Ikan DS1 Beholder Gimbal -käyttöohje järjestelmäkameroille

1. Johdanto

The Ikan DS1 Beholder Gimbal is a 3-axis gyro-stabilized brushless motor gimbal designed to provide smooth, stable footage for DSLR and mirrorless cameras. It is engineered for portability and ease of use, supporting cameras weighing up to 3.7 lbs (1.7 kg). This manual provides essential information for the proper setup, operation, and maintenance of your DS1 Beholder Gimbal.

Figure 1.1: The Ikan DS1 Beholder Gimbal with a DSLR camera attached, demonstrating its primary function as a camera stabilizer.

2. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki seuraavat tuotteet:

• Gimbal-stabilointiaine
• Pikakiinnityslevy
• Camera Offset Bracket
• Three Batteries (Type 18650)
• Akun pidike
• Akun kansi
• Micro USB kaapeli
• USB-LED-valo
• Laser Cut Foam Soft Carry Case

Figure 2.1: All components of the Ikan DS1 Beholder Gimbal stored within its protective carry case.

3. Tuotteen ominaisuudet

• 3-Axis Gyro Stabilized Brushless Motors: Varmistaa sujuvan ja vakaan videokuvantage by counteracting unwanted camera movements across pan, tilt, and roll axes.
• Camera Weight Capacity: Supports DSLR and mirrorless cameras weighing up to 3.7 lbs (1.7 kg).
• Lithium Battery Powered: Utilizes rechargeable lithium-ion batteries for extended operation.
• 3/8” - 16 Tripod Mount Socket: Allows for easy mounting on tripods, monopods, or other support systems.
• Illuminated ON-OFF Switch/Battery Indicator: Provides clear indication of power status and remaining battery life.

4. Asennusopas

4.1 Akun asennus

1. Unscrew the battery cap from the bottom of the gimbal handle.
2. Insert the three 18650 lithium-ion batteries into the battery holder, ensuring correct polarity as indicated.
3. Place the battery holder with batteries into the gimbal handle.
4. Securely screw the battery cap back onto the handle.

Figure 4.1: The battery holder with three 18650 batteries being inserted into the gimbal handle.

4.2 Kameran kiinnitys

1. Attach the quick release plate to the bottom of your camera using the provided screw. Ensure it is securely fastened.
2. If your camera setup requires it, use the camera offset bracket to adjust the camera's position for optimal balance.
3. Slide the quick release plate with the camera into the gimbal's camera mount.
4. Lock the quick release mechanism to secure the camera.

Figure 4.2: The quick release plate and camera mounting area, showing adjustment points for camera placement.

4.3 Kameran tasapainottaminen

Proper balancing is critical for optimal gimbal performance and to prevent motor strain. The camera must be balanced on all three axes (tilt, roll, and pan) before powering on the gimbal.

1. Kallistusakselin tasapaino: Adjust the camera's forward/backward position on the quick release plate until the camera remains level when tilted forward or backward.
2. Rulla-akselin tasapaino: Adjust the camera's left/right position until the camera remains level when rotated along its roll axis.
3. Panorointiakselin tasapaino: Hold the gimbal horizontally and adjust the pan arm until the gimbal remains stable without drifting to one side.

Huomautus: Cameras with heavy front lenses may require careful adjustment or an offset bracket to achieve proper balance. Ensure the camera can move freely without obstruction from the gimbal body.

5. Käyttö

5.1 Virran kytkeminen päälle/pois

Press and hold the illuminated ON-OFF switch located on the handle to power the gimbal on or off. The indicator light will show the battery status.

5.2 Toimintatilat

The DS1 Beholder Gimbal typically features multiple operating modes to suit various shooting scenarios. Refer to the quick start guide or manufacturer's website for specific mode activation and functionality. Common modes include:

• Seuraa tila: The camera smoothly follows the operator's pan and tilt movements.
• Lukitustila: The camera maintains a fixed direction, regardless of the operator's movements.
• Käänteinen tila: Allows for underslung shots by holding the gimbal upside down.

Kärki: Practice with the gimbal in a safe environment to familiarize yourself with its controls and modes before critical shoots.

6. Huolto

• Puhdistus: Puhdista gimbaali pehmeällä, kuivalla liinalla. Vältä nestemäisten puhdistusaineiden tai liuottimien käyttöä.
• Varastointi: Store the gimbal in its protective carry case in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Akun hoito: Charge batteries fully before each use. Do not overcharge or completely drain the batteries.
• Laiteohjelmistopäivitykset: Periodically check the Ikan websivustolta saatavilla olevat laiteohjelmistopäivitykset optimaalisen suorituskyvyn ja yhteensopivuuden varmistamiseksi.

7. Vianmääritys

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information, technical support, or service inquiries, please contact Ikan customer support directly. Details can typically be found on the official Ikan websivustolla tai tuotepakkauksessa.

Websivusto: www.ikancorp.com