ECOFLOW STREAM Parallel Cable
Product Information
Specifications
- Product Name: EcoFlow STREAM Parallel Cable
- Model: PH0
- Version: REV 1.0
Applicable to
- EcoFlow STREAM Ultra (used as the example product in this guide)
- EcoFlow STREAM Pro
- EcoFlow STREAM AC Pro
Product Usage Instructions
Connecting the STREAM Devices in Parallel
- Locate the EcoFlow STREAM Parallel Cable.
- Connect the STREAM devices in parallel using the provided cable. Ensure a secure connection.
Connecting the Main Device to the Grid
- Identify the main device and the grid power source.
- Use the parallel cable to connect the main device to the grid power source. Match the PAR and GRID connectors accordingly.
- Ensure all connections are secure before powering on the main device.
- Perform the parallel connection only when the main device is disconnected from your home electrical circuit.
- You can parallel up to 6 devices in a STREAM system.
- Keep the protective cap on any unused terminal.
Frequently Asked Questions
- Q: Can I use the EcoFlow STREAM Parallel Cable with devices other than the EcoFlow STREAM?
A: The EcoFlow STREAM Parallel Cable is designed specifically for use with EcoFlow STREAM devices. It is recommended to only use it as intended to ensure proper functionality and safety. - Q: How do I know if the parallel connection is established correctly?
A: Once you have connected the devices in parallel using the cable, check for indicator lights or status notifications on the devices to confirm a successful connection. Refer to the user manual for specific device indicators.
Documents / Resources
 |
ECOFLOW STREAM Parallel Cable [pdf] User Manual STREAM Parallel Cable, Parallel Cable, Cable |