ERM TagLINK Combo Combines Both Bridge and Gateway Owner's Manual

Ensure proper cellular network coverage for optimal communication.
Configure the device settings for output logic programming as needed for signal generation.

Utilize the vehicle battery diagnostics feature to monitor charge, voltage, and battery life.
Activate the immobilization system when necessary for security purposes.

Connect to a Wi-Fi hotspot using the Wi-Fi Client feature for additional connectivity options.
Use the dedicated single wire com port for adding on accessories or additional functionalities.

PRODUCT DESCRIPTION

Harnessing the Power of Proximity: Effortless Data Collection

TagLINK Combo combines both Bridge and Gateway functions in one compact solution for Wiliot® Pixel applications offering all in one.

Using advanced RF technology and Bluetooth® Low Energy (BLE), it activates Wiliot® Pixels and transmits their data directly to the cloud via cellular or Wi-Fi, ensuring real-time visibility.

The TagLINK Combo can run on external power or internal batteries and offers versatile mounting options—Cargo safety belt, wall, ceiling, or table stand—for easy deployment in various environments.

FEATURE

Near 360 Degrees Energizing Capabilities
12/24V Input Power / USB-C

4G cellular communication / WiFi
Designed for Both Automotive and InDoor Use

Works With Wiliot© Pixels
Internal 5/15 Amp battery for mobile operation

CONNECTING

Global cellular module (4G/3G/2G)

The device can be equipped with a Wi-Fi Client capable of connecting to an external Wi-Fi hotspot.

The device features a Bluetooth® Low Energy communication module, enabling data transmission between the device and Wiliot Pixel Tags and any additional Gateway.

TECHNICAL SPECIFICATIONS

ENVIRONMENT

Operating Temperature	-40 to 75° C
Storage Temperature	-45 to 85° C
Dimensions	10cm x 14.6cm x 3.5cm
Weight (NET)	400g
Durability	IP67 Vibration Resistance
Max. Relative Humidity	90(±2)%

FCC warning statements

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Email: info@ermtelematics.com

Tel: +972-3-9413313
Fax: +972-3-9413316

ERM Electronic Systems LTD
16 Hasar Shapira St. Rishon Lezion, Israel www.ermtelematics.com

FAQs

How do I know if the device is properly connected to the cellular network?

Check the device status indicators for network signal strength and communication status.

Can I use the device with a vehicle that has different protocols such as OBD2 or CANBUS?

Yes, the device supports various protocols including OBD2, CANBUS, J1908, and J1708 for compatibility with different vehicles.

Is it possible to customize the output signals generated by the device?

Yes, you can program complex output signals using the Output Logic Programming feature for customization.

Documents / Resources

ERM TagLINK Combo Combines Both Bridge and Gateway [pdf] Owner's Manual
2AXZU-TAGLINK, 2AXZUTAGLINK, TagLINK Combo Combines Both Bridge and Gateway, TagLINK Combo, Combines Both Bridge and Gateway, Both Bridge and Gateway, Bridge and Gateway, Gateway

References

User Manual

ERM TagLINK Combo Combines Both Bridge and Gateway

Product Information

Product Usage Instructions