EBTRON SDX-1000 Smart Display Panel
Specifications
- Product Name: IAQ Enforcer Smart Display Panel SDX-1000
- Connection Type: Ethernet
- Supported Cable: CAT-5e or higher
- Power Input: 12VDC
- Manufacturer: EBTRON, Inc.
Product Usage Instructions
Installation Guide:
- Use a standard RJ-45 Ethernet connection (T-568A or T-568B) and CAT-5e cable or higher.
- Connect one end of the Ethernet cable to the SDX-1000 and the other end to a standalone Ethernet network switch. Ensure both ends follow either the T-568A or T-568B standard.
- Ensure SDX-1000 is connected to a standalone Ethernet network and not exposed to non Ebtron approved devices.
- Connect power using the provided 12VDC power adapter.
Note: The USB port is used for system and application updates, as well as certain SDX-1000 features.
Contact Information:
- EBTRON, Inc.
- 1663 HWY 701 South, Loris SC 29569
- Phone: 800-2-EBTRON (1-800-232-8766)
- Website: EBTRON.com Email: sales@ebtron.com
SDX-1000 Wiring Connections
SDX-1000 CONNECTIONS
INSTRUCTIONS TO INSTALLER:
- Use a standard RJ-45 Ethernet connection (T-568A or T-568B) and CAT-5e cable or higher.
- Connect the Ethernet cable on one end to the SDX- 1000 and the other end to a standalone Ethernet network switch. Make sure both ends of the cable are manufactured using either the T-568A or T-568B standard a shown above.
- Both ends of cable must follow the same standard.
- SDX-1000 must be on an stand alone Ethernet network. Do not install on a network that is exposed to non Ebtron approved devices, including the B.A.S.
- Connect power using the provided 12VDC power adapter.
- USB port is used for system and application updates, and certain SDX-1000 features.
- EBTRON, Inc., 1663 HWY 701 South, Loris SC 29569 800-2-EBTRON (1-800-232-8766)
- EBTRON.com sales@ebtron.com
FAQs
Q: Can the SDX-1000 be connected to any Ethernet network?
A: No, the SDX-1000 must be connected to a standalone Ethernet network and should not be exposed to non Ebtron approved devices.
Q: What is the purpose of the USB port on the SDX-1000?
A: The USB port is used for system and application updates, as well as certain SDX-1000 features.
Documents / Resources
 |
EBTRON SDX-1000 Smart Display Panel [pdf] User Guide SDX-1000 Smart Display Panel, SDX-1000, Smart Display Panel, Display Panel, Panel |
 |
EBTRON SDX-1000 Smart Display [pdf] Installation Guide SDX-1000 Smart Display, SDX-1000, Smart Display, Display |
