RETRO-Fusion™ 2.0 500

Energy Efficient LED Light Engine

Designed to retrofit directly into existing fixtures.

The RETRO-Fusion™ 2.0 is a TUV listed retrofit kit that rapidly transforms existing inefficient incandescent fixtures into energy efficient LED fixtures. CantoUSA's patented technology allows the fixture to smoothly dim from 0-100% utilizing existing dimming technology. Retrofit kits are available with a variety of options for both recessed and pendant style fixtures. Installation is as easy as changing a light bulb. The LED technology creates even fields and delivers consistent color. The RETRO-Fusion™ 2.0 500 delivers more light than most 500 watt incandescent bulbs it replaces with only a 49 watt load.

What the Fusion 2.0 IS

• More cost effective than fixture replacement
• Large lumen output for this market
• Listed for screw-in replacement
• Field swappable bases
• Serviceable safety cable
• Dims on existing dimming systems with no additional installation or control system
• 0-100% dimming without flicker, pulse, or stepping
• 80+ High CRI

Electrical Data

• 49 Watts (49.07)
• Power Factor (PF): .9955
• Lumens: 5676 @ 2700K
• Lumens per watt: 115.67
• LM 70: >50,000 Hours
• CRI@2700K: 82, R9+4.9
• 1 lb 12.9 oz - 15.1 w/Reflector (.820-.905 kg)

Applications

• 9 feet to 50 feet high ceilings (2.75-15.25 meter high ceilings)
• Where dimming is a key concern
• Where there is no desire or budget to replace existing fixtures
• Where access is limited
• Where a custom solution is required
• Where the ceiling cannot be disturbed

Typical Installations

• Auditoriums
• Churches and houses of worship
• Arenas
• Lobbies
• Museums
• Educational facilities
• Convention centers

Base Types

Fixture Lenses

• Tall 15 Degrees
• Tall 23 Degrees
• Tall 46 Degrees
• Short 26 Degree
• Short 40 Degree
• Short 59 Degree
• Short 70 Degree
• None 120 Degrees

Color Temp

• 2700K - Standard
• 3000K - Standard
• 3500K
• 4000K
• 5000K

Fixture Drawing

Short Fixture:

A diagram shows a short LED engine with dimensions. Key features include a safety cable and an E26 base. The weight is 1lb 12.9oz w/Reflector (.820 kg w/Reflector).

Tall Fixture:

A diagram shows a tall LED engine with dimensions. Key features include a safety cable and an E39 base. The weight is 1lb 15.1oz w/Reflector (.905 kg w/Reflector).

Order Guide

The order guide provides options for configuring the RETRO-Fusion 2.0:

1. RETRO: Select Light (F2), Voltage (120, 230, 500), Fixture Type (500), Sink Size (X Standard), Color Temp (2.7K, 3.0K, 3.5K, 4.0K, 5.0K), CRI (80, *90, *95, *97). Note: CRI > 80 adds 6 weeks to delivery.
2. TOPS: Select Top (E26, E11, BW (Bare Wire)), Type (S Short, T Tall), Length (1.35" or *CCC, 1.75", 2.75", 4.00" or *CCC, 12" min, increase in 6" increments). Custom height in inches to the nearest 1/4" from the top of the plate to the tip.
3. REFLECTOR: Select Reflector (REF), Degree (15, 23, 46, 26, 40, 59, 70, 25), Size (T, S, Z).
4. ADAPTER & EXTENDER OPTIONS: Select Type (ADP, EXT). Note: E39 and BA15D require E26 base with adapters.
5. DIFFUSERS: Select Diffuser (DIF), Type (SMALL for Shorts, LARGE for Talls, KIT for Shorts and Talls).

Photometrics (R500) 3,000K

This section provides detailed photometric data for various beam angles (15°, 23°, 46°, 120°, 26°, 40°, 59°, 70°). It includes peak output in footcandles (fc) and multiplication factors for different distances and diameters to calculate light levels and area coverage. A note explains how to use multiplication factors for color temperature conversion.

Multiplication Factor for Color Temperature:

• To convert to 2,700 Kelvin - fc X .9488
• To convert to 3,500 Kelvin - fc X 1.0196
• To convert to 4,000 Kelvin - fc X 1.0439
• To convert to 5,000 Kelvin - fc X 1.0617

To Solve Footcandles Over A Distance: Peak Output ÷ (Distance X Distance)

To Solve Area Over A Distance: Diameter X Mult.Factor

Detailed charts show foot-candle levels at various distances for each degree of beam spread.