EASY-LASER XT660 Alignment Solutions
USER GUIDE
The XT660 Alignment System provides maximum flexibility with all XT measurement programs included in one free app. The rugged design ensures durability in harsh environments with an IP66 and IP67 rating.
Long operating times of up to 16 hours for the Display unit and 24 hours for the Measuring units allow users to tackle tough jobs.
Reports can be easily shared via email on all platforms.
Specifications
- Product: XT660 Alignment System
- Alignment system for all important steps of machine
installation - Shaft Alignment
- IP66 IP67 rating for water and dust resistance
Product Usage Instructions
Easy Alignment
- Enter dimensions
- Measure (Five methods available)
- View result, As found
- Adjust
- View report as it will look
Measurement Methods
- Measuring points
- Start recording
- Stop recording
Smart Functions
- Thermal Growth: Automatically compensate for thermal expansion of the machines.
- Swap View: Understand adjustment directions more intuitively.
- Continue Session: Your latest measurement is always available and automatically saved.
- Templates: Save measurement files as templates for quick start of measurements with pre-set machine data and settings.
- Measurement Value Filter: Improve readings in poor measuring conditions.
- Multiple Sets of Feet: Align machines with more than two pairs of feet.
- Locked Feet: Lock any pair of feet on the machine for aligning base-bound or bolt-bound machines.
- Wide Live Adjustment: Adjust with live values using expanded sensor position ranges in the H and V positions.
- Select Machine Image: Choose from different 3D machines to portray your machinery on either side of coupling.
- Select Coupling Type: Choose the method based on coupling type – short flex or spacer shaft.
Measurement Techniques
- Continuous Sweep: Automatic recording of measurement values during continuous sweeping of the shaft.
- Uncoupled Sweep: Rotate one shaft/unit at a time with the beam over the other shaft/unit.
- Multi Point: Record multiple points on the rotated sector for optimized calculations, ideal for turbine and sliding bearing applications.
Frequently Asked Questions (FAQ)
Q: Can the XT660 Alignment System be used in harsh environments?
A: Yes, the XT660 is designed to be rugged and is rated both IP66 and IP67 for water and dust resistance, providing superior durability in harsh environments.
Q: How long are the operating times for the Display unit and Measuring units?
A: The Display unit has an operating time of up to 16 hours, while the Measuring units can operate for up to 24 hours, allowing users to take on and finish tough jobs without interruptions.
A: Yes, reports can be shared via email on all platforms, making it convenient to communicate results with team members or clients.
Documents / Resources
 |
EASY-LASER XT660 Alignment Solutions [pdf] User Guide XT660 Alignment Solutions, XT660, Alignment Solutions, Solutions |
