INSTALLATION GUIDE
Installation
Installation must be carried out in deenergized condition by an electricial
Technical data
* 8 – 12 V ~ (AC 5 mA – 1,5 A)
* 8 – 12 V = (DC 5 mA – 1,0 A)
* Nur Schutzkleinspannung! Protect. low volt. only!
* Leiter/Wire 0,6 – 0,8 mm
* -20°C…60°C
* IP41
* Druckkraft/Op. force ca. 6 N
Grothe GmbH
Löhestraße 22
53773 Hennef
service@grothe.de
Specifications
- Product Name: Klingeltaster / Push button Combifix
- Model Number: MV 510130 11/24
- Input Voltage: 8-12V~
- Installation: Must be carried out in deenergized condition by an electrician
Product Usage Instructions
Installation
Ensure that the installation is performed by a qualified electrician in a deenergized condition. Follow the steps below:
- Secure the push button with a wall fixation at a distance of 32mm.
- If combining several push buttons, follow the specified guidelines for alignment.
- To remove, eliminate 2 ribs in the base of the unit.
- For LED options, refer to the manual for specific instructions.
- Ensure proper transformer connection as per SELV standards (Norm EN61558-2-6/-2-8).
Technical Data
Model Number: MV 510130 11/24
FAQ
Q: Can I install the Klingeltaster without professional help?
A: No, the installation must be carried out by a qualified electrician in a deenergized state for safety purposes.
Q: What is the input voltage requirement for this product? A: The input voltage required is 8-12V~.
Documents / Resources
 |
EROTHE MV 510130 Push Button Combifix [pdf] Installation Guide 51014, MV 510130, MV 510130 Push Button Combifix, MV 510130, Push Button Combifix, Button Combifix |
