EtherWAN EasyCell Hardened 4G LTE CAT4 Router

Before you begin

• Please contact your preferred wireless carrier and obtain your SIM card by providing the IMEI number marked on the side of the box or bottom of your EasyCell.
• For your convenience, EasyCell is also shipped with an oracom® SIM card (www.soracom.io/us) that can be activated with your credit card to go online right away

FRONT VIEW

BACK VIEW

USING

1. Push the SIM holder button with the needle and pull the SIM holder out.
2. Insert your SIM card into the SIM holder and slide back into your EasyCell.
   • Make sure the SIM card is completely flush with the SIM holder
3. Attach both main and aux cellular antennas to the connectors marked “Mobile” and WiFi antenna to the connector labeled “WiFi”.
4. Plug in the power adapter connect your PC to the LAN port with an ethernet cable and wait for startup completion (approx. 90 seconds)
5. Open your browser and type the default IP (192.168.1.1) address for the EasyCell Web UI login page.
6. Enter the USERNAME and PASSWORD marked on the bottom label of EasyCell
7. Set a new password (you will need this later to register your EasyCell on HexaCloud)
8. Setup Wizard will guide you with General, LAN, Mobile, Wireless, and HexaCloud settings.
9. Create a free cloud remote management account and register your EasyCell at www.etherwanhexacloud.com.
10. Create and enter your device name, serial number, LAN MAC address, and new PASSWORD you created, and click on “SUBMIT” now you have completed the installation and cloud management setup for your EasyCell.
    • Technical & Sales Support: 714-779-3800

Documents / Resources

EtherWAN EasyCell Hardened 4G LTE CAT4 Router [pdf] Installation Guide EasyCell Hardened 4G LTE CAT4 Router, EasyCell, Hardened 4G LTE CAT4 Router, 4G LTE CAT4 Router, CAT4 Router, Router

References

• User Manual