V-TAC 2 Way Spot Wall Light LED
Instruction Manual
WEEE Number: 80133970
Technical Data
| Attribute | Details |
|---|---|
| MODEL | VT-1186 |
| SKU | 10473, 10474, 23049, 23050 |
| WATTS | 3W*2 |
| LUMENS | 310 Lm*2 [@360°Sphere] |
| INPUT POWER | AC: 220-240V, 50/60Hz |
| BEAM ANGLE | 90° |
| ADJUSTABLE ANGLE | 300° |
| CRI | ≥80 |
| LIFE SPAN | 20,000 Hours |
| MATERIAL | Aluminium+Glass |
| DIMENSION | 105x172x253mm |
Warranty: 2 YEAR WARRANTY*
Rating: IP44 RATING
Introduction & Warranty
Thank you for selecting and buying a V-TAC product. V-TAC aims to serve you best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. For any further queries, please contact your dealer or local vendor from whom you purchased the product. They are trained and ready to serve you. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. V-TAC gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
A QR code was present in the original document to access the manual in multiple languages.
In case of any query/issue with the product, please reach out to V-TAC at: support@v-tac.eu
For more product ranges, please contact your distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
Instructions for the Light
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire should be replaced.
- Proper grounding should be ensured throughout the installation.
♻️ This marking indicates that this product should not be disposed of with other household wastes.
⚡ Caution, Risk of electric shock.
*This product contains a light source of energy efficiency class <E>, where <E> shall be replaced by the energy class of the contained light source.
Installation Diagram
The installation process is depicted in six steps:
- Step 1: Shows a power distribution box with terminals labeled L, N, and Ground. A switch is shown in the 'OFF' position, with a hand indicating it should be turned off.
- Step 2: Illustrates the luminaire body and a mounting bracket, with 'X2' indicating two screws are used to attach the bracket.
- Step 3: Depicts the luminaire base being fixed to the wall using screws.
- Step 4: Shows the wiring connections being made within the power distribution box, connecting the luminaire wires (L, N, Ground) to the supply.
- Step 5: Shows the luminaire body being attached to the mounted base, with 'X2' indicating two screws are used.
- Step 6: Shows the power distribution box again, with the switch now in the 'ON' position, and a hand indicating it should be turned on.
Installation Instructions
- Turn off the power switch.
- Remove the front ring of the lamp.
- Fix the base to the wall with the screws.
- Connect to the power supply according to the drawing.
- Connect the front ring to the base.
- Switch on the power.
Note: The LED light source is only replaceable by a professional.
Disassembly Diagram
The disassembly process is illustrated with numbered steps and arrows indicating movement:
- Step 1: Shows a tool (e.g., screwdriver) being used to remove a component, possibly a cover or screw.
- Step 2: Indicates removal of a component, likely a lens or diffuser, with curved arrows showing it being unscrewed or detached.
- Step 3: Shows screws being removed from the luminaire body.
- Step 4: Depicts the removal of a base or mounting plate component.
- Step 5: Shows the removal of a driver or connector box.
Compliance markings shown include RoHS, CE, and UKCA. Recycling symbols are also present.
