eKeMP LOGOeKeMP T12 Data Processing MachineeKeMP T12 Data Processing Machine PRODUCT

Function DistributioneKeMP T12 Data Processing Machine FEATURED eKeMP T12 Data Processing Machine FIG 2

Setting Up T12

  1. Power On/OffeKeMP T12 Data Processing Machine FIG 3
  2. ChargingeKeMP T12 Data Processing Machine FIG 4
  3. Dual SIM Card SloteKeMP T12 Data Processing Machine FIG 5

T12 Technical Specification

CPU–       Qualcomm ARM Cortex A53 Octa Core 1.8Ghz
Operation System–          Android 10

–          Firmware Over-The-Air (FOTA)

Memory–          Onboard storage: 16GB eMMC

–          RAM: 2GB LPDDR3

–          External SD Card slot supports Max.=128 GB

Multiple Connectivity–          Wi-Fi: 8.11a/b/g/n/ac 2.4Ghz 5GHz

–          Bluetooth: 4.2 BLE

–          LAN: 10/100M Ethernet

–       2G:  B2/1900;B5/850

–       3G:  B2/B4/ B5

–       4G  LTE: B2 B4 B5 B7 B12 B13 B17 B25 B41

–          Dual SIM

GNSS–          GPS

–          GLONASS

–          Beidou

Touchscreen Display–          Size: 13.3-inch diagonal

–          Resolution:  FHD 1080×1920 Pixels

–          Type: Capacitive multi-touch panel supports double-tap wake up

Fingerprint Scanner–          Optical Sensor

–          500dpi

–          Morpho CBM-E3

Document Scanner–       Supports 82.5mm width paper scanning
1D/2D Barcode Scanner–          Supports 1D/2D barcode, such as High density PDF417,QR code

–          With LED light

Interface–          USB-C port supports USB-OTG

–       2*USB 2.0

–          DC slot

–          RJ45 slot

Rechargeable Battery–          11.1V/13,000 mAh Li-Ion battery

–          MSDS and UN38.3 certified

Integrated Printer–          Thermal Printer

–          Support 80mm width paper roll

–          Auto-cutting

Accessories–          5V/3A charger

–          3* Security Seal tie

MDM–       Mobile Device Management
Certification–       FCC

Safety Information

Pl ease read, understand, and follow all safety information contained in these instructions prior t o the use of this device. Retain these instructions for future reference.
It is expected that all users be fully trained in the safe operation of this T12 Machine.

  • Risk of explosion if battery is replaced by an incorrect type.
  • Do not disassemble, modify or service this device; it contains no user-serviceable parts.
  • Do not use if device, battery, or USB power cord is damaged.
  • Do not use this device outdoors or in wet locations.

INPUT: AC 100 – 240V OUTPUT: 15V /4A
Rated Frequency:50 – 60 Hz

Documents / Resources

eKeMP T12 Data Processing Machine [pdf] User Manual
T12, 2A332-T12, 2A332T12, T12, Data Processing Machine, Processing Machine, T12, Data Processing

References

Leave a comment

Your email address will not be published. Required fields are marked *