Fanvil A12V IP Video Intercom

Package Contents

Physical Specification

Dimensions: I 205 x 120 x 47 (mm)

Dimensions

Interface description

Installation diagram

A12 series intercom has two types of accessories: WM612 wall-mounted bracket and EX612 flush-mounted bracket. You need to select the corresponding installation accessories before installation.

Mounting accessories are not included in the standard and need to be purchased separately!

WM612 Wall-mounted bracket

EX612 Flush-mounted bracket:

Wall-mounted installation:

1. Paste the installation drawing of the wall-mounted bracket on the wall, and then use the electric drill to make the corresponding hole position.
   
2. The white rubber was plugged into the wall and the wall-mounted bracket fixed with screws to the wall.
   
3. Fix the sealing silicone ring on the back of A 12 according to the hole position.
   
4. After connecting the power cables, network cables, and security interface cables, place the A 12 on the wall-mounted bracket.
   
5. Power on the device, If it works normally, then use the screws to fix A12 to the wall-mounted bracket, and the installation is complete.

Flush-mounted installation:

1. Make a hole of the corresponding size on the wall (recommended size: the length range is 199-201 mm, the width range is 114-116mm, the depth range is 20-25mm), and paste the installation drawing of the flush-mounted bracket on the wall, and then use an electric drill to make the corresponding hole position.
   
2. The white rubber plugged into the wall and the flush-mounted bracket fixed with screws to the wall, and insert the flush-mounted bracket cover plate stuck on the flush-mounted bracket.
   
3. Fix the sealing silicone ring on the back of A12 according to the hole position.
   
4. After connecting the power cables, network cables, and security interface cables, place the A12 on the flush-mounted bracket.
   
5. Power on the device, If it works normally, then use the screws to fix A 12 to the flushl-mounted bracket, and the installation is complete.

Searching IP address

There are two methods as shown below to search the device.

Methods 1:
The default WAN mode is DHCP, querying the IP address with the Device Manager: Download link for Device Manager:
https://www.fanvil.com.cn/downfile.aspx?filepath=
https://www.fanvil.com.cn/upload/files/firmware/tools/20230919/DeviceManager_1.0.6(Installation_free).
tar.gz&filename=DeviceManager_ 1.0.6(Installation_free).tar.gz

Method 2:
Press and hold the Call-Button for 3 seconds(after power-on for 30 seconds), and when the speaker beeps rapidly, press Call-Button again quickly, the beeps stop, the intercom will report the IP address by itself.
In addition, device provides the device surface Call-Button operation to switch IP address acquisition mode:
Press and hold the Call-Button for 3 seconds, and when the speaker beeps rapidly, and then press the Call-Button three times, after the success of the system automati­cally broadcasts the current IP address.

Intercom configuration

• Step 1: Log in the WEB admin interface of the device
  • Input IP address (e.g.http:/1172.18.26.7) into the address bar of the PC’s web browser.
  • The default user name and password are both admin.
• Step 2: Add SIP account
  • (Line) » (SIP)
  • Set the SIP server address, port, username, password and SIP user with assigned SIP account parameters. Select click to take effect.
• Step 3: Set the Intercom parameters
  • (Intercom Settings) » (Media Settings) » (Media Settings) »Set the volume of the device » Click (Apply) to take effect.
  • Speakerphone Volume: Set the speaker output volume.
  • Hand-free mic Gain: Set the microphone volume.
• Step 4: Set the DSS key
  • (Function Key) » (Function Key Settings) » Set speed dial parameters for DSS keys» Click (Apply) to take effect.
  • Type: Memory Key
  • Value: The DSS Key will dial to this Number 1
  • Line: Working line.
  • Subtype: Speed Dial
• Step 5: Set the security function
  • (Security Settings) » (Input Settings) / (Output Settings)
  • Two short circuits input and output configuration, trigger ring, tamper detection configuration.

Fanvil Technology Co., Ltd

Website: www.fanvil.com
Email: sales@fanvil.com
support@fanvil.com
Tel: +86-755-2640-2199
Fax: +86-755-2640-2618
Add: 10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao’an District, Shenzhen, China

Documents / Resources

Fanvil A12V IP Video Intercom [pdf] Installation Guide A12V IP Video Intercom, A12V, IP Video Intercom, Video Intercom

References

• User Manual