EXTECH TP200 Type K Pipe Clamp Temperature Probe
Operating instructions
- Using the Type K sub-miniature thermocouple connector, plug the TP200 in to a compatible Type K measuring instrument.
- Turn on the measuring instrument and select the appropriate range.
- Read the temperature on the measuring instrument When no heat or cold is applied to the thermocouple element, the measuring instrument should display the ambient (room) temperature.
- Squeeze the spring-loaded handles to open the clamp jaws.
- Securely clamp the probe jaws around the pipe to be measured.
- Read the temperature.
Note: For best results, the surface area should be free of any dirt or substance that will inhibit thermal contact.
Specifications
- Temperature Range
-20 to 93°C (-4 to 200°F) - Sensor Type
Type K curved thermocouple element - Accuracy
+/-1.8°C (3.6°F) - Pipe size
0.25″ (6.35mm) to 1.5″ (38mm) diameter - Cable length
36″ (0.9m)
Copyright 2022 FLIR Systems Inc.
All rights reserved including the right of reproduction in whole or in part in any form IsO-9001 Certified
www.extech.com
Documents / Resources
 |
EXTECH TP200 Type K Pipe Clamp Temperature Probe [pdf] User Manual TP200 Type K Pipe Clamp Temperature Probe, TP200, Type K Pipe Clamp Temperature Probe |
