eGauge Systems ECSxx-yyy Energy Metering System User Manual
eGauge Systems ECSxx-yyy Energy Metering System

eGauge CT Specifications

Model: ECSxx-yyy
Model

The eGauge ECS series CTs are split-core current transducers (CTs) with 36mm, 20mm, and 9mm openings. CTs are installed around current carrying conductors to measure amperage as part of a power metering solution. Thanks to the split-core design, they are easily retrofitted to existing power systems and do not  require the metered conductors to be disconnected. A 333mV output means no shorting blocks are required. All ECS CTs are UL2808 certified.

eGauge CTs use CTid technology for auto-detection and have an onboard LED which can be used to identify which CT is connected to a given sensor port. This is useful, for example if the CT leads cannot be traced.

ECS36 ECS20 ECS09
Amperage Ratings 400A, 600A 100A, 200A, 300A 50A, 80A
Window Size 36mm (1.42’’) 20mm (0.79’’) 9mm (0.35’’)
Accuracy 1% (ECSxxyyy) or 0.5% (ECSxxyyy-R)
Frequency 50–60 Hz
Wire Lead 8ft (2.45mm), Black/white twisted wire, AWG18 (UL1015 600V)
Overvoltage Category 600V AC, CAT IV 250V AC, CAT III
Dielectric Strength 7400V AC / 1 minute
Operating Temperature –40 to 60 °C –40 to 75 °C
Conditions Indoor use, Pollution Degree 2, Altitude up to 3000m
Output 333mVrms at rated amperage
Certifications UL listed (UL2808, XOBA file #E515923), RoHS, CE pending
UL61010-1, CAN/CSA STD C22.2 NO. 61010-1

Additional Photos

Additional Photos

Dimensional Diagrams [mm]

Dimensional Diagrams [mm]
Dimensional Diagrams [mm]
Dimensional Diagrams [mm]

For more information visit
Qr code
egauge.net/support/m/ecs

www.eGauge.net 720-545-9767 x1 sales@egauge.net

eGauge Systems logo

Documents / Resources

eGauge Systems ECSxx-yyy Energy Metering System [pdf] User Manual
ECSxx-yyy Energy Metering System, ECSxx-yyy, Energy Metering System, Metering System

References

Leave a comment

Your email address will not be published. Required fields are marked *