ECOFLOW STREAM Max Portable Generator
For more details, check the latest user manual or related documents at: https://www.ecoflow.com/support/download
IMPORTANT
- Read all product documentation before use.
- Images are for demonstration only.
Pre-Installation
Check the Package Contents
- The AC outlet on the product and the AC power cable shown in this guide are for illustration purposes. The actual appearance may vary by sales region and product version.
- If any item is damaged or missing, contact EcoFlow Customer Service for assistance.
Standard Product Package for European Region
Standard Product Package for the United Kingdom Region
Product Overview
Appearance
The actual appearance of the AC outlet and the AC power cable may vary by sales region and product version.
Button
LED
Installation Preparation
Tools
Environment
Clearance
Make sure to reserve sufficient clearance for proper heat dissipation.
Installation
Step 1: Mount & Lock (Optional)
Step 2: Connect to Solar Panels
Never connect the leads of a solar panel to different PV terminals to prevent short circuits.
Step 3: Connect to Grid Power
The device must be connected to a grounded electrical outlet or grounding busbar. Additionally, grounding the product casing via its dedicated grounding terminal is recommended for enhanced safety.
Method 1: Direct connection via a home outlet
Method 2: Direct connection via a home circuit breaker (United Kingdom only)
- Professional Installation Required: This step must be carried out by a qualified electrician.
- Power Must Be Off: Before beginning installation, ensure the power is switched off at the installation site.
- The PE and N wires should be connected separately to the PE-bar and Neutral-bar, and the L wire should be connected to the terminal on the breaker that leads to the load side.
Method 3: Indirect connection via an EcoFlow STREAM Max
In this setup, make sure all connected STREAM devices are bound to your EcoFlow account in the app after completing the connection.
Step 4: Utilize AC Outlet (Optional)
- The device has an IP65 ingress protection rating. Use of the AC outlet may affect the ingress protection rating. To minimize exposure to water, place the device close to a wall.
- Ensure the AC outlet cover remains in place when the AC outlet is not being used.
- The actual appearance of the AC outlet may vary by sales region and product version.
Option 1: Supply power to an appliance (Bypass only)
Option 2: Connect to a microinverter to add power input
Step 5: Reinstall the Protective Cover
Post-Installation
Power On
The device turns on automatically when connected to a power source that is supplying power.
Download EcoFlow App
Scan the QR code or search for the EcoFlow app in your mobile application store to download it. Then, register an account and log in.
Bind the Device and Set Up Internet
Follow the in-app instructions to bind the device and enjoy smart control from your phone.
Documents / Resources
![]() |
ECOFLOW STREAM Max Portable Generator [pdf] Installation Guide STREAM Max Portable Generator, STREAM Max, Portable Generator, Generator |