Contents hide
1 ergotron HX Desk Monitor Arm With VHD Pivot
2 Product Usage Instructions
3 FAQs
4 WHAT IN THE BOX
5 Tools Needed
6 DIMENSION
7 MOUNTING & ASSEMBLY INSTRUCTION
8 Safety
9 MORE INFORMATION
10 CONTACT INFORMATION
11 Documents / Resources
11.1 References
12 Related Posts

ergotron-logo

ergotron HX Desk Monitor Arm With VHD Pivot

ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-product

Product Usage Instructions

Installation:

  1. Ensure you have all the parts listed in the manual.
  2. Identify a suitable location for the product.
  3. Follow the step-by-step instructions provided to assemble the product.

Usage:

  1. Place your device on the stand securely.
  2. Adjust the display angle to your preference.
  3. Use other support features as needed.

Maintenance:

  1. Regularly check for any loose parts and tighten if necessary.
  2. Clean the product with a soft, damp cloth to remove dust and dirt.

FAQs

  • Q: How do I contact customer support?
  • Q: What is the warranty period for this product?
    • Please refer to the warranty information provided with your purchase or visit our website for details.

WHAT IN THE BOX

ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (2)

Tools Needed

ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (3)

DIMENSION

NOTE: Determine if arm will typically collapse to the left or right before installation.

ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (4)

MOUNTING & ASSEMBLY INSTRUCTION

OPTIONAL: Grommet Mount Installationergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (5) ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (6)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (7)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (8)

Rotate – Portrait/Landscapeergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (9)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (10)

Rotating more than 10° may damage thumb screws and/or monitor.ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (11)

ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (12)

NOTE: Arm extension should be at a 45° angle or less when attaching monitor.ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (13)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (14)

Caution: 2 people required to install the monitorergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (15)

WARNING Move Arm to the highest postition before removing equipment or serious personal injury and/or equipment damage may occur.ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (16)

WARNING! Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as soon as the attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been moved to the highest position! Failure to follow this instruction may result in serious personal injury and/or equipment damage!

Adjustment Stepergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (17)

Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or difficult or if product does not stay in the desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your product and the adjustment, it may take many turns to notice a difference. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation.

Lift – Up and downergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (19)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (18)

Increase Lift Strength If the mounted weight is too heavy or this product does not stay up when raised, then you’ll need to increase Lift Strength:ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (20)Decrease Lift Strength If the mounted weight is too light or this product does not stay down when lowered, then you’ll need to decrease Lift Strength:ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (21)

Adjustment may take up to: 35 full 360° revolutions

Tilt – Forward and Backward

ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (22)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (23)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (24)

  • Increase Lift Strength If the mounted weight is too heavy or this product does not stay up when raised, then you’ll need to increase Lift Strength:
  • Decrease Lift Strength If the mounted weight is too light or this product does not stay down when lowered, then you’ll need to decrease Lift Strength:

CAUTION: DO NOT remove the screw. Removing screw may cause damage to equipment.

Monitor Pan – Left and Rightergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (25)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (26)

  • Increase Friction If this product moves too easily, then you’ll need to increase friction:ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (20)
  • Decrease Friction If this product is too difficult to move, then you’ll need to decrease friction:ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (21)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (27)

Caution: Leave enough slack in cable to allow full range of motion. To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.

Safety

Warning: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment.
Caution: Leave enough slack in cable to allow full range of motion. To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.

  • Remove monitors before loosening desk attachment.ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (28)

WARNING! Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as soon as attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been moved to the highest position! Failure to follow this instruction may result in serious personal injury and/or equipment damage!ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (16)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (29)

CAUTION: For Desk Clamp installations: Do Not rotate the display past edge of desk.

Weight Capacity:

ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (30)

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (31)

Rotating more than 10° may damage thumb screws and / or monitor.Rotating more than 10° may damage thumb screws and / or monitor.

MORE INFORMATION

Learn more about ergonomic computer use at: www.ergotron.com/ergonomicsergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (33)ergotron-HX-Desk-Monitor-Arm-With-VHD-Pivot-fig (34)

CONTACT INFORMATION

© 2024 Ergotron, Inc. All rights reserved. While Ergotron, Inc. makes every effort to provide accurate and complete information on the installation and use of its products, it will not be held liable for any editorial errors or omissions (including those made in the process of translation from English to another language), or for incidental, special or consequential damages of any nature resulting from furnishing this instruction and performance of equipment in connection with this instruction. Ergotron, Inc. reserves the right to make changes in the product design and/or product documentation without notification to its users. For the most current product information, or to know if this document is available in languages other than those herein, please contact Ergotron. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of Ergotron, Inc., 1181 Trapp Road, Eagan, Minnesota, 55121, USA Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark of Ergotron, Inc.

Documents / Resources

ergotron HX Desk Monitor Arm With VHD Pivot [pdf] Instruction Manual
HX Desk Monitor Arm With VHD Pivot, HX, Desk Monitor Arm With VHD Pivot, Monitor Arm With VHD Pivot, VHD Pivot

References

Related Posts

Leave a comment

Your email address will not be published. Required fields are marked *