EPOMAKER Cypher96 Type-C RGB Mechanical Gaming Keyboard
1800 Compact Hot-Swappable Bluetooth/2.4G/Type-C RGB
Mechanical Gaming Keyboard with Numpad / Calculator Should you require more assistance, email us at support@epomaker.com
WINDOWS | MAC | |
F1 | Fl | Screen Brightness – |
F2 | F2 | Screen Brightness + |
F3 | F3 | Multi-Task |
F4 | F4 | Mission Control |
F5 | F5 | Search |
F6 | F6 | Toggle Typing Language |
F7 | F7 | Previous track |
FB | FB | Play/Pause |
F9 | F9 | Next track |
F10 | FlO | Mute |
F11 | F11 | Volume- |
F12 | F12 | Volume+ |
FN+F1 | Screen Brightness – | F1 |
FN +F2 | Screen Brightness + | F2 |
FN +F3 | Multi-Task | F3 |
FN+F4 | Mission Control | F4 |
FN +F5 | Search | F5 |
FN +F6 | Toggle Typing Language | F6 |
FN +F7 | Previous track | F7 |
FN +FB | Play/Pause | FB |
FN +F9 | Next track | F9 |
FN + F10 | Mute | F10 |
FN + F11 | Volume- | F11 |
FN + F12 | Volume+ | F12 |
FN+WIN | Lock/Unlock Win Key |
FN + ESC Swap functions of F1, F2, …, F12 and Fn+F1, Fn+F2, … Fn+F12
CONNECTION & OTHER FUNCTIONS
LIGHTS
PAIRING BLUETOOTH
- Toggle the switch to the Bluetooth side, then press Fn+1!/2@/3# to initiate the Bluetooth mode
- Hold Fn+ 1!/2@/3# for 3-5 seconds till the indicator flashes fast, and the keyboard is ready to pair.
- Turn on your Bluetooth device and find “EPOMAKER Cypher 96 -1/2/3”, then connect. When the keyboard is connected to the Bluetooth device, the indicator stops flashing.
- Press Fn+ 1!/2@/3# to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
- Toggle the switch to the 2.4G side, then press Fn+4$ to initiate the 2.4G mode
- Hold Fn+4$ for 3-5 seconds till the first indicator flashes fast, and the keyboard is ready to pair.
- Insert the 2.4G dongle into your device, the first indicator stops flashing green and the connection is done.
Note: The keyboard enters into sleep mode after 2 minutes of inactivity, the keyboard lights go off, and it can be reactivated by any key press.
Specifications
- MODEL: Epomaker Cypher 96
- KEYS AMOUNT: 96
- MOUNTING TYPE: Gasket mount
- CASE MATERIAL: ABS Plastic
- PLATE MATERIAL: PC
- STABILIZER TYPE: Plate-mounted stabilizers
- PCB TYPE: 3/5-pin Hotswap PCB
- BATTERY CAPACITY: 4000mAh+4000mAh
- CONNECTIVITY: Type-C Wired, 2.4 & Bluetooth Wireless
- ANTI-GHOST KEY: NKRO in all modes
- POLLING RATE: 1000hz in Type-C Wired & 2.4G modes
- BACKLIGHTS: South-facing LEDs
- COMPATIBILITY: WINDOWS/MAC
- DIMENSION: 394 × 145 x 43 mm
- WEIGHT: Around 1kg
REPLACING KEYCAPS AND SWITCHES
- For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
- For technical assistance, please email support@epomaker.com with your purchase order number and a detailed description of your issue.
- We normally respond to inquiries within 24 hours.
- If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
WARRANTY
- EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase.
- It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit.
- Replacement units might require you to send the defective unit back to Epomaker.
- We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com).
- Your item will not be covered by your 1-year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.
- We will ONLY cover the item if it is bought from our official stores.
- You do not have a warranty with us if you bought the item from another reseller or likewise.
- Please contact the store that you bought your product from to resolve issues.
CONTACT
APEX CE SPECIALISTS GMBH
- Habichtweg 1 41468 Neuss Germany
- Contact: Wells Yan
- E-mail: info@apex-ce.com
APEX CE SPECIALISTS LIMITED
- 89 Princess Street, Manchester, M1 4HT, UK
- Contact: Wells Yan
- E-mail: info@apex-ce.com
Made in China
- Manufacturer: Shenzhen Changyun Technology Co., Ltd.
- Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road,
- Xili Street, Nanshan District, Shenzhen, Guangdong, CN
- Email: support@epomaker.com
- Web: www.epomaker.com
Documents / Resources
![]() |
EPOMAKER Cypher96 Type-C RGB Mechanical Gaming Keyboard [pdf] User Guide Cypher96, Cypher96 Type-C RGB Mechanical Gaming Keyboard, Type-C RGB Mechanical Gaming Keyboard, RGB Mechanical Gaming Keyboard, Mechanical Gaming Keyboard, Gaming Keyboard, Keyboard |