Milwaukee M12 FID-0 Cordless Impact Drill User Manual

Johdanto

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Milwaukee M12 FID-0 Cordless Impact Drill. Please read this manual thoroughly before first use and keep it for future reference to ensure proper handling and prolong the tool's lifespan.

Tärkeitä turvallisuustietoja

Always wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves when operating power tools. Ensure the work area is well-lit and clear of obstructions. Keep children and bystanders away from the operating area. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool.

• Lue kaikki tämän sähkötyökalun mukana toimitetut turvallisuusvaroitukset, ohjeet, kuvat ja tekniset tiedot. Kaikkien ohjeiden noudattamatta jättäminen voi johtaa sähköiskuun, tulipaloon ja/tai vakavaan loukkaantumiseen.
• Vältä tahatonta käynnistymistä. Varmista, että kytkin on pois päältä -asennossa ennen akun asettamista, työkalun nostamista tai kantamista.
• Älä altista sähkötyökaluja sateelle tai märille olosuhteille. Sähkötyökaluun pääsevä vesi lisää sähköiskun vaaraa.
• Use the correct tool for your application. Do not force the tool; it will do the job better and safer at the rate for which it was designed.

Tuote loppuview

The Milwaukee M12 FID-0 is a compact and powerful 12V cordless impact drill designed for various fastening and drilling applications. It features a brushless Powerstate motor for increased performance and a Redlink Plus electronic system for intelligent power management.

Tärkeimmät ominaisuudet

• Brushless Powerstate Motor: Provides more power in a compact design (only 130 mm long).
• Redlink Plus Intelligence: Advanced digital overload protection for tool and battery, uniquely enhancing tool performance under load.
• AJOOHJAUS: Allows quick switching between 4 speed and torque settings.
• Redlithium-Ion Battery Technology: Delivers more run time and more work over the life of the pack (battery sold separately).
• Individual Battery Cell Monitoring: Optimizes tool run time and ensures long-term pack durability.
• Hex Bit Direct Drive: Nopeaan ja helppoon teränvaihtoon.
• LED työvalo: Valaisee työalueen.

Komponentit

Refer to the images below for a visual guide to the main components and configurations of your M12 FID-0 impact drill.

Image: Milwaukee M12 FID-0 Cordless Impact Drill with standard chuck attachment. This view shows the main body, handle, battery interface, and the adjustable chuck for various drilling and driving tasks.

Image: Milwaukee M12 FID-0 Cordless Impact Drill configured for hex bit direct drive. This configuration is ideal for quick bit changes and compact fastening applications, showcasing the tool's versatility without the larger chuck.

Image: Milwaukee M12 FID-0 Cordless Impact Drill alongside its various interchangeable attachments, including a standard chuck, an offset attachment, and a right-angle attachment. These accessories enhance the tool's adaptability for different work scenarios.

Asennus

Akun asennus

The Milwaukee M12 FID-0 requires a 12V Redlithium-Ion battery pack (sold separately).

1. Kohdista akku työkalun kahvan akkuportin kanssa.
2. Liu'uta akku työkaluun, kunnes se napsahtaa tukevasti paikalleen.
3. Irrota akku painamalla akkuyksikön vapautuspainiketta ja liu'uttamalla se ulos.

Bit Installation (Hex Bit Direct Drive)

1. Varmista, että työkalu on sammutettu ja akku on irrotettu turvallisuuden vuoksi.
2. Pull the collar of the hex chuck forward.
3. Insert the hex shank bit fully into the chuck.
4. Release the collar to lock the bit in place. Tug on the bit to ensure it is securely fastened.

Käyttöohjeet

Virran kytkeminen päälle/pois

To turn the tool on, press the trigger switch. The tool speed is variable and controlled by the amount of trigger depression. To turn the tool off, release the trigger switch.

DRIVE CONTROL Settings

The DRIVE CONTROL system allows you to select between four different modes, adjusting the speed and torque for optimal performance in various applications.

1. Tila 1: Lower speed and torque for precision work and delicate materials.
2. Tila 2: Medium speed and torque for general drilling and fastening.
3. Tila 3: High speed and torque for heavy-duty applications.
4. Tila 4 (itsekierteittävät ruuvit): Optimized for self-tapping screws, providing controlled speed and preventing over-tightening.

Use the mode selector button, typically located near the base of the tool head, to cycle through these settings.

LED työvalo

The integrated LED work light illuminates the work surface when the trigger is pressed, providing better visibility in dimly lit areas.

Huolto

Yleissiivous

Pidä työkalun tuuletusaukot vapaina roskista ylikuumenemisen estämiseksi. Käytä pehmeää,amp cloth to clean the exterior of the tool. Do not use harsh chemicals or abrasive cleaners, as these can damage plastic parts and electronic components.

Akun hoito

For optimal battery life and performance, store Redlithium-Ion battery packs in a cool, dry place, away from direct sunlight and extreme temperatures. Charge batteries using only Milwaukee-approved chargers. The individual cell monitoring system helps prolong battery life, but proper charging and storage practices are still essential for maximum longevity.

Vianetsintä

If you encounter issues with your Milwaukee M12 FID-0, refer to the following common troubleshooting steps:

• Työkalu ei käynnisty: Ensure the battery pack is fully charged and properly inserted. Check if the trigger switch is fully depressed.
• Reduced power or run time: The battery pack may need recharging or could be nearing the end of its lifespan. Ensure the tool is not overloaded during operation.
• Ylikuumeneminen: Check for blocked ventilation openings on the tool. Allow the tool to cool down before continued use. Avoid continuous heavy-duty operation without breaks.
• Bit not holding: Ensure the hex bit is fully inserted and the chuck collar is released to lock it in place. Inspect the chuck for damage or wear.

For persistent issues or problems not covered here, contact Milwaukee customer support or an authorized service center.

Tekniset tiedot

Takuu ja tuki

For detailed warranty information, please refer to the warranty card included with your product or visit the official Milwaukee website. Warranty terms and conditions may vary by region and retailer. For technical support, service, or replacement parts, please contact your authorized Milwaukee dealer or customer service center. Always provide your product model number (M12FID-0) and serial number when seeking support.