EDIFIER Comfo C Open Ear True Wireless Earbuds User Guide
Power ON/OFF
Open or close the case to power on/off.
First pairing
- Once powered on, the earbuds will automatically enter Bluetooth pairing mode.
- Select “EDIFIER Comfo C” from your device list to connect.
Pairing for new device
- Place the earbuds in the case and keep it open.
- Press and hold the button on the case for 3s until white and orange LED blink.
Note: For subsequent use, the earbuds will automatically connect to the device used last time.
Multipoint connection
- Pair device A with the earbuds manually and keep the earbuds in the case.
- Re-enter Bluetooth pairing and select “EDIFIER Comfo C” in device B settings to connect.
- Select “EDIFIER Comfo C” again in device A settings to complete the multipoint connection.
Note: For subsequent use, the earbuds will automatically reconnect to the two devices used last time.
Reset
- Place the earbuds in the case and keep it open.
- Press the button on the case 3 times, white LED will blink until the reset is complete.
Charging
Input: 5V
200mA(Earbuds)
5V 1A(Charging case)
Note: Make sure the USB port is completely dry before charging
Controls
Note:
- “x2” double tap; “x3” triple tap;
- Download EDIFIER ConneX App for more customizable control settings.
Documents / Resources
 |
EDIFIER Comfo C Open Ear True Wireless Earbuds [pdf] User Guide Comfo C Open Ear True Wireless Earbuds, Comfo C, Open Ear True Wireless Earbuds, True Wireless Earbuds, Wireless Earbuds, Earbuds |
 |
EDIFIER Comfo C Open Ear True Wireless Earbuds [pdf] Instruction Manual R1 grey, 7e3b4cf4b4c33e4f1368cc93f1d9ff55bbf2, V1.0.1, Comfo C Open Ear True Wireless Earbuds, Comfo C, Open Ear True Wireless Earbuds, Ear True Wireless Earbuds, Wireless Earbuds, Earbuds |
