Johdanto
This manual provides essential instructions for the safe and efficient use of your Dremel 7700-1/15 MultiPro 7.2-volt Cordless Rotary Tool. Please read this manual thoroughly before operating the tool and retain it for future reference.
The Dremel 7700-1/15 MultiPro 7.2-volt Cordless Rotary Tool, shown with its various accessories including sanding bands, grinding stones, polishing wheels, and a storage case.
Turvallisuustiedot
Always wear appropriate personal protective equipment, such as safety glasses, when operating the rotary tool. Ensure the workpiece is securely clamped. Keep hands and loose clothing away from rotating parts. Do not operate the tool near flammable liquids or gases.
Asennus
1. Akun lataaminen
The Dremel 7700-1/15 features a removable 7.2V battery. To charge, detach the battery pack from the tool by squeezing the release tabs on both sides and pulling it off. Connect the battery pack to the provided charger and plug the charger into a standard wall outlet. Allow approximately 3 hours for a full charge.
2. Lisävarusteiden kiinnittäminen
- Press and hold the shaft lock button located on the tool's head.
- Irrota kiristysholkin mutteri.
- Insert the desired accessory shank into the collet. The tool accepts accessories up to 1/8" shank.
- Tighten the collet nut securely while still holding the shaft lock button. Release the shaft lock button.
Käyttöohjeet
1. Powering On/Off and Speed Selection
The Dremel 7700-1/15 has a 2-speed switch (10,000 and 20,000 RPM). Slide the switch to "LO" for 10,000 RPM or "HI" for 20,000 RPM. To turn off the tool, slide the switch to the "OFF" position.
2. Yleisiä käyttövinkkejä
- Apply light pressure when working. Let the tool's speed do the work.
- For best results, use the appropriate accessory for the task.
- The compact and lightweight design allows for easy handling and reduced fatigue during extended use.
Huolto
1. Puhdistus
Puhdista työkalun tuuletusaukot säännöllisesti ylikuumenemisen estämiseksi. Poista pöly ja roskat pehmeällä harjalla tai paineilmalla. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
2. Akun hoito
Store the battery in a cool, dry place. For optimal battery life, avoid fully discharging the battery before recharging. Refer to model No. 757-01 for replacement battery packs.
3. Lisävarusteiden vaihto
Replace worn or damaged accessories promptly to maintain performance and safety. Follow the accessory attachment instructions when replacing.
Vianetsintä
- Työkalu ei käynnisty: Ensure the battery is fully charged and properly inserted. Check the power switch position.
- Heikentynyt suorituskyky: The accessory may be worn, or the battery may need recharging. Ensure the correct speed setting is selected for the task.
- Liiallinen tärinä: Check that the accessory is correctly installed and tightened in the collet. Replace any bent or damaged accessories.
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Merkki | Dremel |
| Mallinumero | 7700 |
| Voitage | 7.2 volttia |
| Virtalähde | Akkukäyttöinen (johdoton) |
| Nopeudet | 2-speed (10,000 RPM, 20,000 RPM) |
| Suurin pyörimisnopeus | 20,000 RPM |
| Miniminopeus | 10,000 RPM |
| Accepts Shank Size | Jopa 1/8" |
| Tuotteen paino | 12 unssia |
| Mukana olevat komponentit | Battery, Charger, 15 Accessories, Storage Bag |
| Suositellut käyttötavat | Sharpening, Grinding, Engraving, Sanding, Polishing |
Takuutiedot
The Dremel 7700-1/15 MultiPro comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your product or visit the official Dremel websivusto.
Tukea
For technical assistance, replacement parts, or general inquiries, please contact Dremel Customer Service. Contact information can typically be found on the Dremel websivustolla tai tuotepakkauksessa.
Visit the official Dremel Store for more information and accessories: Dremel-myymälä
