Yealink DECT IP Phone W76P

Package Contents

The Yealink W76P DECT IP phone package includes:

W56H Handset
W70B Base Station
2 Power Adapters
Base Stand
Ethernet Cable
Battery Cover
Rechargeable Battery
Belt Clip
USB Charging Cradle
Quick Start Guide
Handset Protective Case (Optional)

Note: The Yealink W76P DECT IP phone consists of one W70B base station and one W56H handset.

Assembling the DECT Phone

Connect the base station power and the network using method a or method b:
- a. AC Power Option: Connect the power adapter to the base station and a power outlet.
- b. PoE (Power over Ethernet) Option: Connect the base station to an IEEE 802.3af compliant PoE Hub/Switch using an Ethernet cable.
Note: If using method a, use the Yealink supplied power adapter (5V/0.6A). A third-party power adapter may damage the base station. If using method b, ensure the hub/switch is PoE-compliant.
Desktop Installation: Attach and remove the base stand.
- Attach: Align the snap-fits with the corresponding holes and push forward, snapping them into the holes.
- Remove: Remove the snap-fits from the holes horizontally.
Wall-Mount Installation: Attach the base station to the wall. Ensure a 59mm spacing for mounting.
Insert the battery into the handset.
Attach the belt clip to the handset.
Optional: Mount the charging cradle to the wall. Ensure a 36mm spacing for mounting.
Connect the charging cradle and charge the handset.

Note: Use the Yealink-supplied power adapter (5V/0.6A). A third-party power adapter may damage the handset. Check the charging status on the top-right corner of the LCD screen.

Hardware Component Instructions

The handset includes the following components:

1. Receiver: For listening during calls.
2. Power LED Indicator: Indicates the power status of the handset.
3. Phone Screen: Displays information and menus.
4. Soft Keys: Context-sensitive keys below the screen.
5. Message Key: Accesses voicemail messages.
6. Speakerphone Key: Activates the speakerphone.
7. Navigation Keys: Used for navigating menus and options.
8. OK Key: Confirms selections.
9. On-hook Key/Power Key: Ends calls or powers the device on/off.
10. Off-hook Key: Initiates or answers calls.
11. Keypad: For dialing numbers and entering information.
12. TRAN Key: Used for transferring calls.
13. Mute Key: Mutes or unmutes the microphone.
14. Microphone: For speaking during calls.

Regulatory Notices

Operating Ambient Temperatures

Operating temperature: +14 to 122°F (-10 to 50°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +158°F (-30 to +70°C)

Warranty

Yealink's product warranty is limited to the unit itself when used normally according to operating instructions. Yealink is not liable for damage or loss resulting from product use, or for claims from third parties, or for problems arising from the use of this product, financial damages, lost profits, or claims from third parties.

Explanation of the symbols

DC symbol: Indicates the DC voltage.
WEEE Warning symbol: Indicates that WEEE should not be disposed of as unsorted municipal waste and must be collected separately.

Restriction of Hazardous Substances Directive (RoHS)

This device complies with the EU RoHS Directive. Statements of compliance can be obtained by contacting support@yealink.com.

Safety Instructions

General Requirements

Keep the device dry and clean, avoid collision and crash during storage, transportation, and operation.
Do not attempt to dismantle the device yourself. Contact an appointed maintenance center for repair.
Respect relevant laws and statutes, and the legal rights of others.

Environmental Requirements

Place the device in a well-ventilated area, away from direct sunlight.
Keep the device dry and free of dust.
Do not place the device on or near inflammable or fire-vulnerable objects.
Keep the device away from heat sources like candles or electric heaters.

Operating Requirements

Do not let children operate the device without guidance.
Do not let children play with the device or accessories, to prevent accidental swallowing.
Use only accessories provided or authorized by Yealink.
Ensure the power supply meets the device's input voltage requirements. Use the provided surge protection power socket.
Ensure hands are completely dry before plugging or unplugging any cable.
Do not spill liquids on the product or use it near water (e.g., bathtub, sink, wet basement, swimming pool).
During thunderstorms, stop using the device, disconnect it from the power supply, unplug the power plug and the ADSL twisted pair (radio frequency cable) to avoid lightning strikes.
If the device is left unused for a long time, disconnect it from the power supply and unplug the power plug.
If smoke, abnormal noise, or smell is emitted from the device, disconnect it from the power supply and unplug the power plug immediately.
Do not insert objects into equipment slots that are not part of the product or auxiliary product.
Connect the grounding cable first before connecting any other cable. Do not disconnect the grounding cable until all other cables are disconnected.

Battery Requirements

Do not immerse the battery in water, as it could short-circuit and damage the battery.
Do not expose the battery to open flames or extremely high temperatures, which could cause it to explode.
Power off the handset before removing the battery.
Do not use the battery for any device other than this handset.
Do not open or mutilate the battery; the released electrolyte is corrosive and may cause damage to eyes or skin.
Use only the rechargeable battery pack delivered with the handset or those expressly recommended by Yealink.
Defective or exhausted batteries should not be disposed of as municipal waste. Return old batteries to the battery supplier, a licensed battery dealer, or a designated collection facility.

Cleaning Requirements

Disconnect the device from the power supply before cleaning.
Use a piece of soft, dry, and anti-static cloth to clean the device.
Keep the power plug clean and dry.

Troubleshooting

The unit cannot supply power to Yealink device.
- There is a bad connection with the plug. Clean the plug with a dry cloth and connect it to another wall outlet.
- The usage environment is out of the operating temperature range. Use the device within the operating temperature range.
- The cable between the unit and the Yealink device is connected incorrectly. Connect the cable correctly.
- You cannot connect the cable properly. Ensure you are using the correct Yealink device and power supply. Clean any dust from the port.
Contact your dealer or authorized service facility for further questions.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Statement

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage; (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. NMB-3(B)

Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Cet émetteur ne doit pas être co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.

Contact Information

YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No. 16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands

YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Made in China

About Yealink

Yealink (Stock Code: 300628) is a global brand specializing in video conferencing, voice communications, and collaboration solutions with best-in-class quality, innovative technology, and user-friendly experience. Yealink ranks No.1 in the global market share of SIP phone shipments.

Technical Support

Visit Yealink WIKI (https://support.yealink.com/) for firmware downloads, product documents, FAQ, and more. For better service, use the Yealink Ticketing system (https://ticket.yealink.com) to submit technical issues.

	Yealink W76P DECT IP Phone Quick Start Guide Comprehensive quick start guide for the Yealink W76P DECT IP Phone, detailing package contents, assembly instructions, hardware components, safety regulations, and troubleshooting tips.
	Yealink W76P DECT IP Phone Quick Start Guide This guide provides essential information for setting up and using the Yealink W76P DECT IP Phone. It covers package contents, assembly instructions for the base station and handset, hardware component identification, and important regulatory and safety notices.
	Yealink W76P DECT IP Phone Quick Start Guide A quick start guide for the Yealink W76P DECT IP Phone, detailing package contents, assembly instructions, hardware component identification, safety guidelines, regulatory information, and troubleshooting tips.
	Yealink W76P DECT IP Phone Quick Start Guide Comprehensive guide for setting up and using the Yealink W76P DECT IP Phone, including package contents, assembly instructions, hardware component details, regulatory information, safety guidelines, and troubleshooting tips.
	Yealink W79P DECT IP Phone Quick Start Guide This guide provides instructions for assembling and setting up the Yealink W79P DECT IP Phone, including package contents, assembly steps, and technical specifications.
	Yealink DECT IP Phone (W76P) Setup Guide Step-by-step instructions for setting up the Yealink DECT IP Phone (W76P), including assembling the handset and base, retrieving login credentials, registering the device, and provisioning.
	Yealink W70B Quick Start Guide A concise guide to setting up and using the Yealink W70B DECT cordless phone system, including the base station, 4G router, and handsets.
	Yealink W70B DECT IP Base Station Quick Start Guide This document provides a quick start guide for the Yealink W70B DECT IP Base Station, covering package contents, assembly instructions for desktop and wall-mount installations, and important safety and regulatory information.