminen päälle/pois: To start the tool, press the safety lock-off button (if present) and then squeeze the trigger. Release the trigger to turn the tool off.
2. Kierto eteen/taakse: The M12FCOT-0 features a directional switch for forward and reverse rotation. Select the appropriate direction to control debris expulsion, directing sparks and dust away from the user or sensitive areas.
3. Leikkaustekniikat: Always wear appropriate personal protective equipment (PPE), including eye protection, gloves, and hearing protection. Hold the tool firmly with one hand. Allow the blade to reach full speed before engaging the workpiece. Apply steady, even pressure and let the tool do the work. Avoid forcing the cut, which can lead to kickback or damage to the tool/blade.
4. LED työvalo: The integrated LED work light illuminates the work surface, improving visibility in dimly lit areas.

Huolto

• Puhdistus: Regularly clean the tool's ventilation openings to prevent overheating. Use a soft, dry cloth. Do not use water or chemical cleaning agents.
• Terän vaihto: Replace worn or damaged cutting blades promptly. Always ensure the tool is disconnected from its power source (battery removed) before changing blades.
• Akun hoito: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge batteries using only Milwaukee-approved chargers.

Vianetsintä

Tekniset tiedot

Mitä laatikossa on

• Bare unit only (battery and charger sold separately)

Takuu ja tuki

This Milwaukee tool is covered by the manufacturer's warranty. For detailed warranty information, service, or technical support, please refer to the official Milwaukee websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Säilytä ostokuitti takuuvaatimuksia varten.