Fevos FL02 Sound Clock
Box contents
- One DreamWave
- 1 USB Type C charging cable
- 1 This user manual
Product Overview
- Touch area (lighting function)
- White noise button
- Switch button
- Volume button
- Timing button
- Setting button
- LED indicator (Bluetooth and charging)
- USB Type C charging port
Feature
- Built-in eight kinds of white noise
- Hidden digital screen design
- Two machines can be TWS paired to synchronize LED lights and white noise
- for outdoor use (IPX4)
- USB Type-C charging
Charging
We recommend that you fully charge the SoundClock battery before using it for the first time. The first full charge via USB C takes about 3 hours.
LED indicator information (Charging)
| Charge using a USB C cable | LED Light Status (Red) |
| charge | The LED indicator continues to light up |
| in use | LED indicator light off |
| low battery | The LED indicator blinks red |
| Fully charged | The LED indicator is green |
Charging with a USB C cable
- Connect the attached USB C-type cable to the SoundClock charging port.
- Plug the USB port of the cable into any USB charger.
Operating instructions
Set up a SoundClock
Top touch button function
| Unlock and light up | Click the top touch button |
| Screen brightness | Press and hold the top touch button to change the brightness level of the screen. |
| Snooze mode | Click to enter snooze mode and press any key in the back to turn off the alarm |
| Pause music | When the screen is lit, click to control the play and pause of white noise and Bluetooth music |
Time setting
- Press the
key and the icon will be displayed on the screen to enter the setting mode. - Short +/- button, when the
icon is displayed on the screen, press thekey to enter the clock setting interface; - short press +/- key set, short press key notarize. Time format 12/24 hour system, time (clock, minute)
Alarm setting
- Short press the key, the screen will display the icon to enter the setting mode;
- Press +/- the key. When the icon is displayed, press thekey to enter the alarm setting screen.
- Press +/- to set the Settings and press to confirm.
Screen brightness Settings
- Press the key and the icon will be displayed on the screen to enter the setting mode.
- Press the +/- key. When the
icon is displayed, press thekey to set the brightness screen. - Press +/- to set and press to confirm.
You can set the screen brightness (5 brightness levels), automatic screen off time (5 seconds, 10 seconds, 15 seconds, 30 seconds).
Two Soundclocks synchronized (TWS Interconnect)
- Double-click the key to switch to Bluetooth mode;
- Double-click the top touch button to enable Bluetooth TWS pairing. After the pairing is successful,
icon will be displayed on the screen; - Double click the top touch button to cancel the Bluetooth TWS pairing. After successfully canceling, the icon on the screen will not be displayed; After the two TWS are connected, white noise playback and timing can be synchronized, and Bluetooth connection with the phone can be synchronized.
Single SoundClock Bluetooth connection to mobile device
- First, double-click to switch to Bluetooth mode;
- Enable Bluetooth for mobile devices;
- Select the Bluetooth name “SoundClock” from the Bluetooth list of your mobile device and click to pair the connection.
Connection between two SoundClock TWS and mobile devices after interconnection
- Enable Bluetooth for mobile devices;
- Select the “SoundClock” Bluetooth name from your mobile device’s Bluetooth list and tap to pair the connection.
Safety precautions
- IPX4 waterproof, rain proof, splash proof and spray proof.
- Do not put the device into water to avoid internal short circuit, overheating, fire, deformation, or even internal battery explosion.
- Do not store the equipment in extremely hot or cold areas. Recommended for use at room temperature.
- Do not attempt to repair, repair or disassemble the device by yourself.
- Ensure that you comply with the technical specifications for charging and do not use a power adapter whose output voltage exceeds the specified value to avoid any irreversible damage to the internal circuit (DC input voltage: 5V).
Product specification
- Material Plastic
- Weight 200g / 0.44lbs
- Size 124.7*90.8*38.2mm
- Battery capacity :1200 mAh
- Charging system USB Type C interface
- Charging time (USBC type) about 3 hours
- Normal battery life up to 8h
- Bluetooth@ (Bluetooth) can be connected range: 8m
- frequency range: 2402M-2480MHZ
- Input interface: USB C
- Battery type: lithium polymer
- Battery voltage: 3.7V
- Operating temperature: 0°C -45°C
- International guarantee :1 year
FCC warning
This device complies with Part 15 of the FCC Rules.
Operation meets the following two conditions:
- This equipment does not produce harmful interference, and
- this equipment must accept any interference received, including interference that may cause unintended operation. Any change or modification without the express approval of the responsible party for compliance may give the user no right to operate the equipment.
Note: This device has been tested to comply with the restrictions on Class B digital devices in Part 15 of the FCC Rules.These restrictions are intended to provide reasonable protection against harmful disturbances in residential installations.The device produces uses and can radiate RF energy, which, if not installed and used according to instructions, may cause harmful interference with radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this device does cause harmful interference with radio or television reception (which can be determined by turning off and lifting the device), users are advised to try to correct the interference by one or more of the following measures:
- Readjust or place the receiving antenna.
- Increase the distance between device and receiver.
- Connect the device to a circuit socket different from the circuit connected to the receiver.
- Consult a dealer or experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
Fevos FL02 Sound Clock [pdf] Owner's Manual FL02 Sound Clock, FL02, Sound Clock, Clock |
