901711 Track Plus Starter Set

Product Specifications

  • Product Name: TRACK PLUS-Starter Set x12 MAX
  • Model Numbers: 901753, 901754
  • LED Specifications: 6MM

Product Usage Instructions

Power Supply Installation I

  1. Identify components A1, A1.1, A1.2, A2, A3, A4, A5, A6, and
    A7.
  2. Assemble the power supply components in the following order: A1
    -> A1.1 -> A1.2 -> A2 -> A3 -> A4 -> A5 -> A6
    -> A7.
  3. Connect the power supply to the designated control and gear
    components using the 6mm LED connectors.
  4. Follow the LED specifications for proper connections
    (901683/901706, 901684/901707, 901687/901711).

Deported Power Supply Installation II

  1. Identify components B1, B1.1, B1.2, B2, B3.
  2. Assemble the deported power supply components in the following
    order: B1 -> B1.1 -> B1.2 -> B2 -> B3.
  3. Connect the deported power supply to the designated control and
    gear components using the 6mm LED connectors.
  4. Refer to the LED specifications for correct connections
    (901685/901708, 901686/901709).

Frequently Asked Questions (FAQ)

Q: What should I do if the LEDs are not lighting up after
installation?

A: Make sure all connections are secure and follow the LED
specifications for proper installation. Check the power supply
connection as well.

Q: Can I use a different power supply with this set?

A: It is recommended to use the specified power supply for
optimal performance and safety. Using a different power supply may
not be compatible.

Q: Is it possible to extend the set with additional
components?

A: Yes, you can expand the set by adding compatible components
following the installation instructions provided in the manual.

“`

Installtion Instructions TRACK PLUS-Starter Set

x12 MAX

General Safety Instructions
A warning that it is the user’s responsibility to ensure electrical, mechanical and thermal compatibility between the track systen and luminaires attached to it – Installation and commissioning may only be carried out by authorized specialists. – Recommended use: in dry rooms; – The track Is forbidden to use the track light without an end cap and open connector. bare track ends must be covered with an end cap. – the track is suitable for wall/ceiling mounted,but not suitable for non-horizontal mounting. – The components and luminiares of this system may not be combined with track systems of safety class I or ii or with any other track system. – Safety class III – Operated with safety extra-low voltage. – Load limit is 2kg- The specified admissible mechanical load of the tracks is the total load of a complete system. – The feed-in may only be connected to a SELV supply which is specified to operate components of the safety class III. – Caution: To reduce the risk of overheating and fire do not bridge conductors. – Controller shall only be provided by a SELV source.

901753 901754

X1

X1

X1

X1 X2 X7 X7 1X

X2

X2

901669 901691
901683 901706

X1

X2

X2

X2

4X 4X

X1 X2
901684 901707

X1

X1

901685 901708
X1

901686 901709
X1

901687 901711
X1

20
20 20

CONTROL

+

+

GEAR

901753/901754

LED
901683/901706 901684/901707 901687/901711
6MM

LED
901685/901708 901686/901709

A
A1 A1.1
A1.2

Power supply installtion I
A2
A3 6mm

A4

A5

1

2
3

A6

A7

1

1

1

1

2

3

3

3

3

1 2
A4.2

B
B1 B1.1
B1.2

Deported power supply installation II
B2

B3 6mm

<50cm

B
B4
1
2
3

Deported power supply installation II

B5
1

1

1

1

2

2

2

2

B6 B6.1

1

2

3

2

B6.2

C

Track – straight connection

C1

1

1

1

1

2
3

3

3

3

C2

D

Track – angle connection

D1
1
2

D2

1

1

1

3

3

3

3

87°

E

E1

1

1

2

3

3

Track – cross connection

E2

1

1

3

3

E-Model:A
F
F1
1

E-Model:B
Luminaire installation
F2

F3

2

1

1

F4
When the lamp is installed, the DIP switch is unified on the left to avoid color temperature confusion PS:

Group A

Group B

901687 901711

901683 901706

901684 901707

901685 901708

901686 901709

G
G1
G4
G6

G2

1 3
2
G5

1 32

1 32 G7

21

G8

Cover mounting
G3

OK

Not OK

CRO2032
EN: CAUTION: Contains button cells that can be swallowed! Choking hazard! Keep out of the reach of children.
DE: ACHTUNG! Enthält verschluckbare Knopfzellen! Erstickungsgefahr! Außerhalb der Reichweite von Kindern aufbewahren.
FR: ATTENTION : Contient des piles boutons qui peuvent être avalées ! Risque d`étouffement ! Tenir hors de portée des enfants.
ES: PRECAUCIÓN: ¡Contiene pilas de botón que pueden tragarse! Peligro de asfixia. Mantener fuera del alcance de los niños.
IT: ATTENZIONE: Contiene batterie a bottone che possono essere ingerite e causare soffocamento! Tenere lontano dalla portata dei bambini.
PT: CUIDADO: Contém pilhas-botão que podem ser engolidas! Perigo de asfixia! Manter fora do alcance das crianças.

95 cm

95 cm

10cm 18cm

2Kg 20N

1,90m
/ / / / / / / / / /

1,90m

95cm

10cm 18cm

95cm

4N 4N 4N 4N 4N 4N 4N 4N 4N 4N

Documents / Resources

EGLO 901711 Track Plus Starter Set [pdf] Installation Guide
901753, 901754, 901669, 901691, 901683, 901706, 901684, 901707, 901685, 901708, 901686, 901709, 901687, 901711, 901711 Track Plus Starter Set, 901711, Track Plus Starter Set, Starter Set, Set

References

Leave a comment

Your email address will not be published. Required fields are marked *