– Located in the detergent drawer of the washing machine, the FiberCatcher™ filter captures up to 90% of synthetic miJcrofibres as the water passes through it. It is activated on the synthetic wash cycles shown below:

Once one of these programs is selected, the FiberCatcher ™ LED will illuminate to show the filter is active

– The filter is designed to last up to 6 months*. Once the filter is full, the FiberCatcher  ™LED will flash when one of the application
programs is selected. When this happens, it is time for a new filter. **
*Exact duration is dependent on usage
**Your washing machine will continue to work when the filter is full
– Purchase your replacement filter today from grundig.co.uk/fiber-catcher

How do I replace my used FiberCatcher™ filter?
1.

Press the button, then pull the drawer towards you to remove it.
2.

Lift out the FiberCatcher™ filter.

3.

Replace with a new filter and reinsert the drawer
4.
– Replace with a new filter and reinsert the drawer
Do not wash the used filter, please return it to us using the instructions in this leaflet.

– The filter isn’t suitable for household recycling, so please return it to us free of charge, to be recycled, in four easy steps:
– 1. Use the same box that your new filter was delivered in, which will include a returns label. If the label has been misplaced, if you are returning your first filter or if you are an
– 2.ROI resident, please email fibercatcher@grundig.com to request a new returns label.
– 3. Ensure the filter has had time to dry before sending it, otherwise, the box may become wet and damaged.
– 4. Attach the returns label to the outside of the box, covering any existing postage label.
– 5. Post the filter in a post box or at your nearest post office.

– Filter returned to Grundig

– Filter sent to specialist recycling center

– Recycled plastic used to make new items