Function Distribution
The T12 Data Processing Machine is equipped with various components for its operation. The front view reveals:
- FHD Touch Display: A large, high-definition touch screen for user interaction.
- Fingerprint Scanner: Located to the left of the display, used for biometric authentication.
- Power Indicator: Also on the left, shows the device's power status.
- Smart Card Reader: Positioned below the display for reading smart cards.
- Document Scanner: Integrated above the display for scanning documents.
- Barcode Scanner: Located to the right of the display, capable of reading 1D and 2D barcodes.
- Thermal Printer: Situated below the barcode scanner, prints receipts or other documents.
The rear of the device houses a compartment for the Rechargeable Battery.
The side and rear panels provide access to various ports and slots:
- LAN: For wired network connectivity (10/100M Ethernet).
- TF: A slot for microSD cards, supporting up to 128 GB.
- SIM: Dual SIM card slots for cellular connectivity.
- USB A: Multiple USB Type-A ports for peripherals.
- USB C: A USB Type-C port, supporting USB-OTG functionality.
- DC POWER: The input port for the power adapter.
- Earphone Jack: For audio output.
- Reset: A button to reset the device.
Setting Up T12
The T12 machine can be set up through simple steps:
Power On/Off
To turn the device on or off, press the designated power button, typically located on the side or top of the unit.
Charging
Connect the provided DC power adapter to the DC IN port on the device and plug the adapter into a standard wall electrical outlet to charge the rechargeable battery.
Dual SIM Card Slot
The device supports dual SIM cards. Insert the SIM cards into their respective slots, usually found within a dedicated compartment.
T12 Technical Specification
| Feature | Specification |
|---|---|
| CPU | Qualcomm ARM Cortex A53 Octa Core 1.8Ghz |
| Operation System | Android 10 (supports FOTA - Firmware Over-The-Air updates) |
| Memory | Onboard storage: 16GB eMMC RAM: 2GB LPDDR3 |
| Multiple Connectivity | External SD Card slot (max 128 GB) Wi-Fi: 802.11a/b/g/n/ac (2.4GHz & 5GHz) Bluetooth: 4.2 BLE LAN: 10/100M Ethernet 2G: Bands B2/1900; B5/850 3G: Bands B2/B4/B5 4G LTE: Bands B2, B4, B5, B7, B12, B13, B17, B25, B41 Dual SIM support |
| GNSS | GPS, GLONASS, Beidou |
| Touchscreen Display | Size: 13.3-inch diagonal Resolution: FHD 1080x1920 Pixels Type: Capacitive multi-touch panel with double-tap wake-up support |
| Fingerprint Scanner | Optical Sensor, 500dpi, Morpho CBM-E3 |
| Document Scanner | Supports 82.5mm width paper scanning |
| 1D/2D Barcode Scanner | Supports 1D/2D barcodes, including High density PDF417 and QR code, with LED light |
| Interface | USB-C port (supports USB-OTG) 2 x USB 2.0 ports DC slot RJ45 slot |
| Rechargeable Battery | 11.1V / 13,000 mAh Li-Ion battery (MSDS and UN38.3 certified) |
| Integrated Printer | Thermal Printer, supports 80mm width paper roll, auto-cutting |
| Accessories | 5V/3A charger 3x Security Seal tie |
| MDM | Mobile Device Management support |
| Certification | FCC |
Safety Information
Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future reference. It is expected that all users be fully trained in the safe operation of this T12 Machine.
- ⚠️ Risk of explosion if battery is replaced by an incorrect type.
- ⚠️ Do not disassemble, modify, or service this device; it contains no user-serviceable parts.
- ⚠️ Do not use if the device, battery, or USB power cord is damaged.
- ⚠️ Do not use this device outdoors or in wet locations.
Power Input/Output:
INPUT: AC 100 - 240V
OUTPUT: 15V / 4A
Rated Frequency: 50 - 60 Hz
FCC Compliance
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2A332-T12