Eldom 72326NMP 15L lämminvesivaraajan käyttöohje

1. Johdanto

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Eldom 72326NMP 15L Hot Water Storage Heater. Please read these instructions carefully before using the appliance and retain them for future reference.

The Eldom 72326NMP is a pressure-resistant hot water storage tank designed for over-table installation. It features a steel container with high-performance enameling and additional anti-corrosion anode protection. A temperature controller allows for stepless adjustment of the water temperature.

Kuva 1: Edessä view of the Eldom 72326NMP 15L Hot Water Storage Heater. The unit is white with the Eldom logo prominently displayed. A control knob for temperature adjustment and a red power switch are visible at the bottom.

2. Tärkeitä turvallisuusohjeita

Failure to follow these safety instructions may result in electric shock, fire, or serious injury. Keep this manual in a safe place for future reference.

• Lue kaikki ohjeet ennen asennusta ja käyttöä.
• Installation and maintenance must be performed by a qualified technician in accordance with local regulations and this manual.
• Varmista virtalähteen voltage vastaa laitteen luokitustarraa (230 V/50 Hz).
• Do not operate the water heater if the power cord or plug is damaged.
• Älä upota laitetta veteen tai muihin nesteisiin.
• Tätä laitetta ei ole tarkoitettu sellaisten henkilöiden (mukaan lukien lapset) käytettäväksi, joilla on alentuneet fyysiset, sensoriset tai henkiset kyvyt tai joilla ei ole kokemusta ja tietoa, ellei heidän turvallisuudestaan ​​vastaava henkilö ole valvonut tai opastanut laitteen käyttöä. .
• Lapsia tulee valvoa sen varmistamiseksi, etteivät he leiki laitteella.
• The water heater must be properly grounded.
• Älä tuki paineenalennusventtiiliä.
• Before any maintenance or cleaning, always disconnect the appliance from the power supply.
• The appliance must be installed in an area where it is protected from freezing temperatures.

3. Pakkauksen sisältö

Tarkista pakkauksesta seuraavat tuotteet:

• Eldom 72326NMP Hot Water Storage Heater
• Inlet Valve (Combi Check Valve)
• Käyttöopas

4. Tekniset tiedot

Kuva 2: EU Energy Label for the Eldom 72326NMP water heater, showing an energy efficiency class of B and an annual energy consumption of 517 kWh.

Kuva 3: Product data sheet for the Eldom 72326NMP water heater, detailing technical specifications such as power, voltage, capacity, dimensions, and energy efficiency.

5. Asennus

Installation should only be carried out by a qualified professional. Ensure all local plumbing and electrical codes are met.

5.1 Lämmittimen asentaminen

• The heater is designed for over-table (under-sink) installation.
• Choose a suitable location that can support the weight of the heater when full (approx. 15L water + 9.6kg unit = ~25kg).
• Ensure adequate clearance around the unit for ventilation and maintenance.

5.2 Vesiliitäntä

The water heater requires a 1/2 inch cold and hot water connection.

1. Sulje päävesijohto.
2. Connect the cold water inlet (marked blue) to the cold water supply line.
3. Install the supplied combi check valve on the cold water inlet. This valve prevents backflow and manages pressure.
4. Connect the hot water outlet (marked red) to the hot water faucet.
5. Varmista, että kaikki liitännät ovat tiukkoja ja vuotamattomia.
6. Open the main water supply and allow the tank to fill completely. Open a hot water tap to release air from the system until water flows steadily.

Kuva 4: Diagram illustrating the water connection for the Eldom 72326NMP water heater. It shows the cold water inlet, hot water outlet, and the placement of the shut-off valve, pressure reducing valve (if needed), and the combined check valve.

5.3 Sähköliitäntä

• The appliance comes with a power cable and plug.
• Connect the plug to a properly grounded 230V/50Hz electrical outlet.
• Älä käytä jatkojohtoja tai sovittimia.

6. Käyttö

6.1 Ensimmäinen käynnistys

1. Ensure the water heater is completely filled with water (as per installation step 5.2).
2. Liitä virtajohto pistorasiaan.
3. Turn on the power switch on the front of the unit. An indicator light should illuminate.

6.2 Lämpötilan säätö

• Use the temperature control knob on the front panel to set the desired water temperature.
• The temperature can be adjusted steplessly.
• Allow time for the water to heat up. The warm-up time from 12°C to 65°C is approximately 27 minutes.

7. Huolto

Säännöllinen huolto varmistaa vedenlämmittimesi pitkän käyttöiän ja tehokkaan toiminnan. Irrota aina virtalähde ennen huoltotoimenpiteitä.

7.1 Puhdistus

• Puhdista vedenlämmittimen ulkopinta pehmeällä,amp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Periodically check the pressure relief valve for any blockages or leaks.

7.2 Anoditangon tarkastus

The water heater is equipped with an anti-corrosion anode. This anode should be inspected and replaced periodically by a qualified technician, typically every 1-2 years, depending on water quality.

7.3 Kalkinpoisto

In areas with hard water, limescale can build up inside the tank and on the heating element, reducing efficiency. Descaling should be performed by a qualified technician as needed.

8. Vianmääritys

Ennen kuin otat yhteyttä asiakastukeen, katso seuraavasta taulukosta yleisiä ongelmia ja niiden ratkaisuja.

9. Takuu ja tuki

Your Eldom 72326NMP Hot Water Storage Heater is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.

For technical assistance, spare parts, or warranty claims, please contact your retailer or the authorized Eldom service center in your region. Ensure you have your model number (72326NMP) and proof of purchase available when contacting support.