T8 Series NVR Security System
Specifications
- Model: T8N00, T8E00, T8P00, T8P10
- Network Video Recorder S4 with pre-installed 2TB hard
drive - Various types and numbers of cameras depending on the bundle
package
Product Usage Instructions
1. Getting Started
Connect the NVR Security System:
- Connect NVR to Your Router.
- Connect Mouse and Monitor to NVR.
- Connect Cameras to NVR.
- Connect to Power Supply. Ensure proper ventilation around the
NVR.
2. Set Up NVR Access
Option A – Set Up with Your Monitor/TV:
- Connect NVR to your monitor or TV.
Option B – Connect NVR to the eufy App:
- Download the eufy App.
- Follow in-app instructions to complete setup.
- Add NVR by scanning the QR code and sync it.
3. Mount the Cameras
Refer to the specific pages for mounting instructions for each
type of camera:
- PoE Cam S4 – Page 16
- PoE Cam E41 – Page 28
- PoE Cam E40 – Page 41
FAQ
Q: What tools/devices are required for installation?
A: You will need a Phillips screwdriver, power drill, hammer,
ladder, monitor/TV, and router.
Q: What should I do if any item is missing from the box?
A: If anything is missing, please contact support@eufy.com for
assistance.
Anker Innovations Limited. All rights reserved, registered in the United States and other countries.
NVR Security System
Quick Start Guide
Model: T8N00, T8E00, T8P00, T8P10 51005005531_V5
Video/User Guide/Support
LAN
The type and number of cameras vary by bundle package.
What’s in the Box
Make sure everything is included. Anything missing? Please contact support@eufy.com. For NVR Installation
LAN
Network Video Recorder S4 (with pre-installed 2TB hard
drive)
Power Adapter
HDMI Cable
1m Ethernet Cable
USB Mouse
For PoE Cam S4 Installation
PoE Cam S4 Positioning Sticker Screw Pack
Mounting Bracket
18m Ethernet Cable Waterproof Cover Pack
01
For PoE Cam E41 Installation
PoE Cam E41 Positioning Sticker Screw Pack
Mounting Bracket
18m Ethernet Cable Waterproof Cover Pack
For PoE Cam E40 Installation
PoE Cam E40
Positioning Sticker
Screw Pack
18m Ethernet Cable
Waterproof Cover Pack
Tools/Devices You will Need
Phillips Screwdriver Power Drill
13/16″ (20.6 mm) & 1/4″ (6.3 mm)
Hammer
02
Ladder
Monitor/TV
Router
At a Glance
NVR
Front Hard Drive LED Network LED Power LED QR Code
Back SYNC Button Reset Hole Power Port Audio Output Port USB-C Port USB-A Port HDMI Port LAN Port PoE Ports Grounding Screw
HDD
LAN
POWER
DCIN AUDIO OUT TYPE-C
USB
HDMI
LAN
PoE1
PoE2
PoE3
PoE4
PoE5
PoE6
PoE7
PoE8
SYNC
03
PoE Cam S4
Mounting Base // Spotlight // Camera Lens LED Indicator / Microphone Warning Light Speaker / Spring Screw SD Card Slot SYNC/Reset Button Fusion Link Port DC Connector PoE Connector
04
SYNC
PoE Cam E41
Mounting Base Microphone Camera Lens Spotlight LED Indicator Speaker Warning Light Cable Notch SYNC/Reset Button SD Card Slot Fusion Link Port PoE Connector DC Connector
10 ¡
05
PoE Cam E40
Microphone Camera Lens Spotlight LED Indicator Warning Light SYNC/Reset Button SD Card Slot Fusion Link Port Camera Bottom Screw Angle Adjustment Knob Bracket Bottom Screw Cable Notch Mounting Bracket PoE Connector DC Connector
Speaker
06
SYNC
Getting Started
1 Connect the NVR Security System
Connect NVR to Your Router
DCIN AUDIO OUT TYPE-C
USB
HDMI
LAN
PoE1
PoE2
PoE3
PoE4
PoE5
PoE6
PoE7
PoE8
SYNC
07
Connect Mouse and Monitor to NVR
DCIN AUDIO OUT TYPE-C
USB
HDMI
LAN
PoE1
PoE2
PoE3
PoE4
PoE5
PoE6
PoE7
PoE8
SYNC
DCIN AUDIO OUT TYPE-C
USB
HDMI
LAN
PoE1
PoE2
PoE3
PoE4
PoE5
PoE6
PoE7
PoE8
SYNC
Connect Cameras to NVR
DCIN AUDIO OUT TYPE-C
USB
HDMI
LAN
PoE1
PoE2
PoE3
PoE4
PoE5
PoE6
PoE7
PoE8
SYNC
08
09
Connect to Power Supply
Please leave a minimum clearance of 20 mm (0.78″) on the left and right sides of the NVR for proper ventilation.
DCIN AUDIO OUT TYPE-C
USB
HDMI
LAN
PoE1
PoE2
PoE3
PoE4
PoE5
PoE6
PoE7
PoE8
SYNC
2 Set Up NVR Access
Option A – Set Up with Your Monitor/TV
LAN
10
11
Option B – Connect NVR to the eufy App
Download the eufy App 12
eufy
Follow in-app instructions to complete setup.
Add NVR
LAN
Scan QR Code
LAN
Sync NVR
Pair 13
3 Mount the Cameras
PoE Cam S4
Page 16
PoE Cam E41
Page 28
PoE Cam E40
Page 41
14
15
Mounting PoE Cam S4 Step 1. Get Items Ready
For PoE Cam S4 Installation
Step 2. Choose a Location
Recommended Location: · Height of 2 m to 3 m (7 ft to 10 ft) · 20 m (65ft) Field of View (for Telephoto Lens) · On the Ceiling or on a Wall
PoE Cam S4 Positioning Sticker Screw Pack
Mounting Bracket
18m Ethernet Cable Waterproof Cover Pack
Tools/Devices You will Need
Phillips Screwdriver Power Drill
13/16″ (20.6 mm) & 1/4″ (6.3 mm)
Hammer
Ladder
16
2-3 M (7 to 10 )
20 M (65 )
17
On the Ceiling 18
On the Wall
Step 3. Drill Cable Hole
13/16″ (20.6 mm)
Position
13/16″ (20.6 mm)
Drill Holes 19
Step 4. Drill Screw Holes
1/4″ (6.3 mm)
20
Step 5. Insert Anchors
Skip for Wooden Walls
21
Step 6. Install the Mounting Bracket
This bracket can be installed either way –just attach the side with 3 holes to the wall/ceiling.
Step 7. Mount the Camera
22
Ceiling Mounting
Wall Mounting
Insert the Camera
Lock the Spring Screws
23
Step 8. Connect Camera to the NVR
Connect the camera with the Ethernet cable. Ensure the Ethernet cable is connected to the NVR.
LAN
Click
24
If the cable connector is exposed outside…
Route the cable through the cable notch. Ensure the connector is positioned downward to prevent water intrusion. Install the waterproof cover and connect the camera with the Ethernet cable (next page). Ensure the Ethernet cable is connected to the NVR.
25
Waterproofing Cable Connectors
Ensure A is pre-installed on the PoE connector of the camera. Route the Ethernet cable through these components in order: B, C, and D. Plug the Ethernet cable into the camera PoE connector. Attach D with the camera PoE connector, and twist to lock. Insert C into D, and rotate B to secure it to D.
Click
A
D
CB
The shape of the waterproof cover and the connector may vary slightly. 26
Step 9. Adjust the Camera Field of View
30°
B
180°
20°-90°
C
Remove the Protective Film
D
E
· Rotate the Camera to the Optimal Angle · Check the Live Stream in the App
27
Mounting PoE Cam E41 Step 1. Get Items Ready
For PoE Cam E41 Installation
Step 2. Choose a Location
Recommended Location: · Height of 2 m to 3 m (7 ft to 10 ft) · 12 m (39 ft) Field of View · On the Ceiling or on a Wall
PoE Cam E41 Positioning Sticker Screw Pack
Mounting Bracket
18m Ethernet Cable Waterproof Cover Pack
Tools/Devices You will Need
Phillips Screwdriver Power Drill
13/16″ (20.6 mm) & 1/4″ (6.3 mm)
Hammer
Ladder
28
2-3 M (7 to 10 )
12 m (39 )
29
On the Ceiling 30
On the Wall
CABLE TRAY CABLE TRAY CABLE TRAY
Step 3. Drill Cable Hole
13/16″ (20.6 mm)
PoE Cable Hole
PoE Cable Hole
B
Determine Cable Direction
C
Position
PoE Cable Hole
13/16″ (20.6 mm)
Drill Holes 31
Step 4. Drill Screw Holes
1/4″ (6.3 mm)
PoE Cable Hole
32
CABLE TRAY
Step 5. Insert Anchors
Skip for Wooden Walls
33
Step 6. Install the Mounting Bracket
Route cable through this notch.
Step 7. Mount the Camera Ceiling Mounting
On the Ceiling 34
On the Wall
Ensure the camera is ALWAYS positioned upright with the ‘UP’ mark facing upward; otherwise, the live stream image will appear upside down.
35
Wall Mounting
Step 8. Connect Camera to the NVR
Connect the camera with the Ethernet cable. Ensure the Ethernet cable is connected to the NVR.
LAN
Ensure the camera is ALWAYS positioned upright with the ‘UP’ mark facing upward; otherwise, the live stream image will appear upside down.
36
Click
37
If the cable connector is exposed outside…
Route the cable through the cable notch. Ensure the connector is positioned downward to prevent water intrusion. Install the waterproof cover and connect the camera with the Ethernet cable (next page). Ensure the Ethernet cable is connected to the NVR.
38
Waterproofing Cable Connectors
Ensure A is pre-installed on the PoE connector of the camera. Route the Ethernet cable through these components in order: B, C, and D. Plug the Ethernet cable into the camera PoE connector. Attach D with the camera PoE connector, and twist to lock. Insert C into D, and rotate B to secure it to D.
Click
A
D
CB
The shape of the waterproof cover and the connector may vary slightly. 39
Step 9. Adjust the Camera Field of View
Remove the Protective Film 40
360°
360° · Rotate the Camera to the Optimal Angle · Check the Live Stream in the App
Mounting PoE Cam E40 Step 1. Get Items Ready
For PoE Cam E40 Installation
PoE Cam E40
Positioning Sticker
Screw Pack
18m Ethernet Cable
Waterproof Cover Pack
Tools/Devices You will Need
Phillips Screwdriver Power Drill
13/16″ (20.6 mm) & 1/4″ (6.3 mm)
Hammer
Ladder
41
Step 2. Choose a Location
Recommended Location: · Height of 2 m to 3 m (7 ft to 10 ft) · 12 m (39 ft) Field of View · On the Ceiling or on a Wall
2-3 M (7 to 10 )
12 m (39 )
42
On the Ceiling
On the Wall 43
Step 3. Drill Cable Hole
PoE Cable Hole
13/16″ (20.6 mm)
Step 4. Drill Screw Holes
PoE Cable Hole
1/4″ (6.3 mm)
PoE Cable Hole
PoE Cable Hole
PoE Cable Hole
13/16″ (20.6 mm)
PoE Cable Hole
B
C
Determine Cable Direction
Position
Drill Holes
44
45
Step 5. Insert Anchors
Step 6. Mount the Camera
PoE Cable Hole
46
PoE Cable Hole
Skip for Wooden Walls
On the Ceiling
On the Wall 47
Step 7. Connect Camera to the NVR
Connect the camera with the Ethernet cable. Ensure the Ethernet cable is connected to the NVR.
LAN
Click
48
If the cable connector is exposed outside…
Route the cable through the cable notch. Ensure the connector is positioned downward to prevent water intrusion. Install the waterproof cover and connect the camera with the Ethernet cable (next page). Ensure the Ethernet cable is connected to the NVR.
49
Waterproofing Cable Connectors
Ensure A is pre-installed on the PoE connector of the camera. Route the Ethernet cable through these components in order: B, C, and D. Plug the Ethernet cable into the camera PoE connector. Attach D with the camera PoE connector, and twist to lock. Insert C into D, and rotate B to secure it to D.
Click
A
D
CB
The shape of the waterproof cover and the connector may vary slightly. 50
Step 8. Adjust the Camera Field of View
360°
360°
Remove the Protective Film
B
C
D
· Adjust the Knob or Screws to Get an Optimal Angle · Check the Live Stream in the App
51
Congratulations!
Now you’re all set to use your NVR security system!
52
Important Safety Instructions
· The recommended temperature range for T8P00, T8P10, and their accessories is -30°C to 50°C (-22°F to 122°F).
· The recommended temperature range for T8E00 and their accessories is -30°C to 45°C (-22°F to 113°F).
· The recommended temperature range for T8N00 and accessories is -10°C to 40°C (14°F to 104°F).
· Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use the devices in an environment that exceeds the recommended low or high temperature.
· Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your devices to direct sunshine or excessively wet environments.
· Do not use the product in any way other than described herein in order to avoid personal injury or property damage.
· Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators’ legal liability under any circumstances.
· For pluggable equipment, the socket outlet should be easily accessible.
· Use only the adapters provided by the manufacturer. Using unauthorized adapters may cause danger and violate the Terms of Use and warranty article.
53
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
54
The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 10800 NE 8TH ST #900, BELLEVUE, WA, 98004, UNITED STATES Telephone: 1-800-988-7973 IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
55
Warranty
a) Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
b) Even used batteries may cause severe injury or death.
c) Call a local poison control center for treatment information.
d) The compatible battery type CR2032 3V.
e) Non-rechargeable batteries are not to be recharged.
f) Do not force discharge, recharge, disassemble, heat above 45°C (113°F) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
g) The product contains non-replaceable battery.
Type
Warranty Period
Network Video Recorder
36 Months
PoE Camera
36 Months
Hard Disk Drive / Mounting Bracket
24 Months
Power Adapter
AC Cable / USB Mouse / Ethernet Cable / HDMI Cable / Waterproof Cover Pack
Other Accessories
18 Months 12 Months No Warranty
For more information about the warranty policy, please visit https://www.eufy.com/policies/refund-policy?ref=navimenu_10_1_2_copy.
56
57
Customer Service
(US/Canada) +1 (800) 988 7973
support@eufy.com support.au.eufy.com (AU)
Australian and New Zealand customers, please scan the QR code for the warranty information.
Anker Innovations Limited Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
Documents / Resources
 |
eufy T8 Series NVR Security System [pdf] User Guide T8N00, T8E00, T8P00, T8P10, T8 Series NVR Security System, T8 Series, NVR Security System, Security System, System |