FANTECH WGP15V2 Multi-Platform Wireless Controller
Specifications
| Specification | Details |
|---|---|
| Model Number | WGP15V2 |
| Number of Buttons | 12 |
| Connectivity | StrikeSpeed Wireless, BT 5.0, Wired |
| Thumbstick Type | Hall-Effect |
| Trigger Type | Hall-Effect |
| Face Button Type | Membrane |
| D-pad Button Type | Membrane |
| Turbo | Yes |
| Vibration | 4-level adjustable |
| Macro Buttons | 12 |
| Polling Rate | 1000 Hz (Wired), 1000 Hz (Wireless) |
| Battery Capacity | 1000 mAh Li-ion |
| Battery Life | Up to 26 Hours |
| Weight | 272 ± 3 g |
| Power Rating | 3.7 V / 125 mA |
| Compatibility | Windows 7 or later, Switch, iOS, macOS, tvOS, Android |
Product Usage Instructions
Basic Controls:
- To navigate menus and options, use the D-pad.
- Use the A/B/X/Y buttons for in-game actions.
- Press Start button to start a game or pause gameplay.
Advanced Controls:
- To perform special actions, use combinations like Start + A/B/X/Y buttons.
- For precise movements, utilize the D-pad in combination with other buttons.
- Activate the Share button to capture and share gameplay moments.
Troubleshooting Tips:
- If the controller is not responding, check the battery level and connection.
- Ensure proper positioning of the wireless receiver for uninterrupted signal.
- If buttons are not working correctly, recalibrate the controller.
- Clean the controller regularly to maintain performance.
- Refer to the user manual for more detailed instructions.
Note:
The controller has additional buttons like LT, RT, RB, LB for specific functions.
BOX CONTAIN
TRIGGER LOCKS
- Instantly reduce the Trigger pull for faster in-game response time by sliding the built-in locks.
CALIBRATE GAMEPAD
To initiate the calibration process for your gamepad Joystick and Trigger, please press the Turb0+Home+Start button. Once the calibration is complete, kindly press the Select button to conclude the calibration.
LIGHTING MODE
- You can adjust the lighting mode by pressing the Start button & Left D-pad.
- To adjust lighting brightness, press the Select button & IJp/Down D-pad.
- There are 4 lighting modes (Running RGB Mode, Wake Mode, Breathing Mode, Static Mode). On Static Mode, press Start button & Right D-Pad to switch the color to your favourite.
THUMBSTICK & D-PAD INTERCHANGE
To switch the Left Thumbstick to function as a D-Pad, press the Share button twice. Press the Share button twice again to revert the Left Thumbstick back to its original function
INTERCHANGEABLE D-PAD
Take control of your favorite games with precision by swapping out the D-Pad to suit your needs! Just lift up, and replace!
INTERCHANGEABLE THUMBSTICKS
Control your games, your way! Simply pull off the thumbsticks to replace them with higher or lower size, to fit your needs!
ANY QUESTIONS?
- Thanks for choosing Fantech.
- If you have any question or need any help with your products, please do not hesitate to contact us.
- support@fantechworld.com
DOWNLOAD
To further customize your setting, please visit our website and download the software (if applicable).
HOW TO CONNECT
WIRED CONNECTION
BT CONNECTION
2.4GHZ CONNECTION
LED INDICATOR
TURBO & AUTO TURBO MODE
- To activate the Turbo mode, hcld the Turbo button and press the desired Face button.
- Repeat the action to enter the Auto Turbo mode,
- To adjust the Turbo speed, hob the Turbo button and move the Right Anabg stick up or down,
- To clear the Turbo effect, hob the Turbo button for 5 seconds
The Turbo function is available for the following buttons: Face buttons, LT, RT,
RUMBLE MODE
- You can adjust the Rurn& intensity by holding the Turbo button and push the Left Analog stick Up & Down,
- There are 4 level of Rumble
MACRO MODE
- Press and hold the Turbo button + Rear Paddle that you want to assign (ktt or right) until indicator 2 & 3 light
- Press the button that you want to assign, and then press the Rear Paddk again to finish recording the input,
- To erase the macro, please press & hold the Turbo button and Rear Paddle again, You can record up to 63 buttons. If you dont press anything for 5 minutes when recording it ww automatically stop inputting the macra
FAQs
Q: How do I charge the controller?
A: The controller can be charged using the included USB-C cable. Connect it to a power source to charge.
Q: Can I use the controller with other gaming consoles?
A: The controller is designed specifically for Xbox One and may not be compatible with other consoles.
Q: How do I activate the RGB lighting?
A: Press Start button along with the D-pad to cycle through different RGB lighting effects.
Documents / Resources
 |
FANTECH WGP15V2 Multi Platform Wireless Controller [pdf] User Manual WGP15V2 Multi Platform Wireless Controller, WGP15V2, Multi Platform Wireless Controller, Platform Wireless Controller, Wireless Controller |