ERMAdvanced Telematics
Email: info@ermtelematics.com
Tel: +972-3-9413313
Fax: +972-3-9413316
ERM Electronic Systems LTD
16 Hasar Shapira St. Rishon Lezion, Israel
www.ermtelematics.com

TagLINK Combo

Harnessing the Power of Proximity: Effortless Data Collection

The TagLINK Combo is a compact, all-in-one solution that combines Bridge and Gateway functions for Wiliot® Pixel applications. It leverages advanced RF technology and Bluetooth® Low Energy (BLE) to activate Wiliot® Pixels and transmit their data directly to the cloud via cellular or Wi-Fi, ensuring real-time visibility. The device offers flexible power options, running on external power or internal batteries, and features versatile mounting capabilities such as a cargo safety belt, wall, ceiling, or table stand for easy deployment in diverse environments.

[Image: A sleek, dark-colored TagLINK Combo device, designed for robust data collection.]

[Graphic: A stylized arrow within a square, indicating direction or signal flow.]

Key Features

  • Near 360 Degrees Energizing Capabilities
  • 12/24V Input Power / USB-C
  • 4G cellular communication / WiFi
  • Designed for Both Automotive and InDoor Use
  • Works With Wiliot Pixels [Wiliot inside]
  • Internal 5/15 Amp battery for mobile operation

Technical Specifications

CategoryDetails
Communication Modules
  • 4G: Global cellular module (4G/3G/2G)
  • Wi-Fi: Client capable of connecting to an external Wi-Fi hotspot.
  • Bluetooth: Low Energy (BLE) communication module for data transmission between the device and Wiliot Pixel Tags or other Gateways.
Antennas
  • Bluetooth 2.4 Ghz / Omni directional
  • RF 868MHz / 915MHz / Omni directional
  • LTE CAT-1 / 3G / 2G (Global) / Optimized embedded
  • WiFi - 2.4GHz 802.11 b/g/n / Optimized embedded
Location ServicesGPS/GLONASS/GALILEO, Active antenna, Sensitivity -165 dBm, NMEA0193. Acquisition times: cold <34s, warm <34s, hot <1s. Accuracy: 2.5m CEP. Embedded optimized antenna.
Connectors4-pin Molex, USB Type C
Transmission Gain
  • Up to +36 (EU) / +33 (NA) dBm for 900 MHz band energizing signal
  • Up to +20 dBm for 2.4 GHz band energizing signal
Power Supply9-32VDC, 5V USB, 3A
Configuration & Firmware UpdateOver-The-Air (OTA) via Wiliot Platform
Dedicated PortsIgnition On/Off, ERM eNET Port
Backup Battery OptionsSlim Case: Accommodates a single 5Ah rechargeable Li-ion battery (charging time up to 20 hours).
Thick Case: Supports two or three 5.3Ah rechargeable 3.6V Li-ion batteries for extended operation.
CertificationsCE, FCC, E-Mark

Environmental Specifications

ParameterValue
Operating Temperature-40 to 75° C
Storage Temperature-45 to 85° C
Dimensions10cm x 14.6cm x 3.5cm
Weight (NET)400g
Durability RatingIP67
Max. Relative Humidity90(±2)%

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are established to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Models: 2AXZU-TAGLINK, 2AXZUTAGLINK, TagLINK Combo Combines Both Bridge and Gateway, TagLINK Combo, Combines Both Bridge and Gateway, Both Bridge and Gateway, Bridge and Gateway, Gateway

File Info : application/pdf, 4 Pages, 3.68MB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html

References

Adobe PDF library 17.00 Adobe Illustrator 29.5 (Windows)

Related Documents

Preview IoTLink Shadow: Wireless Multi-Functional IoT Tracker/Transmitter
ERM's IoTLink Shadow is a compact, battery-powered IoT tracker and cellular gateway for monitoring and asset tracking. It offers low power consumption, wireless implementation, and multiple tracking modes, suitable for various IoT applications.