EXW YM-UD22 5-in-1 Wireless Charging Station
Read this manual carefully before use, and retain it for future reference.
Product Outline
- Magnetic Charging Stand for iPhone 12/13 Series Only
- Apple Watch Charging Stand
- Wireless Charging Dock for Other Phones and Earphones
- LED Lights
- LED Touch Control
- USB Output Port
- Type-C Input Port
- Radiating Hole
- Anti-slip Pads
Product Introduction
- This is a multifunctional 5 in 1 magnetic wireless charging station that can fast magnet charge your for iPhone 12/13 series and simultaneously boosts up the Apple Watch 1/2/3/4/5/6/7/SE, AirPods Pro/2/3, and supported all Qi-enabled devices.
- In addition, we also designed with nightlight and USB output, which frees you from daily plug and pull hassles, let the wireless devices guides you to an easier life.
- The product is designed with a magnetic double coil, you could place the phone vertically or horizontally without affecting charging, and watch your favorite TV show, movies while charging.
Instructions
- USB Cable Connection Connect the Type-C USB quick charge cable to the main body and plug it into the 18W QC 3.0 power adapter.
Note: If charging 4 devices at the same time, for the best charging speed, please choose a PD 30W or above adapter. - Charging
- Wireless Charging
Place both your phone, Apple Watch and earphone case on the wireless charger. Make sure they are well located in the charging area of the wireless charger.
- USB Output
Power your other devices with charging cables.
Note: Magnetic Charging Stand: Only support Magsafe cases or without cases. Wireless Charging Dock: Supports charging for cases less than 5 mm / 0.2 inch thick and without attachments (e.g. Keys, Credit Cards, Pop Sockets, Magnets or Metal).
- Wireless Charging
- Night Lamp
The night lamp supports 3-level of brightness adjustable by touch control, short single touch turn on the light, and then from neutral light, warm light and more warmer light and off 4 states cycled. The fourth press to turn off night lamp.
Product Specification
| Specification | Details |
|---|---|
| Model | YM-UD22 |
| Material | ABS+PC |
| Input Interface | Type-C |
| Input | 5V-2A |
| USB Output | PD/QC 3.0/ 9V-3A/12V-2.5A |
| Output 1 (for Apple Watch) | 3W |
| Output 2 (for other phones) | 5W |
| Output 3 (for earphones) | 5W |
| Conversion Efficiency | <80% |
| Transmission Distance | <5mm |
| Dimensions | 165125160mm |
| Magnetic wireless charging (iPhone 12/13) | 7.5W |
Applicable Devices
- Smart Phones:
- Apple: iPhone 13 Pro Max / 13 / 13 Pro / 13 mini / 12 Pro Max / 12 / 12 Pro / 12 mini / 11 Pro Max / 11 / 11 Pro / Xs Max / X / Xs / XR / 8 Plus / 8 / SE (2)
- Samsung: S21 Ultra / S21 Plus / S21 / S20 Ultra / S20 Plus / S20 / S10 Plus / S10 5G / S10e / S10 / S9 Plus / S9 / S8 Plus / S8 / S7 Edge / S7 / S6 Edge Plus / S6 Edge / S6 / Note 20 / Note 10 / Note 10 Plus / Note 9 / Note 8 / Note PE / Note 7 / Note 5 / W2016 / W2017 (SM-W2017) / Kelly (SM-W2018) / Galaxy S Lite (SM-G8750) / SM-G9298 / Galaxy Fold
- LG: G7 / G8 / V40 / V30
- Huawei: Mate 20 Pro / Mate 20 RS / Mate 30 / Mate 30 Pro / Mate 30 RS / P30 Pro / P40
- Xiaomi: MIX 2S / MIX 3 / Xiaomi9 / Xiaomi9 Pro 5G Other All Qi-enabled Phones
- Apple Watch:
Apple Watch Series 1 / 2 / 3 / 4 / 5 / 6 / 7 / SE - Earphone:
- Apple: AirPods 2 / 3 / Pro
- Samsung: Galaxy Buds / Buds+ / Buds Pro / Buds Live / Buds2
- Huawei: Freebuds 2 / 3 / 4 / Pro Other TWS earphones (with wireless charging case)
Product Contents
- 1 x 5 in 1 Wireless Charger
- 1 x Power Adapter
- 1 x USB Cable
- 1 x User Manual
Attention
- 1. Do not disassemble the product or change the actual use of the product
without authorization.
2. Keep away from water or other liquids which may lead to short circuit when
using the products.
3. Please use the product in the temperature range of -10℃ -45℃. Do not use
the product near the fire source or under sunlight.
4. For safety, please place the product away from children.
5. Please do not place magnetic cards, magnetic stripe media,and precision
machinery too close to the device. Not for the Otterbox Commuter case.
FCC Statement
FCC ID: 2A4N3-YM-UD22
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
[Contact Us] Customer Support
- Tel. +1 844-551-6688 (US)
- E-mail. support@techhys.com
- WhatsApp. +86 13129576396
- Facebook. @HYSservice
What devices are compatible with the EXW YM-UD22 5 in 1 Wireless Charging Station?
The EXW YM-UD22 5 in 1 Wireless Charging Station is compatible with iPhone models (16 Pro Max, 16, 15 Pro Max, 15, and earlier), Apple Watch Series 1-9, SE, Ultra, and AirPods 2/3, AirPods Pro/Pro 2, and other TWS earphones.
How does the EXW YM-UD22 5 in 1 Wireless Charging Station charge devices?
The EXW YM-UD22 5 in 1 Wireless Charging Station uses wireless charging technology. It features a magnetic charger for iPhones, Apple Watches, and AirPods, offering fast and efficient charging for all compatible devices.
What is the charging output of the EXW YM-UD22 for iPhones?
The EXW YM-UD22 provides up to 10W output for iPhones, ensuring fast charging for your Apple devices.
How long does it take to charge an iPhone with the EXW YM-UD22 5 in 1 Wireless Charging Station?
The EXW YM-UD22 can charge an iPhone up to 80% in about 1.5 hours, depending on the model and battery size.
What safety features are included with the EXW YM-UD22 5 in 1 Wireless Charging Station?
The EXW YM-UD22 includes several safety features, including over-current protection, overvoltage protection, short-circuit protection, and temperature control for safe charging.
What is the size of the EXW YM-UD22 5 in 1 Wireless Charging Station?
The EXW YM-UD22 has dimensions of 6.5 x 4.92 x 6.3 inches and weighs approximately 12.3 ounces.
How do I use the EXW YM-UD22 to charge my devices?
Simply place your iPhone, Apple Watch, and AirPods on their designated pads. Connect the EXW YM-UD22 to a power source using the included power adapter, and your devices will begin charging automatically.
What material is the EXW YM-UD22 5 in 1 Wireless Charging Station made from?
The EXW YM-UD22 is made from durable ABS plastic with cooling holes to ensure safe and efficient heat dissipation during charging.
Video-EXW YM-UD22 5-in-1 Wireless Charging Station
Download this Manual: EXW YM-UD22 5-in-1 Wireless Charging Station User Manual
