Philips 800144 Downlight Surface Mounted LED Fixture User Manual

Tuote loppuview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

Tärkeimmät ominaisuudet:

• Energiatehokkuus: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
• Pitkä käyttöikä: Rated for 36,000 hours (based on 3 hours/day usage).
• Monipuolinen asennus: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
• Pehmeä valkoinen valo: Provides a comfortable ambiance for general room lighting.
• Himmennettävä: Compatible with dimmer switches for adjustable brightness.
• Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

Asennus ja asennus

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

Asennusvaiheet:

1. Turvallisuus ennen kaikkea: Ensure power to the installation area is turned off at the circuit breaker before beginning.
2. Valmistele asennuspinta: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
3. Kytke johdotus: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
4. Kiinnitysteline: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
5. Palauta virta: Kun valaisin on asennettu ja kytketty tukevasti, kytke virta takaisin sulakkeesta.
6. Testauksen toiminnallisuus: Kytke valokytkin päälle varmistaaksesi, että se toimii oikein.

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

Käyttöohjeet

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

Valon värilämpötila:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

Himmennettävä toiminto:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

Huolto

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

Puhdistus:

• Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
• Pyyhi valaisimen ulkopinta pehmeällä,amp kangas.
• Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Varmista, että valaisin on täysin kuiva ennen virran kytkemistä uudelleen.

Vianetsintä

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

• Valo ei syty:
  • Tarkista sulake varmistaaksesi, että valaisimeen tulee virtaa.
  • Varmista, että valokatkaisin on "päällä"-asennossa.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Valon välkkyminen:
  • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
  • Tarkista löysät johtoliitännät.
  • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
• Light is Dim or Uneven:
  • If using a dimmer, ensure it is set to the desired brightness level.
  • Verify that the fixture is receiving the correct voltage (120 volttia).

If these steps do not resolve the issue, contact Philips customer support for further assistance.

Tekniset tiedot

Takuutiedot

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering 2 vuotta osille ja työlle ostopäivästä lukien. Säilytä ostokuitti takuuvaatimuksia varten.

For warranty service or questions, please contact Philips customer support.

Asiakastuki

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips websivustolta yhteystiedot ja tukiresurssit.

Valmistaja: Philipsin valaistus

Merkki: Philips