Motion Sensor Ceiling Light
User Manual
Ceiling Light Instructions
▶ In order to use the lamp correctly, please read this manual carefully before installation
Basic parameters
| Product name: LED Ceiling Light | Wattage: 18W |
| Voltage range: AC85-265V 50/60Hz | Color temperature: 6000K/4000K/3000K |
| Lumen:1600LM | Sensing range: 360° |
| Lamp bead type: SMD2835 | Sensing distance: up to 6m/20ft |
| Protection class: IP44 | Material: PC |
| CRI:85 | Dimensions:∅230*25mm |
Function Description
A: Three Color Temperature Adjustment
▶ The color temperature of this LED ceiling light can be adjusted through the wallswitch between 6000K (Cold White ) /A000K (Day Light) / 3000K (Warm White ).
B: Motion Sensor
▶ Warm Tips:Before installing the fixture, use an accessory screwdriver to adjust the sensing mode you need.
▶ ON/OFF: You can turn on or off the sensing function according to the actual situation.
▶ TIME: Automatically turns on when approaching. The delay time can be set to 30S or 120S. The maximum sensing distance is 6m/20ft. When the motion sensing i & function is turned off, it can be used as a normal ceiling light.
▶ MODE: In the “SUN” position, It can be lit day and night; in the “moon” position, it can only be lit at night. 
C:Memory Function ONS
▶ The light needs to be switched off for more than 7 seconds and the memory function is effective when the light is switched on again.
Installation Guide
Method 1: Ceiling installation
▶ Step 1: Take out the bracket and screws, use the screws to fix the bracket on the wall
▶ Step 2: Connect the power cord according to the indication of N/L on the wire (please cut off the power first to avoid electric shock in this step)
▶ Step 3: align the lamp with the hole on the bracket, follow the direction of the arrow to rotate the lamp,until the lamp and bracket are firmly connected
▶ Step 4: After installation, turn on the power and check whether the fixture can be used normally.
Method 2: Recessed installation
▶ Step 1: Take out the snap and bracket, fix the snap on the bracket according to the actual hole size
▶ Step 2: Align the bracket with the Installation hole on the back of the fixture, and fix the installation bracket
▶ Step 3: Rotate the mounting bracket In the direction indicated by the arrow until the bracket Is fixed
▶ Step 4: Remove the two springs and insert them into the clips on
▶ Step 5: According to the instructions of N/L on the power cord, link the power cord (this step please cut off the power first, to avoid electric shock)
▶ Step 6: Embed the fixture into the reserved hole, the size of the nole can be agjusted flexibly trom φ50-200mm.
Accessory List
| Plastic screws X2 | Spring piece X2 |
| Screw X2 | Mounting bracket X1 |
| Snap X2 | Screwdriver X1 |
After Sales
▶ We are committed to providing customers with better products and better shopping experience.
▶ Each product is delivered after factory test to ensure product quality.Our products are guaranteed for 2 years.
▶ If you have any questions about our products, please feel free to contact us on our shop!
▶ Manufacturer:Shenzhen Lanbote Technology Co., Ltd.
▶ Add:213, bldg. B, 1970 Cultural Innovation Park, Minzhi Community, Longhua District, Shenzhen, CN
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CF15 7QR
contact@evatmaster.com
Documents / Resources
 |
evatmaster B07JQD3JZ3 Motion Sensor LED Ceiling Light [pdf] User Manual B07JQD3JZ3 Motion Sensor LED Ceiling Light, B07JQD3JZ3, Motion Sensor LED Ceiling Light, Sensor LED Ceiling Light, LED Ceiling Light, Ceiling Light, Light |