Remo4.207 Audio System
“
Product Information
Specifications
- Power Input: DC12V2A
- Speaker Output: 8W*2
Product Usage Instructions
Power On the Device
To power on the device, ensure that it is connected to a power
source using the provided DC12V2A input. If the device does not
power on, check the power connection and ensure the wire is fully
inserted.
Bluetooth Connection
If you are unable to connect via Bluetooth, follow these
steps:
- Ensure the speaker’s extension cable is properly
connected. - If already connected to other Bluetooth devices, power off,
then power on again to search for Bluetooth pairing. - Avoid connecting beyond 8 meters and through obstacles for
effective connection.
Playing Music
If music is played by another device, check if your phone is
paired with multiple Bluetooth devices. Cancel the pairing of one
device and click the play button on your phone to play music
through this device.
Regulatory Compliance
This equipment complies with FCC radiation exposure limits.
Maintain a minimum distance of 20cm between the radiator and your
body during operation. Do not operate this transmitter in
conjunction with other antennas or transmitters.
Common Troubleshooting
Unable to Power On
Possible Causes and Solutions:
- No power connection.
- The wire is disconnected or the plug is not fully
inserted.
No Sound/Bluetooth Connection Issue
Possible Causes and Solutions:
- The connected socket is faulty.
- The extension cable of the speaker is disconnected; please
check all connections or reconnect them. - Already connected to other Bluetooth devices; power off, then
power on again to search for Bluetooth pairing. - Beyond the effective range; do not connect beyond 8 meters or
through obstacles.
FAQ (Frequently Asked Questions)
Q: How do I reset the Bluetooth connection?
A: To reset the Bluetooth connection, power off
the device, then power on again to search for Bluetooth
pairing.
Q: What should I do if the device does not power on?
A: Check the power connection and ensure the
wire is fully inserted. If the issue persists, contact customer
support for further assistance.
“`
Remo4.207 User Manual Assembly drawing
Instructions
1Connect the product according to the assembly drawing. 2When powered on and enter the pairing state , accompanied by a prompt tone. 3Turn on the Bluetooth function on your phone, search the Bluetooth name ” Remo Audio 4 ” , and pair it. After the pairing is successful, there will be a prompt tone. 4Open the tracks on your phone, play music, and then you can perform music controls such as pause / play, volume down , volume up , previous track, next track, etc. on your phone. 5. Disconnect the Bluetooth connection on your phone, accompanied by a prompt tone.
Remark:
Please note that Bluetooth has a reconnection function.
Product parameters
Power Input Speaker Output
DC12V2A 8W*2
Common troubleshooting
Fault Unable to power on
Possible causes and solutions 1. No power connection. 2. The wire is disconnected or the plug is not fully inserted.
No sound Bluetooth cannot connect
3. The connected socket is faulty. 1. The extension cable of the speaker is disconnected, please check all the connections or reconnect them. 1. Already connected to other Bluetooth devices, power off, then power on again to search for Bluetooth pairing. 2. Beyond the effective range. Please do not connect beyond 8M of this product. Do not try to connect through obstacles.
The music is played by another device
1. As Bluetooth has a back-connection function, please check whether the phone is paired with two Bluetooth devices at the same time, cancel the pairing of one of them, and click the play button on the phone.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Documents / Resources
 |
eMoMo Remo4.207 Audio System [pdf] User Manual 2BHM7-REMO420, 2BHM7REMO420, Remo4.207 Audio System, Remo4.207, Audio System, System |